Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: MACRIUM REFLECT - Create Bootable Rescue USB Drive

06 May 2012   #30
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

hi gugarci. Sounds like you are not having much luck. It is a while since I needed to to this as I now have the paid version but I think I can remember how it goes.

Some questions.

At step 3 did you select the correct architecture for the Netbook x64 x86 etc?
After the download of the WAIK were the messages "mounting the WIM and unmounting the WIM etc displayed in the status area?
Did you get an operation completed popup at the end of the stage?
After you pressed the close button what screens did you get?


My System SpecsSystem Spec
.
06 May 2012   #31
gugarci

Win 7 Pro x 64, Win 7 Starter
 
 

I'm 100% sure I chose 32 bit. As far as the rest is concerned I saw a mounting message, don't recall and unmounting message. I'm going to try it again and make notes of the screens that come up and my responses. I'll post again when I try it. Not giving up yet. But like I said earlier I had no issues at all with the Paragon Linux USB rescue media.
My System SpecsSystem Spec
06 May 2012   #32
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

OK. Thanks.
My System SpecsSystem Spec
06 May 2012   #33
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

A further question.

I notice that your specs say x64. Are you creating this on the Netbook or your x64 Machine?
My System SpecsSystem Spec
.

06 May 2012   #34
gugarci

Win 7 Pro x 64, Win 7 Starter
 
 

I have all my PC's listed in my signature. I have 2 x64 PC's. But the netbook is a Win 7 Starter 32bit.
My System SpecsSystem Spec
06 May 2012   #35
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Yes, but are you creating this on the netbook or one of the x64 machines? If so that could be the problem. On a 64bit machine Macrium would be 64bit and you cannot then create a 32bit PE disk from it.
My System SpecsSystem Spec
06 May 2012   #36
gugarci

Win 7 Pro x 64, Win 7 Starter
 
 

I'm using the Win 7 Starter 32 bit netbook to create the rescue media, and all have failed except for Paragon B&R 2012 free.
My System SpecsSystem Spec
06 May 2012   #37
gregrocker

 

What about Win7 built-in backup imaging? Backup Complete Computer - Create an Image Backup
My System SpecsSystem Spec
06 May 2012   #38
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Quote   Quote: Originally Posted by gugarci View Post
I'm using the Win 7 Starter 32 bit netbook to create the rescue media, and all have failed except for Paragon B&R 2012 free.
I can't think of anything else at present. Perhaps others will have more suggestions.
My System SpecsSystem Spec
06 May 2012   #39
gugarci

Win 7 Pro x 64, Win 7 Starter
 
 

Quote   Quote: Originally Posted by gregrocker View Post
What about Win7 built-in backup imaging? Backup Complete Computer - Create an Image Backup
Does Win 7 Starter have that? And even if it does I'm still going to need to create a bootable usb drive. If it does I'll try it. Also I use Win7 built-in backup imaging along with Macrium in my other 2 Win 7 Pro PC's.
My System SpecsSystem Spec
Comment

 MACRIUM REFLECT - Create Bootable Rescue USB Drive




Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search




Similar help and support threads
Windows 7 Tutorial Category
Macrium create rescue disk question
Since I have a external usb hard drive. Is it possible to put the Macrium rescue boot disk files on there without erasing date? That is where I have my image backup files stored.
Software
Win 7 64 Bit Macrium Reflect Free Rescue Disk
I installed Macrium Reflect Free on my Win 7 64 bit and Win XP 32 bit computers. I now have a problem with the Win 7 computer and cannot restore it. I made the rescue disk on the XP machine thinking it would work on both. Sadly that is not the case. The Macrium site deals only with issues with...
Software
USB stick for Macrium Reflect Rescue for 32 bit and 64 bit.
1.) I just started using Macrium Reflect for Backup and Restore. I have 3-32 bit computers and 1-64 bit computer on my home network. I created a rescue USB stick for one of the 32 bit computers. Can I use this stick to start up any of the 32 bit computers as well as the 64 bit computer? 2.)...
Backup and Restore
Macrium Reflect rescue CD to USB flash drive won't boot
I made a rescue CD iso with Macrium Reflect 5. I used iso2usb to copy the iso to a flash drive booting with the flash drive doesn't work I tried all of this with a Linux option and a Windows PE option ( which asked for WAIK which Macrium installed) but all failed to boot. What am I...
Backup and Restore
Macrium Reflect Linux Rescue CD "RTnetlink answers = file Exist"
Hi, I'm currently using Macrium Reflect Free to backup my Netbook's Drive C: which contains Windows 7. Now I'm trying to see if my backup actually works by trying to restore it through the Linux Rescue ISO from Macrium but since this is a netbook and I don't have an external ODD, I'll make do...
Backup and Restore
Macrium Rescue CD to bootable USB drive?
Hi, Does anyone have any experience in "transfering" the Linux bootable rescue CD to a bootable USB drive? Can it be done? Regards, Golden
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App