Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Make bootable iso from student d/l

23 Oct 2009   #310

It worked for me...

Hi all - 1st post and wanted to chip in...

The instructions in the 1st post worked for me with exception of the oscdimg syntax. I had to use the what Audio posted from the second page of the thread.

oscdimg -bC:\Users\USERNAME\Desktop\expandedSetup\boot\ -h -u2 -m -lWIN_EN_DVD C:\Users\USERNAME\Desktop\expandedSetup\ C:\7.iso

The bolded parts are what you change. WIN_ED_DVD is just the label name I wanted. USERNAME you obviously change for your correct username.

I used imgburn with no additional settings needed - it booted perfectly. Thanks much to all who contributed and SIW2!

My System SpecsSystem Spec
23 Oct 2009   #311


Hi again,

couldn't just anyone upload a working ISO file?

greetz Microcube
My System SpecsSystem Spec
23 Oct 2009   #312



I'm having an issue with the size of the .iso and expandedSetup folders, mine appear to only be 199mb, which obviously isn't the correct size, I'm attempting to re-download the files from Digital River, but if the same thing happens again I'm completely stuck... any ideas?


I re-downloaded and now its 3.01gb as expected, for all those having the same issue, just re-download the files.
My System SpecsSystem Spec
23 Oct 2009   #313

Win 7 Pro 64 Bit

Quote   Quote: Originally Posted by microcube View Post
Hi again,

couldn't just anyone upload a working ISO file?

greetz Microcube

That would be much easier, but uploading an ISO most likely violates MS's license terms. Thus, whomever does it violates those do folks who download it. Even if you were willing to do it, however, *where* would you upload it? Who would host it?

That said, I have heard folks throwing the "torrent" word around....but honestly, creating the ISO was fairly straightforward for most folks. Granted, others have been having a harder I hope MS and digital river come up with a solution soon.
My System SpecsSystem Spec

23 Oct 2009   #314

Win7 RC

I'm runnig Windows 7 RC1 and
tried the OP syntax but it failed
then used the syntax in Audios post on page two
Make bootable iso from student d/l

and the result is below

C:\Windows\system32>oscdimg -bC:\Users\Jerry\Desktop\expandedSetup\boot\etfsboot
.com -h -u2 -m -lWIN_EN_DVD C:\Users\Jerry\Desktop\expandedSetup\ C:\7.iso
OSCDIMG 2.54 CD-ROM and DVD-ROM Premastering Utility
Copyright (C) Microsoft, 1993-2007. All rights reserved.
Licensed only for producing Microsoft authorized content.

Scanning source tree (500 files in 48 directories)
Scanning source tree complete (874 files in 201 directories)
Computing directory information complete
Image file is 2520809472 bytes
Writing 874 files in 201 directories to C:\7.iso
100% complete
Final image file is 2523011072 bytes

On Windows 7 RC1 after the file has made the iso located in C: directory. I right click on it and select "open with> image burner" and then i click burn which makes the bootable DVD.
My System SpecsSystem Spec
23 Oct 2009   #315

vista 32 basic

is it supposed to have 874 or 875 files in the iso?
My System SpecsSystem Spec
23 Oct 2009   #316


I haven't sifted through all the posts since about p15 but the following script worked for me to create the iso from windows xp pro

oscdimg -u2 -b"C:\Documents and Settings\USERNAME\Desktop\expandedSetup\boot\" -h "C:\Documents and Settings\USERNAME\Desktop\expandedSetup" C:\7.iso

When I booted from the disk it appeared to hang for about 5 minutes before letting me choose the language and area settings. After this another period of about 5 mins where I thought it hung then the install began in earnest. 10 minutes later I'd registered and was busy installing all my other progs.

Hope this helps anyone else who is struggling and thank you to all those that have contributed to help those of us that are less tech savvy.

Cheers all...

My System SpecsSystem Spec
23 Oct 2009   #317

windows Vista Ultimate

Hi, I have done everything prescribed successfully and now have a bootable jump drive. Once booted from the jump drive it loads the setup files and takes me to the windows 7 blue background, and after about 5 minutes freezes up. not sure what to do.

This thread has been uber helpful thanks to everyone.

This was a problem with my mother board and not the windows installation. I bought a new mother board and the setup worked beautifully.
My System SpecsSystem Spec
23 Oct 2009   #318

Windows 7
Windows 7 ISO Made Easy

I've found that the easiest (and free) way to make an ISO of Windows 7 from Digital River is with ImgBurn and the Windows 7 USB/DVD Download Tool.

Begin by running the executable that came with the Digital River download, because once you run the file it unpacks everything into a folder called 'expandedSetup.' Once this is done, run ImgBurn and select 'Crate image file from files/folders.' Click 'Browse for a folder' and select 'expandedSetup,' or simply drag 'expandedSetup' to the drop box. Below that is the 'Destination' field, so fill that out too.

This next part is important: Click the 'Advanced' tab on the right, then click the 'Bootable Disk' tab. Check 'Make Image Bootable,' and fill out the information to look like this:
Emulation Type: None (Custom)
Boot Image: '...\expandedSetup\boot\'
Developer ID: Microsoft Corporation
Load Segment: 07C0
Sectors To Load: 8
Then click the large build icon in the lower left corner. It'll ask what to name the disk, I called mine 'Windows 7 Retail.' Once the image has been saved, run the Windows 7 USB DVD Download Tool and select your blank thumb drive (it will be formatted by this software, so back up what you need to if its not empty) and it will be written to the drive. This software also writes to DVD too, so that's another option if all you want is to boot to DVD.

That's it. No crazy command prompt commands or complicated tweaks necessary. I hope you found this helpful, and I apologize for not making it a proper tutorial, but for some reason I cannot seem to do that at the moment. Good luck with Windows 7.
My System SpecsSystem Spec
23 Oct 2009   #319


I made the iso but I can't find it anyone on my computer. Where is it suppose to be?
My System SpecsSystem Spec

 Make bootable iso from student d/l

Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search

Similar help and support threads
Windows 7 Tutorial Category
Make bootable ISO from bootable USB Drive
I have a USB drive with Ophcrack and a rainbow table in it. I can boot from it. I want to make an ISO from it with the table still installed. I'm trying to use it on VMware. I've tried using PowerISO by opening the files and saving them as an ISO. It wouldn't boot.
Make HD WinXP bootable?
Here's the situation: I have Win7 installed on my ultrabook and want XP on it as well. But, since my ultrabook does not have a DVD drive, I can only install XP from the hard drive. So, how would I go about making my HDD XP bootable (on another partition) so I can run XP setup in DOS mode?...
Installation & Setup
How can I make a bootable DVD?
Maybe it's a stupid question,but I can't figure it out how...? At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Win7 build 7048 x64,but it's not a bootable ISO file. I managed to make an ISO,but have never did and don't know how to make a...
Installation & Setup
I don't know how to make a bootable DVD
Hello all. I want to install windows 7. I downloaded it from microsoft. The problem is, I can't do a bootable dvd.. I tried Nero, PowerIso and UltraIso. Any help ?? thanks in advance..
Installation & Setup
Make drive non-bootable.
OK, this is a weird request so here it goes. I had a RAID1-01 set of boot-able 500g drives plus another 500g drive for backup. One of the drives failed so I bought 2 each 1tb drives. Replaced the failed drive and let the RAID1 rebuild. I then decided to replace the good 500g drive with the...
Hardware & Devices
problems with bootable iso & student download
Hullo, I followed the tutorial about creating an ISO image file from the installation files of the downloadable version of Win7 from The Ultimate Steal - I used XP SP3 32bit However the disc won't boot -...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:52.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App