Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Screen Refresh Rate - Custom for NVIDIA Brand

07 Jan 2013   #30

Windows 7 Ultimate x64

Hello Brink,

Thanks for the response... I was reading a lot in the last 2 days and slowly I begin to understand that the refresh rate of my output 1920x1080x32@24Hz is the standard output from the PC to the display. No matter what refresh rate the display is working with.
The reason why I did that was that if I go to 3D mode in a game, I have a latency on my mouse+movements etc.
Even if the 3D mode is off, this latency is there...
I try to fix this problem to have a fluent gaming, but I could not find out until now, what to do.
Fact is, I can connect 2 Outputs on the same Monitor and it has a dual view, so I could use it maybe in this mode. But the question is, how can I enable the 3D mode in the graphics?
My really first try was to contact the LG support by phone, but they didn't even new why I had the same big latency in first place as I connected my PC to the TV. On standard it has a postprocessing on every input signal and I had to disable it manually...
So the point is, that I am looking for a solution to play in 3D with that LG 3DTV in full HD, fluent without latency.
If this is not gonna work with this hardware I am willing to by also (if it is necesarry) a 3D vision shutter system from Nvidia, but the question is, does my Monitor fit the requierments of a 120Hz Monitor, or should I bring back this TV and buy instead complete different stuff... If yes, do you have any suggestions?

Thanks in advance

My System SpecsSystem Spec
07 Jan 2013   #31

64-bit Windows 10 Pro

A TV just doesn't have the same capabilities as a dedicated computer monitor, but they are getting closer.

I see that TV model # has a HDMI input, but didn't see any mention of a DVI input from a PC. You might try using either connection if you have not already.

I'm not an expert for 3D display on a TV from a connected PC game, so you might post this in either the "Gaming" or Graphic Cards area to see if someone may know more and better help.
My System SpecsSystem Spec

 Screen Refresh Rate - Custom for NVIDIA Brand

Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search

Similar help and support threads
Windows 7 Tutorial Category
How to increase screen refresh rate (won't go past 60Hz)
I have a 17-inch Toshiba laptop with a resolution of 1600x900 and a refresh rate of 60 Hz. However, on some backgrounds, I can clearly see my screen flickering. With the preservation of my eyes in mind, it would be greatly beneficial to know if I can increase this or not. I go here: and click...
Graphic Cards
Blue Screen of Death after Sleep ... (Brand new custom build)
Last weekend I built my first home theater PC. It was a lot of fun and everything went smooth until I started getting the Blue Screen of Death. It seems to happen after it wakes up from sleep (S3). It's not always a BSOD but sometimes its a black screen (nothing). After restarting machine it's...
BSOD Help and Support
Q; Screen Refresh Rate: 59 or 60Hz
The refresh rate for my monitor (Acer v223) is 60Hz. In the display ... Monitor window, 59Hz was selected by Windows 7 when detecting the hardware. 60Hz is available as an option (with the modes that this monitor cannot display hidden). -- is there any problem running at 59Hz (no gaming...
Graphic Cards
'wavy' lines across screen (like refresh rate, but not)
I built up a PC a couple of months ago. It has an ok spec, Phenom II 550 x2, NVidia GTX 250, 4b ram, 500gig HD, 620w PSU. Windows 7 Eval. 7100. From the first couple of days I noticed an issue that looked like incorrectly setup refresh rates - there are wavy lines accross the entire screen, and...
Graphic Cards
Screen Refresh Rate - Display Settings
How to Change the Screen Refresh Rate in Windows 7 and Windows 8 This tutorial will show you how to change the screen refresh rate for you monitor to the Hertz rate you want for it in Windows 7 and Windows 8. The refresh rate is the Hertz frequency at which the screen is redrawn. A flickering...
What is refresh rate?
Hi there, I noticed that there was an option to create a new custom resolution on which had 60 Refresh rate , and i could make it higher. What is it? and also, what is Allocation size? When i format , the default is 4096. Thanks, Alex.
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:56.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App