Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SATA Drivers - Slipstream into Windows XP CD

17 Apr 2012   #170
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Hi Winch

OR
You can Copy & Paste the Intel Sata Controller drivers from your Fujitsu AH530 Lifebook, Drivers, Manuals, & Utilities DVD.

-ah530-drivers.png




My System SpecsSystem Spec
18 Apr 2012   #171
mylescdavis

Windows 7 Home 32bit
 
 
Hard drive drivers location

Hi -

I'm trying to install XP as a second boot on a Windows 7 Dell laptop. I've followed all the instructions no problem, up until the driver integration in nLite. I've copied and pasted the partition I created into the Win XP Sata folder I created, but the folder is empty when I go to it to find drivers.

Should I be looking somewhere else?

Sorry if this is a stupid question, I'm not very experienced with Windows machines.

Thanks!
My System SpecsSystem Spec
19 Apr 2012   #172
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by mylescdavis View Post
Hi -

I'm trying to install XP as a second boot on a Windows 7 Dell laptop. I've followed all the instructions no problem, up until the driver integration in nLite. I've copied and pasted the partition I created into the Win XP Sata folder I created, but the folder is empty when I go to it to find drivers.

Should I be looking somewhere else?

Sorry if this is a stupid question, I'm not very experienced with Windows machines.

Thanks!
What partition?

If you downloaded F6 Sata Controller drivers from the web, did you unzip the download?

Have you looked at using XP Mode, Virtual Player, VMWare, or Virtual Box.
Windows XP Mode - Install and Setup
My System SpecsSystem Spec
21 May 2012   #173
Erotomaniac

Windows 7 Ultimate 64bit
 
 

Hi Theog,

Same question as most.

I have an H67m Asrock mobo running Win 7 64bit. Which file on the ff page do I get to slipstream in the XP boot disk?:

ASRock > Products > Motherboard > H67M > Download


Thanks for the help!
My System SpecsSystem Spec
.

21 Jul 2012   #174
slowturtles

7 32 bit
 
 

Hi, I have a HP mini 311-1033CA

I have gotten to 100% format but it froze there. After waiting an hour, I restarted the netbook, rebooted from the disc, and received the "setup did not find any hard disk drives..." I have slipstreamed all the drivers from Software & Driver Downloads HP Mini 311-1033CA PC - HP Customer Care (United States - English)

and this NVIDIA DRIVERS 15.56WHQL

I however have only slipstreamed the windows xp version from the hp site and both windows 7 32-bit and windows xp versions from the nvidia site. I still get the "setup did not find..." message. Help please?
My System SpecsSystem Spec
25 Jul 2012   #175
ilkbaharkunduzu

Windows 7 Ultimate x64
 
 

hi,

I am trying to make an installation CD as it is instructed in this section. When I insect (single driver) there are 2 files.
"iaAHCI" and "iaStor" . Which one should I choose?

THE SYSTEM
Windows® 7 Home Premium (64 bit)
Intel® PM55 Express Chipset
Intel® Core™ i7-740QM
Ram: PC3-10600 - DDR3 SDRAM - 1333 - 8GB
Serial ATA

The web adress: Specifications

Thanks in advance
My System SpecsSystem Spec
17 Oct 2012   #176
AndyH54

Windows 7 Home Premium 64 bit
 
 
XP install crashes after first reboot

My rebuilt PC runs Windows 7 Home Premium 64 bit with the BIOS set to AHCI. I would like to dual boot with XP so that my sons can still play some of their old XP games.

Following the tutorial, I slipstreamed the Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller which I downloaded from the Asus website into Windows XP SP3.

The initial setup runs fine but at the first reboot the system crashes just as it gets to the XP GUI interface.

When I first used my regular XP installation disk I got the BSOD during initial setup so slipstreaming the SATA driver has allowed setup to progress further.

I can install XP when I change the BIOS to IDE but then Windows 7 crashes.

Any ideas what else I could try to get XP to install in SATA (AHCI) mode?
My System SpecsSystem Spec
22 Oct 2012   #177
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by AndyH54 View Post
My rebuilt PC runs Windows 7 Home Premium 64 bit with the BIOS set to AHCI. I would like to dual boot with XP so that my sons can still play some of their old XP games.

Following the tutorial, I slipstreamed the Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller which I downloaded from the Asus website into Windows XP SP3.

The initial setup runs fine but at the first reboot the system crashes just as it gets to the XP GUI interface.

When I first used my regular XP installation disk I got the BSOD during initial setup so slipstreaming the SATA driver has allowed setup to progress further.

I can install XP when I change the BIOS to IDE but then Windows 7 crashes.

Any ideas what else I could try to get XP to install in SATA (AHCI) mode?
As you have a uEFI BIOS & 8 gb of ram, Win XP 32bit is not supported.
Have you looked at using XP Mode, Virtual Player, VMWare, Virtual Box.
Windows XP Mode - Install and Setup
My System SpecsSystem Spec
22 Oct 2012   #178
ComputerKid

Windows 7 Home Premium 32-bit
 
 

Most counterfeit copy of Windows XP (in Indonesia) already contained generic SATA driver.
My System SpecsSystem Spec
22 Oct 2012   #179
AndyH54

Windows 7 Home Premium 64 bit
 
 

I ended up by initially installing XP in IDE mode on a spare second hard disk which I installed in the computer. I then followed the method in this link to install the correct SATA AHCI driver for my motherboard and then change the BIOS to AHCI:

http://h20000.www2.hp.com/bizsupport...ctID=c03101776

Having now got XP installed in AHCI mode on my spare hard disk, I made an image backup of it and restored the image to a separate partition on my Windows 7 hard drive. Finally, I downloaded a program called EasyBCD which made it simple to add XP to the master boot record.

A bit long winded perhaps, but I can now dual boot XP and Windows 7.
My System SpecsSystem Spec
Comment

 SATA Drivers - Slipstream into Windows XP CD




Tutorial Tools






Similar help and support threads
Windows 7 Tutorial Category
Create slipstream install usb w/drivers/updates?
I purchased a new SSD and doing a fresh install. I am curious if it would be easier or ideal to create an installation disk/usb with all the added windows updates and drivers for my system(if possible)? Originally I had Windows Vista Ultimate and then upgraded to Windows 7 Ultimate. So, I have the...
General Discussion
Slipstream SATA drivers into XP setupCD,which driver to be chosen,pls?
Hell All, I am trying to slipstream SATA drivers into Windows XP setup CD for dual boot with window 7 following this tutorial in method two (window 7 is installed first) http://www.sevenforums.com/tutorials/72185-sata-drivers-slipstream-into-windows-xp-cd.html . at step 12 to...
Installation & Setup
SATA driver for Windows XP Slipstream
I would like to try installing a dual boot of Windows XP Professional x86 with Windows 7 Professional x64 on a single hard drive. I gave up last time but decided to try one last time. My question is about the SATA driver for my Seagate Barracuda HD. Now, the XP Professional x86 I am going...
Installation & Setup
Possible to slipstream all W7 drivers to XP CD?
I'm new to slipstreaming and my question isn't really how to slipstream (there are great tutorials here I've been reading) but rather if it's possible to copy the drivers from my W7 DVD to essentially make XP installable on newer hardware and capable of detecting with newer hardware and devices. ...
Drivers
Slipstream Drivers and N-light.
Ok, I'm currently in the process of setting up xp as a dual boot option on my windows 7 rig. Since im running in RAID I needed to slipsteam the drivers for xp via nlight. (which I did) I slipstreamed them via txt mode and am now currently burning the disc. Do I have to do anything to get...
Drivers
How to slipstream graphics drivers
I have the Intel Q45/Q43 Express Chipset on my Asus P5Q-EM DO motherboard. Video drivers installed with Windows Beta 7057 worked perfectly but when I clean-installed Windows 7100 RC, the drivers were updated to a newer version and now my desktop and background video gets totally corrupted after...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App