Windows 7 Forums


Windows 7: Ram - Change (Laptop)


Ram - Change (Laptop)

How to Change Ram in a laptop
Published 04 Apr 2010
Published by

Featured Tutorial

Make Windows 7 bootable after motherboard swap
Make Windows 7 bootable after motherboard swap

Paragon P2P Adjust OS - Make Windows 7 bootable after motherboard swap

Portable OS - Carry your OS on an External Drive
Portable OS - Carry your OS on an External Drive

How to Create a Portable OS on an External Drive

Troubleshooting Windows 7 Failure to Boot
Troubleshooting Windows 7 Failure to Boot



PCIe Link State Power Management - Turn On or Off in Windows
PCIe Link State Power Management - Turn On or Off in Windows

How to Turn On or Off PCIe Link State Power Management in Windows

Windows 7 Installation - Transfer to a New Computer
Windows 7 Installation - Transfer to a New Computer

How to Transfer your Complete Windows 7 Installation to a New Computer
How to Change RAM in a Laptop

information   Information
Ever wanted to ugrade your ram on your laptop, but dont know how to do that? Follow this easy guide then


Note   Note


For this you will need:

* Ram sticks supported by your Laptops motherboard (Run SIW to find out). Also they have to be Laptop ram sticks and not desktop ram sticks

* A laptop

* A screwdriver which matches the screws needed to be screwed out to access the motherboard





warning   Warning
Remember to shut down your pc, unplug it and remove the battery! (note, i forgot to remove the battery below )

Also press the power button after removing the battery to filter out any charge still in the laptop




Getting Access to the motherboard/Ram Sticks


1. Turn over your laptop, and find the place where you can access your motherboard from.


2. Unscrew the screws, and remove the plate. You're now ready to install your new ram.

Installing the new Ram


1. First remove the old ram, this is done by clicking it out by dragging the two pin at each site further out, the ram should pop-up when doing this

2. Now put in the new Ram stick, and press it down to your hear a click


3. You have now installed the ram stick and you can go on to the next step


Finishing Up

1. Put the plate back to where it was before you started

2. Screw the screws in again

3. Put the battery in the Laptop

4. Turn over the Laptop

5. Turn on the PC and now your newly installed ram should show when you run SIW or speccy inside Windows




Thats it Good luck guys






Need more help? Try searching our extensive help and support site.
Loading
Comment

 Ram - Change (Laptop) problems?



Tutorial Tools



Similar help and support threads for: Ram - Change (Laptop)
Windows 7 Tutorial Category
Can i change my laptop's processor? Hardware & Devices
I cannot change the background on my laptop!!! Help... Customization
Is it possible to change the CPU in a laptop? Hardware & Devices
How to change OS XP for Windows7 laptop General Discussion
New laptop with 32 bit, change to 64 bit Installation & Setup


All times are GMT -5. The time now is 11:33 PM.



Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd