Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Dual Boot Installation with Windows 7 and XP

20 Feb 2011   #1140


Quote   Quote: Originally Posted by redeyedbass View Post
Thanks for the tutorial, great job.

BUT... Using method two, I can never actually finish the XP set up.

You know when the XP setup copies a bunch of files to the target drive and reboots (then the system should boot off the XP partition to complete the set up) ?

Well, I get the "Error loading OS" message. I fix it with the tip in the yellow section, Windows 7 boots again but the XP installation was never completed.

All I have in the partition is this WINXP folder and that's it.

Win7 is on a SATA SSD drive and the target drive for XP is IDE.

EasyBCD does not recognize a Windows XP installation there, quite expectably since the installation is not complete.

So, what am I doing wrong ?

Wipe the IDE drive using Diskpart "Clean All" command from Win7 elevated Command Line: Disk - Clean and Clean All with Diskpart Command

Unplug the Win7 HD, boot XP CD to partition and full format, install directly to IDE drive by itself.

After install plug back in Win7 HD, set preferred HD as first HD to boot in BIOS setup, then boot the other HD using one-time BIOS Boot Menu key (F8, ESC or DEL on Asus'). This keeps the HD's independent to come and go as you please.

If you prefer a WIndows-managed Dual Boot which interlocks HD's, install EasyBCD 2.0 to Win7 to Add XP.

My System SpecsSystem Spec
20 Feb 2011   #1141

Windows 7 Enteprise x64 SP1

Your use of "first HD" and "the other HD" got me confused. Can you clarify ?

Right now, I managed to get XP installed on its own hard drive/partition while the SSD drive that has Win7 was unplugged. When I plugged back the Win7 drive, I went in the BIOS and made the SSD drive top priority at boot. So I am writing this from Win7.

But EasyBCD still does not recognize the XP partition though.

Thanks alot for you rhelp.
My System SpecsSystem Spec
20 Feb 2011   #1142


Now try booting the XP HD using the one-time BIOS Boot Menu.

On Asus boards, the key to tap at startup for Boot Menu is F8, ESC or DEL. Try each until you get a boot menu, then choose the XP HD to boot.

See if this method for Dual Booting suits you.

If not, what happens when you try to Add XP using EasyBCD 2.0 from Win7?
My System SpecsSystem Spec
21 Feb 2011   #1143

Windows 7 Enteprise x64 SP1

Can't boot XP. Windows 7 took it upon itself to go on my other HDD's XP partition and tell it to look for Win7's boot manager. So now I am getting "BOOTMGR is missing" when booting XP.

I wonder how much of Win7's cost is due to paying engineers to put in those very undesirable behaviours...

EDIT: OK, I've managed to copy to the root of the XP partition NTLDR, NTDETECT.COM + a valid boot.ini so from the BIOS boot menu, I can choose which OS I want. EasyBCD still does not detect Windows XP though.

Anyways, you've been of great help.
My System SpecsSystem Spec

21 Feb 2011   #1144


When Win7 is installed second while XP HD is attached, it writes its boot files to XP while configuring the Dual Boot.

This is why it's better with separate HD's to keep the one OS unplugged when installing another, then boot either via the BIOS Boot Order or one-time BIOS Boot Menu. This keeps the HD's independent to come and go as you please.

It sounds like you've got both booting via BIOS now which is optimal.

I am not sure why EasyBCD won't add XP. It will not be detected on front listings page until you Add New Entry by type, name and drive.
My System SpecsSystem Spec
22 Feb 2011   #1145

Windows 7 Ultimate x64

My first post, so Hello All

To the point.

Windows 7 (64bit & ahci) on disk samsung (500GB, only one partition, check screen #3).
Under Disk Management I've created new ~20GB partition.

Created floppy disk with sata/ahci drivers. Booted pc from winxp cd. Installed drivers, choose new partition for xp (performed a quick ntfs format). Absolutely no problems during the installation. After the installation, reboot, automatically loaded winxp (all according to the plan), every thing worked fine. No problems with disks size detection etc. Reboot, inserted win 7 dvd, fix my computer->choose win 7 installation->fix autostart->successfully repaired. Reboot, win 7 loaded without any problems. Opened (in administrator mod) newest EasyBCD, and here starts my problem.

I can't add a new entry with my winxp - check screens #1, #2, #4. Obviously, when I reboot, win 7 is automatically loading.

Any idea, that wouldn't require further re-installation?

Thx in advance

Attached Thumbnails
Dual Boot Installation with Windows 7 and XP-untitled1.png   Dual Boot Installation with Windows 7 and XP-untitled2.png  
Attached Images
Dual Boot Installation with Windows 7 and XP-untitled.png Dual Boot Installation with Windows 7 and XP-untitled3.png 
My System SpecsSystem Spec
22 Feb 2011   #1146

Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)

If I remember correctly (forgive if I am wrong) but you cannot boot Windows XP off a logical partition.
My System SpecsSystem Spec
22 Feb 2011   #1147

Windows 7


first you need to Assign drive letter to system reserved drive (100mb in size)
(assign any drive letter its temporary)

After you need to Find & copy, ntldr & boot.ini files to System reserved drive.

Next in EasyBcd Add new entry
select Type Windows NT
UN-check box Automatically detect correct drive
Add Entry

Reboot to check.
(Once its done you can remove system reserved assigned drive letter)

best of luck
My System SpecsSystem Spec
22 Feb 2011   #1148

Windows 7 Ultimate x64

So i gues, that the fixing tool from win 7 dvd, deleted boot file and chenged partition type to logical. Is that normal?


I have found and ntldr on my win xp cd, but I coulndt find boot.ini - so I created my own:

[boot loader] 
[operating systems] 
multi(0)disk(0)rdisk(0)partition(1)\WINXP="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptInM

Is it ok? I have chenged windows to winxp (check screens).

Thx for your help, guys
My System SpecsSystem Spec
22 Feb 2011   #1149

windows 7 pro 32

Hi, I have windows 7 on my laptop. I created a primary partition for XP but when I try to load it I get a message that says "windows can not find any drives on this computer". What part of the tutorial did I miss?

Attached Thumbnails
Dual Boot Installation with Windows 7 and XP-sshot.png  
My System SpecsSystem Spec

 Dual Boot Installation with Windows 7 and XP

Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search

Similar help and support threads
Windows 7 Tutorial Category
Dual Boot Installation with Windows 7 and Vista
How to Setup a Dual Boot Installation with Windows 7 and Vista This will show you how to install Windows 7 and Vista to dual boot with when you already have either Windows 7 or Vista installed first.With a dual boot installaton, you will have two operating systems (OS) installed. When you start...
Dual Boot Installation with Windows 7 and 7 on 2 separate HDD
1. I have Windows 7 (64 bit) ALREADY installed on a SINGLE hard drive. 2. I have a clean blank other SINGLE hard drive upon which I will install Windows 7 (32-bit). 3. Please understand this is TWO individual hard drives, I want an Operating System installed on each individually. (win7 on ONE,...
Installation & Setup
Dual Boot Installation with Windows 7 and XP
I used to have a computer with Windows XP on which I could use Microsoft Works 2002 "Picture It 7". I now have a laptop with Windows 7 which does not have Microsoft Picture It and I believe that application was discontinued. I still have the old software but cannot use it with Windows 7 only with...
General Discussion
Re-installation of Windows 7/64 on SSD from Dual Boot
Hello, I'll give the "2 cent version" of my situation. I have a dual-boot system (XP on mechanical HDD / Win 7/64 Pro on SSD). Recently, I had a series on infections damage my XP installation irrepairably and it is now time to move everything over to 7. I've just purchased a larger SSD to...
Installation & Setup
dual boot windows 7 and xp installation problem
Hi, I tried installing windows xp on my dell laptop running windows 7.The installation started but soon i got the error message "setup is stopping to prevent any damage to your computer.check your hard drive to make sure its configured sfc on your hard drive etc etc ...
Installation & Setup
Can't Get a Dual-Boot Windows 7/Ubuntu Installation Going
I have two hard drives on my computer, one for my OS and apps (C:), and one for my data (D:). I recently reformatted my C: drive, re-installing Windows 7. I want to set up a dual-boot system with Ubuntu 10.04. The problem I am having is that the Ubuntu installer recognizes my D: drive but not...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:07.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App