Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 Sp-1 Update Fatal Error

17 Feb 2011   #1
McPC

Vista, Windows 7
 
 
Win7 Sp-1 Update Fatal Error

Downloaded the SP1 Update today from Microsoft and immediately installed it on my work system without any issues besides the 1hr 20 min. it took to complete. 64bit OS AMD Quad Processor.

However, I installed it on my home system this evening, same 64bit OS but Intel quad processor and during the reboot process I got the the black win7 start up screen and below the logo it started showing files being updated and then froze with fatal error C0190001 file 498 of 97524 (bfsvc.exe)

Let it sit for another 40 minutes or so and figured it was never going to budge from that screen it froze on so I did a hard reboot. And then tried system restore and even then I got a exception error and message that restore failed. After trying another time with the same result upon the re-boot I was surprised that my system booted normally and when I got to my desktop there was a message saying system restored! Whew.

Not sure what went wrong and just may eventually go the route of a new install with SP1 rolled in already.

My home system is also unable to successfully install the Microsoft SQL Server 2008 Service Pack 2 (KB2285068) update either.


My System SpecsSystem Spec
.
18 Feb 2011   #2
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

Are you able to access Safe Mode (f8)?
My System SpecsSystem Spec
18 Feb 2011   #3
McPC

Vista, Windows 7
 
 

Quote   Quote: Originally Posted by DeanP View Post
Are you able to access Safe Mode (f8)?
Never needed to boot into safe mode. After the hard boot i had the option screen to either Repair startup or boot normal. Choose the repair startup twice followed by a couple attempts at a system restore (both of which reported the restore failed) but I clicked the wrong dialogue box to try again and my computer went to reboot. I let it take its course and to my surprise it booted normal to my desktop pre SP-1.
My System SpecsSystem Spec
.

21 Feb 2011   #4
lafargeotte

Win7 Ultimate x64, Windows 8 Enterprise x64
 
 

Were you able to install SP1 again?
My System SpecsSystem Spec
21 Feb 2011   #5
sandman

Window's 7 Ultimate 64bit
 
 

If SP1 is a cumulative update of all past updates why would we want to install the SP1 at this point in time. I am only going to use it for new install so i do not have to download and install all the past updates.
My System SpecsSystem Spec
21 Feb 2011   #6
Phone Man

Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
 
 

Quote   Quote: Originally Posted by sandman View Post
If SP1 is a cumulative update of all past updates why would we want to install the SP1 at this point in time. I am only going to use it for new install so i do not have to download and install all the past updates.
SP1 also has hundreds of Hot Fixes that were not offered through updates but were only available through a manual download.

Jim
My System SpecsSystem Spec
21 Feb 2011   #7
Tarka Dal

Stools
 
 

Quote   Quote: Originally Posted by McPC View Post
Downloaded the SP1 Update today from Microsoft and immediately installed it on my work system without any issues besides the 1hr 20 min. it took to complete. 64bit OS AMD Quad Processor.

However, I installed it on my home system this evening, same 64bit OS but Intel quad processor and during the reboot process I got the the black win7 start up screen and below the logo it started showing files being updated and then froze with fatal error C0190001 file 498 of 97524 (bfsvc.exe)

Let it sit for another 40 minutes or so and figured it was never going to budge from that screen it froze on so I did a hard reboot. And then tried system restore and even then I got a exception error and message that restore failed. After trying another time with the same result upon the re-boot I was surprised that my system booted normally and when I got to my desktop there was a message saying system restored! Whew.

Not sure what went wrong and just may eventually go the route of a new install with SP1 rolled in already.

My home system is also unable to successfully install the Microsoft SQL Server 2008 Service Pack 2 (KB2285068) update either.

Why are you installing RC SP1 when RTM SP1 is available today???
My System SpecsSystem Spec
22 Feb 2011   #8
McPC

Vista, Windows 7
 
 

Quote   Quote: Originally Posted by Runckle View Post
Quote   Quote: Originally Posted by McPC View Post
Downloaded the SP1 Update today from Microsoft and immediately installed it on my work system without any issues besides the 1hr 20 min. it took to complete. 64bit OS AMD Quad Processor.

However, I installed it on my home system this evening, same 64bit OS but Intel quad processor and during the reboot process I got the the black win7 start up screen and below the logo it started showing files being updated and then froze with fatal error C0190001 file 498 of 97524 (bfsvc.exe)

Let it sit for another 40 minutes or so and figured it was never going to budge from that screen it froze on so I did a hard reboot. And then tried system restore and even then I got a exception error and message that restore failed. After trying another time with the same result upon the re-boot I was surprised that my system booted normally and when I got to my desktop there was a message saying system restored! Whew.

Not sure what went wrong and just may eventually go the route of a new install with SP1 rolled in already.

My home system is also unable to successfully install the Microsoft SQL Server 2008 Service Pack 2 (KB2285068) update either.

Why are you installing RC SP1 when RTM SP1 is available today???
Not sure what made you think I installed the RC of SP-1; I installed the final RTM version SP-1.

To answer lafargeotte question:

I did not try to install SP1 again since I o not feel I'll have any better luck the second time around and I'm waiting to see how others deal with this issue once SP1 is rolled out to the general public. I'm quite sure I will not be alone with this issue.
My System SpecsSystem Spec
22 Feb 2011   #9
Tews

64-bit Windows 8.1 Pro
 
 

Recovery images are such a wonderful thing!!
My System SpecsSystem Spec
22 Feb 2011   #10
sandman

Window's 7 Ultimate 64bit
 
 

Here is a link with other links telling all about SP1 and its install me my self will only be using it for a clean install to get all the updates installed from the beginning and not have to go through installing all of the ones to date. I am going to switch the Laptop to an Intel SSD and install Windows 7 64 bit with SP1 Ultimate on the new SSD.

What's included in Windows 7 Service Pack 1 (SP1)
My System SpecsSystem Spec
Reply

 Win7 Sp-1 Update Fatal Error




Thread Tools






Similar help and support threads
Thread Forum
Win7 home update fails, error 8007370B - cannot update, install SP1.
Running Windows 7 Home Premium x64 Cannot update, attempting to upgrade to Win 7 professional. Discovered automatic updates were fried for some time and the system did not have SP1, which is apparently required for the upgrade. I see similar threads, each seems to require advanced...
Windows Updates & Activation
Fatal error C0000034 applying update operation 174 of 68677 (_0000...)
I keep getting this when trying to start my Advent notebook (I have Windows 7 home starter), and I can't do startup repair because it just freezes during 'Windows is loading files', in major need of help :(
General Discussion
Win7 Ultimate Update Failed to Win7 Sp1 Error Code 80073701
Hello I'm Having Problem Updating My Windows 7 Ultimate into Windows 7 Ultimate SP1 I Tried Using System Update Readiness Tool for Windows 7 (KB947821) But an Error Pops Up Please HELPP!!:cry:
Windows Updates & Activation
Multiple Update Failures / Win7 x64 - Unable to Update, Error 800b010
My problems are essentially those expressed in many previous posts, but specifically this one here was most pertinent (aside from the specific updates of course): http://www.sevenforums.com/windows-updates-activation/155225-win7-x64-unable-update-error-800b0100.html Here is a list of the updates...
Windows Updates & Activation
Fatal Error C0000034 applying update operation 236 of 93422
Last night I downloaded the upgrades and before I went to sleep I ran the upgrade. This morning I woke up and my upgrade progress had froze (couldn't move mouse even) and I had to go to class. I would leave it run but last time I left my computer on for a while it nearly overheated, so I had to...
Windows Updates & Activation
Fatal Error Installing Update
I installed the updates for my computer, but instead of shutting down my computer for it to do its "applying updates" thing before it shuts down, i reseted it and forgot about the updates. Now whenever i try to boot my win7, it tries to install updates but stops and says "Fatal error C0000034...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App