Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SP1 error's 800F081F & 800F0A13

24 Feb 2011   #1

windows 7 64 bit and dual boot Pinguyos
 
 
SP1 error's 800F081F & 800F0A13

Hi, been getting both these error's on my laptop and Pc.
I managed to install SP1 on the laptop, updated ATI drivers, used the Windows 7 update tool and after numerous attempts got it on. however on the PC it's a no go, I got rid of the 800F081f error but cant seem to get the 800F0A13 to go, the only solution i can find is to reinstall windows and i am not about to do that!!!.
Any one any bright ideas Please.

Raz

My System SpecsSystem Spec
.

24 Feb 2011   #2

Windows 7 & Windows Vista Ultimate
 
 

Hi, razy60.

Have you used Driver Sweeper to clean ATI - Display drivers? There is an issue with Windows 7 SP1 install resulting in the Error 800F0A13. If that is the case, please follow the instructions here: Windows 7 Service Pack 1 / Driver Sweeper.
My System SpecsSystem Spec
25 Feb 2011   #3

Windows 7: Home Premium
 
 
Same

Hi, How did you get rid of the error message 800F081f, 'cos I get that error code and I cant find any answers online.

Thanks.
My System SpecsSystem Spec
.


25 Feb 2011   #4

Windows 7 & Windows Vista Ultimate
 
 

Hi, ownedandout.

Here's the same question I asked razy60:

Have you used Driver Sweeper to clean ATI - Display drivers? There is an issue with Windows 7 SP1 install resulting in the Error 800F0A13. If that is the case, please follow the instructions here: Windows 7 Service Pack 1 / Driver Sweeper.
My System SpecsSystem Spec
26 Feb 2011   #5

windows 7 64 bit and dual boot Pinguyos
 
 

Hi, Ownedandout i used the update tool from microsoft, ran a full system scan with MSE and installed the SP1 update before any of the other updates that were available at the time.
As for the driver sweeper tool yes i have used it but only when i changed my GPU from nvidia to ATI so i dont see why there should be a problem however i am following the thread(cheers corrine).

Raz
My System SpecsSystem Spec
26 Feb 2011   #6

Windows 7: Home Premium
 
 

Hi, Thanks for the reply razy60.
I've just managed to install SP1. I too have used Driver sweeper and that is what was causing the errors. On the website corrine linked us to I registered and made a few posts, my account is MaggotUK and and my posts start on page 4. If you look at the advice given to me by HarryMcddogle this is how we fixed it. Hope this helps.

Thanks again.
My System SpecsSystem Spec
26 Feb 2011   #7

Windows 7 & Windows Vista Ultimate
 
 

Quote   Quote: Originally Posted by razy60 View Post
Hi, Ownedandout i used the update tool from microsoft, ran a full system scan with MSE and installed the SP1 update before any of the other updates that were available at the time.
As for the driver sweeper tool yes i have used it but only when i changed my GPU from nvidia to ATI so i dont see why there should be a problem however i am following the thread(cheers corrine).

Raz
Hi, Raz.

I learned from Andre.Ziegler's posts at TechNet that it apparently does not matter that the tool wasn't used to remove ATI drivers. As Andre.Ziegler said in Windows 7 SP1 fails with Code 800F0A13 - Says system components are missing (even referencing the tutorial here at Seven Forums ):
Quote:
check this link:

Windows 7 Service Pack 1 (Page 1) / Driver Sweeper / Phyxion.net Forums
otherwise also do the InPlace upgrade.
the link from sevenforums shows you with pictures how to do it.

Next time, DON'T USE THIS CRAPPY driver cleaner.

{Bold added}
When the person he was helping responded with:
Quote:
"This is only for ATI - Display, other drivers are not affected! If you haven't used Driver Sweeper to clean ATi - Display drivers and you are having this problem with SP1 the problem with your system is something else"
Since I don't have ATI, (I have never had ATI on this computer, only NVidia).... does that mean I should do the InPlace upgrade?
Andre instructed:

Quote:
copy the files from the topic to the WinSxS folder. The drivers are aprt of Windows, so it doesn't matter which card you have. If the drivers are missing, Sp1 fails.
Also note from that topic Froztbound's post regarding extracting drivers from the original Windows 7 DVD and using the tutorial here for how to do it.
My System SpecsSystem Spec
26 Feb 2011   #8

Windows 7 & Windows Vista Ultimate
 
 

Quote   Quote: Originally Posted by ownedandout View Post
Hi, Thanks for the reply razy60.
I've just managed to install SP1. I too have used Driver sweeper and that is what was causing the errors. On the website corrine linked us to I registered and made a few posts, my account is MaggotUK and and my posts start on page 4. If you look at the advice given to me by HarryMcddogle this is how we fixed it. Hope this helps.

Thanks again.
Congratulations and thank for sharing the information on your solution. But, "MaggotUK"? Yuck. Couldn't you have selected a better username?
My System SpecsSystem Spec
26 Feb 2011   #9

Windows 7: Home Premium
 
 

Quote   Quote: Originally Posted by Corrine View Post
Quote   Quote: Originally Posted by ownedandout View Post
Hi, Thanks for the reply razy60.
I've just managed to install SP1. I too have used Driver sweeper and that is what was causing the errors. On the website corrine linked us to I registered and made a few posts, my account is MaggotUK and and my posts start on page 4. If you look at the advice given to me by HarryMcddogle this is how we fixed it. Hope this helps.

Thanks again.
Congratulations and thank for sharing the information on your solution. But, "MaggotUK"? Yuck. Couldn't you have selected a better username?
Haha, it goes back to when I was a big Slipknot fan, they used to call their fans maggots.
My System SpecsSystem Spec
27 Feb 2011   #10

windows 7 64 bit and dual boot Pinguyos
 
 

Hi, fixed the previous errors now getting 0x800f0826

Raz
My System SpecsSystem Spec
Reply

 SP1 error's 800F081F & 800F0A13




Thread Tools



Similar help and support threads for2: SP1 error's 800F081F & 800F0A13
Thread Forum
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a BSOD Help and Support
missing components for sp1 update error code 800f0a13 Windows Updates & Activation
Windows 7 Ultimate 32-bit Error Code 800F081F Windows Updates & Activation
Scan Error Error while Scan::0::LEAD Error: Twain source manager no Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error? BSOD Help and Support
sp1 error code 800F081F Windows Updates & Activation
SP1 x64 Home Premium Upgrade Error: Code 800F081F Windows Updates & Activation

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:01 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33