Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Why power fail EID 41 when sleeping after SP1

09 Mar 2011   #1

Windows 10 Pro. EFI boot partition, full EFI boot
Why power fail EID 41 when sleeping after SP1

If your boot device uses a SCSI miniport driver (like with my on-board 6Gb/s SATA Marvell chip), and if you have hybrid sleep mode option enabled (so that hiberbation is involved), after SP1 you are probably wondering why instead of sleeping your computer is now shutting down uncleanly with a Event ID 41 kernel-power fail, unclean shutdown of windows. See this thread:

I resolved my issue by disabling the hybrid sleep mode, but there is a hot fix available from Microsoft for this issue. I plan on trying it tonight:

A crash memory dump file is not created, or hibernation does not work, when you use a SCSIport miniport driver as the startup device driver in Windows 7 or in Windows Server 2008 R2

UPDATE: I applied the hotfix, reenabled hybrid mode, and all is well now.

My System SpecsSystem Spec
18 Mar 2011   #2

windows 7 home permium 64 bits

THANKS Iwell try it when i get home thanks agen!!!
My System SpecsSystem Spec
29 Mar 2011   #3

Windows 7 64bit

Fantastic! I had roughly the same problem, two night struggling, and even removed hybrid sleep / hybernate.

Every time I attempted to hibernate, the PC switched off prematurely. The fix proposed here fixed the problem and everything is running fine.

Thanks very much!
My System SpecsSystem Spec

09 May 2011   #4

7 Ultimate x64

Thanks. Worked perfectly.

For info: This issue occurred several weeks after SP1 installation. Apart from usual patch Tuesdays there was no change to the OS - so why it "just went" I'm afraid I can't say. Event ID 41 was the give away.

My System SpecsSystem Spec

 Why power fail EID 41 when sleeping after SP1

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
driver power state faillure -sleeping mode-ntoskrnl.exe-window8
Hello everyone and thank you in advance for reading this thread, I have BSOD situation for a while. When I hibernate or put my computer asleep and leave this mode my computer freeze for a while before showing of a BSOD with driver power state faillure. I have windows 8 sometime it start...
BSOD Help and Support
BSOD Driver Power State 0x109f - blue screens when sleeping
I've attached the SF diagnostic files that have the blue screen. 90% of them are for driver power state failure with ntoskrnl.exe being the culprit. I'm not really concerned with the others. There's going to be BSOD, I just want to stop the majority of them. This is almost always caused by...
BSOD Help and Support
BSOD every other day, driver power state fail
I finally got a chance to catch this BSOD just a few minutes ago. It seems to happen after my laptop sleeps and I resume Windows, but I am not entirely sure. The other times it has happened while I was away and I'd come back to a freshly restarted PC.
BSOD Help and Support
Updates Fail, Slow Response, Fail to Connect to a Windows Service, etc
Hi, l've been having a constant issue with my computer and I can't seem to get out of this trouble no matter how many times I reinstall and even wipe out my hard drive. I wiped out everything in my hard drive and installed windows 7 Ultimate for the '7th' time, and the same problems happen every...
Windows Updates & Activation
Win 7 crash - SP1 fail - repair install fail
I am really stuck. My installation of Win 7 Ultimate has a problem. It will not install SP1, occasionally dies with the BSOD, sfc shows corrupt files that it cannot repair, start up repair from the repair disk cannot repair problems, and a repair install from the OEM disk terminates before it...
BSOD Help and Support
(Another) ntoskrnl power fail BSOD
It has happened the last few times I have shutdown/restarted my computer. I am almost 100% sure it is due to a driver Microsoft pointed me too that updated (and supposedly) fixed my usb 3.0 stuff on my motherboard...:cry: I am almost certain due to the fact that I hadn't had these errors up until...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:05.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App