Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unable to update to SP1 on Win7 64bit Pro

28 Jan 2012   #21
SysWrecker

Windows 7 64bit Pro
 
 

Never late. Though it didn't help me, perhaps someone with a similar issue will benefit from it. Had I know it could have saved me some hassle.


My System SpecsSystem Spec
.

30 Jan 2012   #22
DarkS7ar

Win 7 x64 Ultimate
 
 

Ok, sorry to post so late but it was a long trip home.
Anyway I replaced the .dll file, ran SFC
reran the URT
Included is both logs.


Attached Files
File Type: zip Logs.zip (91.0 KB, 9 views)
My System SpecsSystem Spec
31 Jan 2012   #23
SysWrecker

Windows 7 64bit Pro
 
 

I've done a quik look at the logs, nothing really pops out, will have another look tomorrow. It was a long day.
My System SpecsSystem Spec
.


02 Feb 2012   #24
SysWrecker

Windows 7 64bit Pro
 
 

Your logs still show it complaining about termsrv.dll. Did you replace it?

Code:
2012-01-30 21:25:31, Info                  CSI    00000169 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-01-30 21:25:34, Info                  CSI    0000016c [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-01-30 21:25:34, Info                  CSI    0000016d [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2012-01-30 21:25:34, Info                  CSI    0000016f [SR] Verify complete


2012-01-30 21:31:47, Info                  CSI    000002fb [SR] Beginning Verify and Repair transaction
2012-01-30 21:31:47, Info                  CSI    000002fd [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-01-30 21:31:47, Info                  CSI    000002ff [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-01-30 21:31:47, Info                  CSI    00000300 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2012-01-30 21:31:47, Info                  CSI    00000302 [SR] Repair complete
2012-01-30 21:31:47, Info                  CSI    00000303 [SR] Committing transaction
2012-01-30 21:31:47, Info                  CSI    00000307 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction  have been successfully repaired
On your cbs.log you can run the command findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt to get to the root of your issues. You can also change the [SR] to Error to see specific errors.
My System SpecsSystem Spec
02 Feb 2012   #25
DarkS7ar

Win 7 x64 Ultimate
 
 

Yes, I did change it. I will do so again, and repost the logs.
One thing I did notice was after I changed it, rebooted, and did the checks. My Firefox slowed to a crawl and froze quite a bit. I don't know if that's related, but I wanted to document everything.
My System SpecsSystem Spec
02 Feb 2012   #26
DarkS7ar

Win 7 x64 Ultimate
 
 

having switched the file again, and restarted, I'm once again noticing a significant slowdown during use of not just Firefox but of other things.
A friend of mine had this same problem, and he said it was a corrupted Windows Media file and the only solution was to reinstall Windows. I was trying to avoid that. The only reason I bring it up was because in order to replace this file the second time around, I had to go in and stop the Remote Desktop Services which was using the termsrv.dll file and it told me in stopping it that it would also stop, among other things, the Media Center Extender Service.
My System SpecsSystem Spec
03 Feb 2012   #27
SysWrecker

Windows 7 64bit Pro
 
 

Do you use either the Remote Desktop Service or the Media Center Extender?

I know I always run with the Remote Desktop Service set to Manual and I never turn it on. If your system is bogging down after swapping out that file, if you temporarily disable the service does it speed back up?

It's also looking like the easiest way to go to solve your issue would be an in place upgrade.
My System SpecsSystem Spec
03 Feb 2012   #28
DarkS7ar

Win 7 x64 Ultimate
 
 

I do use the Media Center Extender to stream things to my Xbox 360, that's what started all of this. I wanted to put my movies and tv shows in separate folders in WMC but it doesn't support that, so I tried to install a recommended 3rd party program, it said it required SP1... and here we are.

How would I go about upgrading, since afaik I'm running the top level of Win7?
My System SpecsSystem Spec
06 Feb 2012   #29
SysWrecker

Windows 7 64bit Pro
 
 

My System SpecsSystem Spec
Reply

 Unable to update to SP1 on Win7 64bit Pro




Thread Tools





Similar help and support threads
Thread Forum
Win 7 Home Premium 64bit Unable to run windows update SP1
AS I said in the title, I am having problems installing windows updates. I have reformatted 3 times and get the same errors at the same spot. I ran SURT and then tried to update, but it still didn't work. Here are the files I believe you need to help me. Thank you.
Windows Updates & Activation
Unable to update Windows 7 Ultimate 64bit Service Pack 1
I am not talking about updating to Service Pack 1. I had a thread similar to this earlier in the week, but I started a new thread as I have more information. (I had to replace my SSD, that's why I needed to install Windows again (I did NOT activate Windows with old SSD)) I don't know if this...
Windows Updates & Activation
Multiple Update Failures / Win7 x64 - Unable to Update, Error 800b010
My problems are essentially those expressed in many previous posts, but specifically this one here was most pertinent (aside from the specific updates of course): http://www.sevenforums.com/windows-updates-activation/155225-win7-x64-unable-update-error-800b0100.html Here is a list of the updates...
Windows Updates & Activation
No outgoing e-mail after win7 64bit update?
No outgoing e-mail after win7 64bit update? Hi guys,Yesterday after much hesitation I decided to apply the windows 7 service pack 1 for 64bit. I had hesitated in applying this update after hearing rumours that it may cause internet connectivity problems. After completing the update I indeed...
Browsers & Mail
Unable to connect the printer (hosted on the XP) from the Win7 64bit
Hi all, I'm running the win7 64bit, the printer is connected to the XP. That printer is not a network printer (Hp 5740,and 5520) , and shared from a Desktop running WinXP 32 bit. I cannot install it via network access ? can anyone have any idea about that problem. Pleave give me any advise....
Hardware & Devices
Unable to find crossfirex after win7 update
I had installed a fresh windows 7 on my machine and did all the updates. But i had noticed that my video cards were not working together any more, so i went to the ATI CCC to find crossfireX to inable it, only to find that it was no longer on the list of opitions. I have went to the task tray and...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App