Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Installing Windows 7 64bit Service Pack 1, Error "D_S_S_SUCCESS(0x0)"

09 Apr 2012   #1
Damerae

Windows 7 Home Premium 64bit
 
 
Installing Windows 7 64bit Service Pack 1, Error "D_S_S_SUCCESS(0x0)"

Hello!

I recently purchased a 128gb Crucial M4 SSD.

The other day my father and I sat down together to work on setting up the SSD as my OS drive. We installed Windows 7 64bit Home Premium successfully on the drive. There were no issues until I started to install drivers liberally rather then conservatively.

While installing ~101 Window's Updates, I impatiently started installing my XFX Radeon 6870 drivers. This caused a crash and a blue screen to appear. After rebooting the system in Safe Mode, everything appeared fine. However, my video card drivers were in a weird funk. After some research, I resolved the issue and my video card drivers were all working and installed successfully.

The big problem now is that when trying to Install Service Pack 1, I get an error code upon reboot that says "D_S_S_SUCCESS(0x0)". During the installation of Service Pack 1, the install stops about half-way and wants me to reboot the system, so I do. Rebooting the system is when I get the error code. The screen that pops up says that the install was unsuccessful.

I've looked around on Microsoft's website to find some help. So far I've performed the following tasks:

  • Downloaded a tool by Microsoft called Mrfixit.
  • I've ran troubleshooting that attempts to fix windows update.
  • I've ran disk cleanup to delete temporary files, which won't even delete everything...
  • I've uninstalled any virus software
  • System Update Readiness Tool
  • I've tried renaming the systems distribution folder... (Was this bad?) When I renamed my systems distribution folder to SDold... it created another one... Should I delete my systems distribution folder? Is there anyway to revert this? I hope I didn't ruin anything by doing this.
I have no clue what to do next to fix this issue. I'm really concerned I'm damaging my Solid State Drive by all this constant rebooting and installing/uninstalling.

I really hope I have not made any mistakes.

Would it bad for the Solid State Drive to just reinstall the operating system and wipe it clean?

Thank you for your time


My System SpecsSystem Spec
.

10 Apr 2012   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

Please post your CheckSUR.log file, and a copy ofyour CBS.log file.
Since you are still at an early stage, it may be quicker and easier to simply reinstall - it would probably be less damaging than repeated attempts to install SP1

This time, I would recommend updating Windows first, in batches (do the Security updates first, and leave all .NET updates until last - do not install the Recommended updates until all Important ones are in)Once Windows is up to date, install an AV, and any needed drivers (from the manufacturer's site).
My System SpecsSystem Spec
Reply

 Installing Windows 7 64bit Service Pack 1, Error "D_S_S_SUCCESS(0x0)"




Thread Tools





Similar help and support threads
Thread Forum
Win7 - Windows Update Error "Service is not running"
Hello, can someone here please kindly help me with my problems re Windows Update --- I have tried to run Windows Update on my computer and received the following error message: I have tried the Windows Update Troubleshooter for Windows 7 from "Windows Update Cannot Check For Updates"...
Windows Updates & Activation
Error 8024200D while installing Windows 7 Service Pack 1 x64 KB976932
Hello, I'm trying to install Windows 7 Service Pack 1 x64 KB976932 but i keep getting Error 8024200D. 1) did start SFC Scan 5 times - no noticeable error notified. "Windows Resource Protection did not find any integrity violations." 2) downloaded the "System Update Readiness Tool for...
Windows Updates & Activation
KB976932 "Windows 7 Service Pack 1" Installed Again Today??????
On my 7 machine where the OS was installed including SP1 anyway, in comes this update today which I think is rather odd. Anyone have any explanation for the apparent anomaly? :sarc:
Windows Updates & Activation
Windows 7 Service Pack 1 for x64-based Systems (KB976932) "FAILED"
Hi can someone please help! I have 2 important updates that keep failing, I have spent hours trying to sort it and now hours trying to register on here and follow all the instructions to try fixing and logging my actions etc, and Im getting nowhere! Ive done everything it said to do but I cant...
Windows Updates & Activation
"Failed to connect to a windows service" error message
I am aware this a problem that has been addressed multiple time on this forum and others but am unable to come up with a solution from previous posts. I am running Windows 7 Ultimate x64, and have been for years. I have had no problems previously that I was unable to fix. This morning...
Network & Sharing
Service Pack 1 Beta "Evaluation Copy" notice
Is it possible to remove the text put on my desktop of "Windows 7 Evaluation Copy Build 7601"? This appeared after installing SP1 beta. I do not want to remove the beta service pack, just the text on my desktop because it annoys me. If it is difficult to do and/or illegal I won't do it as it would...
Windows Updates & Activation

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App