Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x000000ED after win7 splash screen. Cant use install disk to repair.

25 May 2012   #11
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Dawn,
Carry out the instructions given in thread post #7.

Supply responses to the questions asked there, in addition to carrying out the procedures given there.


My System SpecsSystem Spec
.
25 May 2012   #12
DawnRazor

Windows 7 Home Premium 64bit
 
 

Hi there, I can't boot the repair disk as previously reported. I ran Seatools for DOS which reports bad sectors, but will not repair them or attempt to as it is not a Seagate drive. My system as reported in my profile has a Seagate drive, the one I am trying to fix is a Toshiba satellite, as reported in the OP. Do you know of any utilities that can boot from CD in the style of Seatools that are not manufacturer dependant, or that works with Toshiba drives?
My System SpecsSystem Spec
25 May 2012   #13
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

and the manufacturer of the drive in the toshiba is ?

If you do not know with 100% certainty,then visit the Toshiba site.
Toshiba Support - Homepage

Make a System Repair Disc on a system that has the same bittiness as yours, in other words,
If the toshiba is a 32 bit system then go to a 32 bit system.
If the toshiba is a 64 bit system then go to a 64 bit system.
Use this procedure:


=========================================================
=========================================================
CREATE A SYSTEM REPAIR DISC

START | type System Repair | Enter key | Create Disc button



Now you will be able to run chkdsk using the system repair disc.
My System SpecsSystem Spec
.

26 May 2012   #14
DawnRazor

Windows 7 Home Premium 64bit
 
 

The Toshiba is 64 bit as well, so no issues there. The drive is reported as Toshiba in Seatools, the sticker on the drive says Toshiba as well, there is no indication of any other manufacturer on the drive itself, anod the UK website reports no other info than 320 GB 5400 Toshiba drive. The model of the Laptop is Satellite C650 1CR.
I can only boot into Linux or DOS utilities, and none of them are able to read the disk or repair it. Seatools came the closest to providing useful information, 3 bad sectors were indicated in the long test, but it wouldn't attempt to repair them as I'm sure you're aware.
My System SpecsSystem Spec
26 May 2012   #15
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Boot from partition wizard bootable disk (ISO)
Partition Wizard Bootable CD allows user to manage partition directly with partition manager bootable CD.

How to get MiniTool Partition Wizard Bootable CD
Download MiniTool Partition Wizard Bootable CD iso file absolutely FREE from http://www.partitionwizard.com/download.html. Burn ISO file onto a CD using any CD/DVD Burner software.


Direct link: http://www.partitionwizard.com/download/pwhe7.iso

Boot from it and do: How to Check File System? Partition Wizard Video Help.

Does it find errors? Can it fix it?
My System SpecsSystem Spec
26 May 2012   #16
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Well I suggest you go to the Toshiba website to get a disk test program from their drive.

On your desktop system:
1. disconnect the external drive.
2. remove the drive from your laptop.
3. connect the laptop drive as a 2nd drive to your desktop,
4. run chkdsk over the laptop drive.

How you connect, etc to your desktop, you will need to get the documentation on your motherboard for that one.
My System SpecsSystem Spec
26 May 2012   #17
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
Well I suggest you go to the Toshiba website to get a disk test program from their drive.

On your desktop system:
1. disconnect the external drive.
2. remove the drive from your laptop.
3. connect the laptop drive as a 2nd drive to your desktop,
4. run chkdsk over the laptop drive.

How you connect, etc to your desktop, you will need to get the documentation on your motherboard for that one.
@karlsnooks: Partition Wizard Boot disk can do chkdsk as well! Saves him a lot of work... opening laptop and swapping drives.
My System SpecsSystem Spec
31 May 2012   #18
DawnRazor

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by karlsnooks View Post
Well I suggest you go to the Toshiba website to get a disk test program from their drive.

On your desktop system:
1. disconnect the external drive.
2. remove the drive from your laptop.
3. connect the laptop drive as a 2nd drive to your desktop,
4. run chkdsk over the laptop drive.

How you connect, etc to your desktop, you will need to get the documentation on your motherboard for that one.
@karlsnooks: Partition Wizard Boot disk can do chkdsk as well! Saves him a lot of work... opening laptop and swapping drives.
Tried Partition Wizard, but unfortunately the check disk option was greyed out. I can see myself using this in the future though so thanks for that.
I have bought a hot swappable HDD dock, and when I booted up my main machine with the laptop attached it automatically came up with the 'one of your disks needs to be checked for consistancy' message and ran a chkdsk. I ran a full scan of the drive with Malwarebytes which found some adware but not much else.
It booted the laptop first time! Crystaldiskinfo is reporting 3 Current sectors pending. Hopefully it'll be ok for at least a while. I've made the restore media already just in case it does go pop, and will do a full system image once Windows is fully updated. Somehow they never managed to get past SP1!
Anyway thanks to everyone who posted suggestions, you've all been very helpful.
My System SpecsSystem Spec
31 May 2012   #19
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Have you managed to install SP1?
My System SpecsSystem Spec
31 May 2012   #20
DawnRazor

Windows 7 Home Premium 64bit
 
 

I had it fail with error 800B100, something to do with missing windows files it says. So I have downloaded the hotfix that seems to relate to that error. Now that that is done Windows update now sees 20 updates instead of just one (SP1) and I am trying to install them now. Will let you know how I get on.
My System SpecsSystem Spec
Reply

 0x000000ED after win7 splash screen. Cant use install disk to repair.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win7 Repair Disk Download
Remember, we used to all link to the Neosmart website for 32 bit and 64 bit ISOs of the win7 repair disks? Unfortunately, those links no longer work and some of us were scratching our heads. So, anyway I found new links: {LIVE LINKS REMOVED} These are from this page: Create a...
Installation & Setup
Win7 OS physical disk for repair?
I cannot believe that I'm the only person that runs into this problem. So here I am asking the community. I've run into problems with the machine that are clearly related to corrupted chunks of the OS. Restore points do not go back far enough. Only an image from very long ago would likely...
Performance & Maintenance
System crash, repair no work, can't get beyond Windows splash screen
No matter what I do, I can't get into Windows. That includes Safe Mode. Therefore I can't get error dump info. Windows repair can't fix it. Repair result: Fail. Error code 0x4005. Ran repair over 7 times. Restore won't work ... says I need to set protected mode. Can't boot... how can I...
BSOD Help and Support
Windows 7 install freezes at mainboard splash screen
I'm sorta stuck. I was trying to install windows 7 on another volume in my windows xp machine. I don't know if I was supposed to change in BIOS to the new volume or not, but I didn't. During the installation process when windows 7 rebooted the first time, it hangs at the mainboard splash...
Installation & Setup
Change of monitor, no BIOS splash, Win7 splash now Vista one....
Not sure if this is the right place to post this but anyway... Quite a while ago i swapped my old 19" monitor for my older Samsung 24" LCD 720P TV, its not bad as a monitor but i have a few issues. Since then i am unable to access the BIOS since my BIOS splash does not display so i cannot see...
Hardware & Devices
Windows 7 Freezes at Install Splash Screen
I just got Windows 7 Pro 32 bit as a early Christmas gift and was excited to try the new OS. I have been running XP pro for years and my current system works great. I backed up my files and tried to load it on a RAID 0 configuration. It started just fine then it got to the splash screen and froze....
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App