Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Latest update blocks IE9

12 Jul 2012   #1

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Latest update blocks IE9

When I install the latest Windows update (Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems [KB2719177]) and then reboot, it blocks IE9 and makes it freeze while loading, so that I am unable to access the internet. When I restore to a point before the update installation, IE9 works fine again. I am running Win 7 Home Premium 64.

*and I'm not illiterate. For some reason this forum keeps spelling my title with "blockes."

My System SpecsSystem Spec
.

17 Jul 2012   #2

Windows 7 Ultimate x64
 
 

Welcome churchilllafemm!

What happens if you try using the 64-bit version of IE?

I've installed the recent updates on a few Windows 7 64-bit machines and have not run into this issue. You might try rolling back to that restore point, follow the instructions in the tutorial below, and then reinstall the updates.

SFC /SCANNOW Command - System File Checker

By the way, your thread title appears to have been corrected. So I'll no longer question your level of literacy!
My System SpecsSystem Spec
17 Jul 2012   #3

Windows 7 Ultimate x64 SP1
 
 

Please update your system specs and provide the model of your HP computer.
My System SpecsSystem Spec
.


17 Jul 2012   #4

MS Windows 7 Ultimate SP1 64-bit
 
 

church,

Here's how to update those specs. They will travel with you and always be available to us at each and every post. Very handy and very necessary.

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
My System SpecsSystem Spec
19 Jul 2012   #5

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thank you, but scannow did not find any problems.
My System SpecsSystem Spec
19 Jul 2012   #6

MS Windows 7 Ultimate SP1 64-bit
 
 

church,

carry out following and upload the resulting computerinfo.txt file.

# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script:
function get-ID 
  
param ([string]$title, [int]$arraycnt, [int]$arrayndx
  
$id " " $title " "
  
If ($arraycnt -ne 1) {$id $id + [string]$arrayndx " "}
  
$id }
function 
get-title param ([string]$id
  
$hashes = ([int](51 $id.length)/2)
  
$hashstr '#' $hashes
  $title 
$hashstr $id $hashstr
  
If ($title.length -le 51) {$title += "#"}
  
$title  }
$sterne "*" 79
$obj 
= New-Object PSObject
$bios 
gwmi win32_bios
$id 
get-id "BIOS" 1 0
$obj 
Add-member -membertype noteproperty -name (Get-title $id ) -value $sterne
$obj 
add-member -membertype noteproperty -name ($id "Name") -value($bios.name)
$obj add-member -membertype noteproperty -name ($id "Manufacturer") -value($bios.manufacturer)
$obj add-member -membertype noteproperty -name ($id "Release Date") -value($bios.converttodatetime($bios.releasedate))
$obj add-member -membertype noteproperty -name ($id "Serial Number") -value($bios.SerialNumber)
$CS  gwmi Win32_ComputerSystem   
$id 
get-id "COMPUTER SYSTEM" 1 0
$obj 
Add-member -membertype noteproperty -name (Get-title $id) -value $sterne
$obj 
add-member -membertype noteproperty -name ($id "Manufacturer") -value($cs.manufacturer)
$obj add-member -membertype noteproperty -name ($id "Model") -value($cs.model)
$obj add-member -membertype noteproperty -name ($id "Primary Owner") -value($cs.primaryownername)
$obj add-member -membertype noteproperty -name ($id "Type") -value($cs.systemtype)
$obj add-member -membertype noteproperty -name ($id "Total Memory") -value(([string][int]($cs.totalphysicalmemory/1073741824) + " GB"))
$obj add-member -membertype noteproperty -name ($id "User Name") -value($cs.username)
$CSprod  gwmi Win32_ComputerSystemProduct 
$obj 
add-member -membertype noteproperty -name ($id "Product Name") -value($csprod.name)
$obj add-member -membertype noteproperty -name ($id "Version") -value($csprod.version)
$obj add-member -membertype noteproperty -name ($id "Identifying Number") -value($csprod.identifyingnumber)
$obj add-member -membertype noteproperty -name ($id "Vendor") -value($csprod.vendor)
$obj $env:userprofile\desktop\COMPUTERINFO.TXT

EXIT
EXIT 
My System SpecsSystem Spec
20 Jul 2012   #7

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
church,

carry out following and upload the resulting computerinfo.txt file.

# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
[/php]
When I do this, all I get is:
PS C:\Users\John>

No other script.
My System SpecsSystem Spec
20 Jul 2012   #8

MS Windows 7 Ultimate SP1 64-bit
 
 

church,
The script is the part in the box that is scrollable.

You copy and paste the entire script into PowerShell.
My System SpecsSystem Spec
20 Jul 2012   #9

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

COMPUTERINFO.TXT is saved on the desktop. You only need to copy the script, and then right-click in PowerShell to execute it.

It doesn't appear the Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems [KB2719177] isn't blocking access to IE9, unless you picked up a bit of malware, perhaps?

Malwarebytes' Anti Malware
Microsoft Security Essentials
avast! Free Antivirus
My System SpecsSystem Spec
20 Jul 2012   #10

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
church,
The script is the part in the box that is scrollable.

You copy and paste the entire script into PowerShell.
There is nothing else in the box. I can scroll the whole length, and it's empty otherwise.
My System SpecsSystem Spec
Reply

 Latest update blocks IE9




Thread Tools



Similar help and support threads for2: Latest update blocks IE9
Thread Forum
Issue with latest W7 update? Windows Updates & Activation
Windows 7 SP1 Update Blocks Software Adding Context Menu Software
BIOS - Incremental updates to latest vrsn or direct update to latest? Drivers
Error on latest silverlight update and .net framework update Windows Updates & Activation
SP1 Update blocks driver Windows Updates & Activation

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:29 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33