Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 x64 will no longer boot properly after innstalling SP1

14 Jul 2012   #1
Tharayman

Windows7 64bit ultimate SP1
 
 
Win7 x64 will no longer boot properly after innstalling SP1

Hi my 3 day old Win7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.

This is how the screen looks when I try booting.

[IMG]http://s11.**************/eoi2b1vbn/IMAG0029.jpg[/IMG]

I have tried all safety moodes, last known good config. Debugging mode.
The Win7 DVD(tells me the chosen OS version can not be repaired), none of these options helped.
What else can I try to get past this madness?

Could this be the punishment for not getting genuine windows and using a loader?
Can it be saved?

Thank you!


My System SpecsSystem Spec
.

14 Jul 2012   #2
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Can you boot to Safe Mode?

BOOT TO SAFE MODE
Ø Power down your computer.
Ø Power up your computer.
Ø IMMEDIATELY—Start tapping the SPACEBAR
Ø When the Windows Boot Manager screen appears,
Press the F8 key
Ø The Advanced Boot Options screen will appear.
Ø Using the down arrow key, highlight Safe Mode
Ø Press the ENTER key.

In shorthand,
PowerUp | Spacebar until Windows Boot Manager
| F8 | Safe Mode | ENTER
My System SpecsSystem Spec
14 Jul 2012   #3
Tharayman

Windows7 64bit ultimate SP1
 
 

The screen comes up no matter what mode I choose to boot
My System SpecsSystem Spec
.


14 Jul 2012   #4
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

When you follow the procedure I gave, and do not deviate in the smallest there from, precisely what happens?

Please, despite what may have happened previously, carry out the procedure precisely and tell me what happens.

I'm trying to save you from a 100% clean install.
My System SpecsSystem Spec
14 Jul 2012   #5
Tharayman

Windows7 64bit ultimate SP1
 
 

Actually tapping the spacebar just makes my computer restart. Every time^^ I just hold the F8 button to get to the advanced boot options. When I choose safe mode there I get to choose what OS to boot, wich is Windows(default) as it is the only OS on my computer. It then proceeds to the exact same screen shown in my first post.
My System SpecsSystem Spec
14 Jul 2012   #6
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

I realize that with a non-working computer the following can not be carried out perfectly, but please give this your best shot:

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
My System SpecsSystem Spec
14 Jul 2012   #7
Tharayman

Windows7 64bit ultimate SP1
 
 

I`m guessing all of the these programs needs to be run in a windows enviroment?
Luckily I know most of my hardware specs by heart. Will update in a second!
My System SpecsSystem Spec
14 Jul 2012   #8
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

manufacturer?
Model?
My System SpecsSystem Spec
14 Jul 2012   #9
Tharayman

Windows7 64bit ultimate SP1
 
 

Done. See anything usefull?
My System SpecsSystem Spec
14 Jul 2012   #10
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Manufacturer of computer?
Model of computer?
My System SpecsSystem Spec
Reply

 Win7 x64 will no longer boot properly after innstalling SP1




Thread Tools





Similar help and support threads
Thread Forum
How to properly remove Win7, in a dual boot config
Good afternoon. First off, I've been scouring Google for an answer to this (naturally including a couple tuts on this site), but most of those seem to involve a situation where 7 & 8 are installed on the same physical drive. My situation is this: Windows 7 was installed first. The System...
Installation & Setup
PC can no longer connect properly to the internet?
My GF told me her computer's firefox wasn't working, so I looked at it and found that Internet Explorer and a few other internet programs also weren't working. It doesn't return any sort of server not found error on the browsers, if I click a link it just seems to do absolutely nothing, it doesn't...
Network & Sharing
[BUG] moved Win7 partition - Win7 don't boot properly
Hello all, I come to you because I have a big problem : I had my HDD like that : - system reserved (primary) - Ubuntu (primary) - Win7 (primary) - Win8 (secondary) - DATA (secondary) (with all my users datas !!) I used >>Partion Wizard Home Edition<< to manage the partitions.
Installation & Setup
How do I properly dual boot a cloned/copy of my Win7 partition on SSD?
I have recently installed a new SSD drive and I am trying to clone my OS partition to it. I am having a separate issue of updating the firmware of the SSD (Plextor M3 128) but Windows 7 recognizes the drive is set up correctly (AHCI, Trim, Aligned). I then used Partition Wizard to copy my OS...
Installation & Setup
Windows no longer show my themes properly
I recently reinstalled windows 7 Ultimate 64bit and everything was going just fine untill today that i turned on the pc and saw that my theme didn't look right so i applied another theme and the same thing. here is a screenshot to better show what im saying: ImageShack&#174; - Online Photo and Video...
Themes and Styles
Desktop no longer will go to sleep properly..
i iddnt see the proper forum for this..mods are welcomed to move it..but for some reason my pc wont sleep properly...the monitors shut off the keyboard shut off but the pc itself still runs..i turned it off and turned it on my bios said press f2 to load defaults fro some reason..so i did..and then...
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App