Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HELP PLEASE: Updates failed

13 Sep 2012   #1

Windows 7, home edition 64bit
 
 
HELP PLEASE: Updates failed

Hello.

I hope you could help me here. Well there's been a problem with my Laptop for a month now. The updates were installed, but when system restarted the same problem occured. I read all your posts here, I tried but no use.
There are issues:
The Windows 7 Home Premium x64
---------------------------------------------------------------

1. The updates are installing (from 1-9 updates)
2. Configurating Windows updates (up to 15%)
3. The system is Shuting down - is restarting
4. Preparing to configure Windows - Do not turn off your computer
5. Configurating windows updates 15% complete
6. Faliure configurating windows updates - Reverting changes
7. Shuting down - restarting system again
8. after the system start up again it shows: Preparing to configure windows - Do not turn off computer

-------------------------------------------------------------------

These stages go on and on. When I check failed updates, there's a whole list of faliures.
There are some images below.

Please tell me what to do or should I just reinstall the entire Winows7.

Thank you for your help in advance.



Attached Thumbnails
HELP PLEASE: Updates failed-untitled.png   HELP PLEASE: Updates failed-untitled2.png   HELP PLEASE: Updates failed-untitled3.png  
My System SpecsSystem Spec
.

13 Sep 2012   #2

Windows 7, home edition 64bit
 
 

Oh, I forgot to send the shot of failed updates. The list is long...

So for short understanding... the shots ... first the computer shows to install updates and I confirm. Then, after the procedure (8.) it shows like all is ok, but then again shows The updates installation failed and then asks me again to update.

Thanx.


Attached Thumbnails
HELP PLEASE: Updates failed-capture.png  
My System SpecsSystem Spec
13 Sep 2012   #3

MS Windows 7 Home Premium 64-bit SP1
 
 

Try installing the updates one at a time. You'll notice the update that troubles you. I had this problem before since I also run Windows 7 Home Premium 64bit.
My System SpecsSystem Spec
.


13 Sep 2012   #4

Windows 7 Pro. 64/SP-1
 
 

Right click on one of the failed updates and view details. It should give you a code.
That code should help us help you.
My System SpecsSystem Spec
20 Sep 2012   #5

Windows 7, home edition 64bit
 
 

Hi.

The code that bothers my laptop is described in the picture.

I hope you will be able to help me find the solution.

Thank you.


Attached Images
 
My System SpecsSystem Spec
20 Sep 2012   #6

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem
 
 

hi Ninchie,


Try hitting "Check for updates" to refresh the list. If that doesn't work, hide that one update and try again.

I seem to recall this update was a problem and can be hidden so that it doesn't keep trying.

KB 2729094
You could also try a manual download from MS downloads here:
An update for the Segoe UI symbol font in Windows 7

My System SpecsSystem Spec
20 Sep 2012   #7

Windows 7, home edition 64bit
 
 

HI.

I will try now. I even tried by all what was mentioned in this forums. But no luck so far
My System SpecsSystem Spec
20 Sep 2012   #8

Windows 7, home edition 64bit
 
 

Quote   Quote: Originally Posted by Slartybart View Post
hi Ninchie,


Try hitting "Check for updates" to refresh the list. If that doesn't work, hide that one update and try again.

I seem to recall this update was a problem and can be hidden so that it doesn't keep trying.

KB 2729094
You could also try a manual download from MS downloads here:
An update for the Segoe UI symbol font in Windows 7

Well I tried. Ckeck my messages that I got ...


Attached Thumbnails
HELP PLEASE: Updates failed-capture4.jpg   HELP PLEASE: Updates failed-capture5.jpg  
My System SpecsSystem Spec
20 Sep 2012   #9

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem
 
 

Ok, thanks, we'll do this one at a time - there's only 9 right

KB 2647753: Description of an update rollup for the printing core components in Windows 7

I looked again and found something you might want to try: Navigate to
Control Panel\All Control Panel Items\Troubleshooting\System and Security
and select teh Windows Upte troubleshooter (at the bottom)
* Make sure that you are connected to the internet when you run it.

Looking around - you're not the only one experiencing this. some solutions point to anti-virus / firewall, others point to startup programs. We'll just have to work through it.

go ahead and run the trouble shooter. post the results
My System SpecsSystem Spec
20 Sep 2012   #10

Windows 7, home edition 64bit
 
 

OK, I am on it now.

Thanx
My System SpecsSystem Spec
Reply

 HELP PLEASE: Updates failed




Thread Tools



Similar help and support threads for2: HELP PLEASE: Updates failed
Thread Forum
Solved Failed to install updates... Windows Updates & Activation
2 recommended updates failed. Windows Updates & Activation
Many Updates Failed Windows Updates & Activation
Windows Updates Failed Windows Updates & Activation
failed updates Performance & Maintenance
Solved any ideas why these updates failed Windows Updates & Activation
Failed Updates Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:12 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33