Windows 7 SP1 install failure, error 80070002

Page 1 of 2 12 LastLast

  1. thegr8anand
    Posts : 36
    Windows 7 x64 Home Premium
       New #1

    Windows 7 SP1 install failure, error 80070002 800f0826


    Hi guys,

    I have had this problem ever since SP1 was available and never was able to install it. The idea of doing a clean install doesn't interest me so I have avoided SP1 till now. But now the new AMD catalyst drivers require SP1 and was wondering if this problem was ever solved.

    I remember when Windows 7 Service Pack 1 was released, there was a problem with registry cleaning and stuff like driver cleaners because of which couldn't install SP1. I tried a lot of solution like replacing missing files etc but didn't work then.

    So I tried now but am still not able to install it. During the update process on startup it stops around 10% and fails.

    I have run SFC /SCANNOW(no integrity violations) and the cbs log is attached.

    I ran the Update readiness tool and the checksur log is clean.

    I ran the MGADiag as well and have attached its output.

    Heres the old thread way back in April 2011.
    Trying to install Windows 7 Service Pack 1 SP1 error 80070002
    Last edited by thegr8anand; 18 Nov 2012 at 15:00.
      My Computer
    Quote Quote

  3. thegr8anand
    Posts : 36
    Windows 7 x64 Home Premium
    Thread Starter
       New #2

    Ok. I tried the standalone SP1 install package but it failed the same way and gave error 800f0826.

    "Windows Update error 800f0826 is displayed when an update for Windows has failed to install and is preventing you from installing additional updates. Error 800f0826 does not identify the update that has caused the problem. The update that has caused the problem will display a different error."

    I am guessing it will probably lead to the earlier error 80070002.

    I looked in to the CBS.log and have trimmed it to just show the complete log from start of installation till failure. Have zipped it since its quite huge text file. I just don't know what to look for.
      My Computer
    Quote Quote

  4. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #3

    Please post teh c:\windows\windowsupdate.log file - I can find no problems reported in your first set of files
      My Computer
    Quote Quote

  6. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #4

    It looks to me as if Windows cannot properly read the SP1 files - tehre are a lot of errors similar to...
    Code:
     Line 799: 2012-11-18 14:40:33, Info                  CBS    SPI: Self trust verification failed for C:\11fd8b4a671a6b5cc758\4e13cf1d8abeb98fd93d872a855642\spc.xml.  0x57
 Line 802: 2012-11-18 14:40:33, Info                  CBS    SPI: Self trust verification failed for C:\11fd8b4a671a6b5cc758\4e13cf1d8abeb98fd93d872a855642\SPWizUI.dll.  0x57
 Line 805: 2012-11-18 14:40:33, Info                  CBS    SPI: Self trust verification failed for C:\11fd8b4a671a6b5cc758\4e13cf1d8abeb98fd93d872a855642\SpError.dll.  0x57
    Did you check the hash for the download? did you verify the burn (if appropriate)?
      My Computer
    Quote Quote

  7. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #5

    Code:
    2012-11-18 15:52:54, Info                  CBS            INSTALL index: 103, phase: 2, result 6701, inf: usbport.inf
2012-11-18 15:52:55, Info                  CBS    DriverUpdateInstallUpdates failed [HRESULT = 0x80071a2d - ERROR_TRANSACTION_NOT_ACTIVE]
2012-11-18 15:52:55, Error                 CBS    Doqe: Failed installing driver updates [HRESULT = 0x80071a2d - ERROR_TRANSACTION_NOT_ACTIVE]
    appears to be the point where the install actually fails -
      My Computer
    Quote Quote

  8. thegr8anand
    Posts : 36
    Windows 7 x64 Home Premium
    Thread Starter
       New #6

    How do I find the correct hash or crc?

    Also I googled this page and on searching I did have some similar errors 'Error_Not_Found'
    Windows 7 Service Pack 1 – Installation Failure ERROR_ACCESS_DENIED (0×80070005) | Mark Parris

    The cbs log has some of those as well. Could that be the problem?

    Code:
    2012-11-18 15:50:44, Info                  CBS    Perf: Doqe: Uninstall started.
2012-11-18 15:50:44, Info                  CBS    Doqe: [Forward] Uninstalling driver updates, Count 52
2012-11-18 15:50:44, Info                  CBS    DriverUpdateUninstallUpdates failed [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:50:44, Error                 CBS    Doqe: Failed uninstalling driver updates [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:50:44, Info                  CBS    Perf: Doqe: Uninstall ended.
2012-11-18 15:50:44, Info                  CBS    Failed uninstalling driver updates [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:50:44, Error                 CBS    Shtd: Failed while processing non-critical driver operations queue. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:50:44, Info                  CBS    Shtd: Rolling back KTM, because drivers failed.
2012-11-18 15:50:45, Info                  CBS    Progress: UI message updated. Operation type: Service Pack. Stage: 1 out of 1. Temporary Rollback.
2012-11-18 15:50:45, Info                  CBS    Progress: UI message updated. Operation type: Service Pack. Stage: 1 out of 1. Temporary Rollback.
2012-11-18 15:50:45, Info                  CBS    SQM: Waiting up to 60000 ticks for pending uploads to complete.
2012-11-18 15:50:45, Info                  CBS    Shtd: progress thread terminating. [HRESULT = 0x00000000 - S_OK]
2012-11-18 15:50:45, Info                  CBS    Shtd: progress thread terminated normally
2012-11-18 15:50:45, Info                  CBS    Doqe: Unlocking driver updates, Count 109
2012-11-18 15:50:45, Info                  CBS    Shtd: Shutdown processing complete.
2012-11-18 15:50:45, Info                  CBS    Restored system sleep block state: 0x80000000
2012-11-18 15:50:45, Info                  CBS    Ending the TrustedInstaller main loop.
2012-11-18 15:50:45, Info                  CBS    Starting TrustedInstaller finalization.
2012-11-18 15:50:45, Info                  CBS    Failed to unload the COMPONENTS hive. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-11-18 15:50:45, Info                  CBS    Ending TrustedInstaller finalization.
    Code:
    2012-11-18 15:53:42, Error                 CBS    Doqe: Marked package Package_1_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1 as failed. [HRESULT = 0x00000000 - S_OK]
2012-11-18 15:53:42, Info                  CBS    Clearing HangDetect value
2012-11-18 15:53:42, Info                  CBS    Saved last global progress. Current: 1, Limit: 1, ExecuteState: CbsExecuteStateFailed
2012-11-18 15:53:42, Info                  CBS    Doqe: Unlocking driver updates, Count 109
2012-11-18 15:53:42, Info                  CBS    WER: Generating failure report for package: Package_1_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1, status: 0x80071a2d, failure source: DOQ, start state: Staged, target state: Installed, client id: SP Coordinater Engine
2012-11-18 15:53:42, Info                  CBS    Failed to query DisableWerReporting flag.  Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:53:50, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing.  Continuing without it...
2012-11-18 15:53:50, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing.  Continuing without it...
2012-11-18 15:54:16, Info                  CBS    Failed to parse CSI error string. [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:16, Info                  CBS    Failed to get AI/GC error details from raw error details. [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:16, Info                  CBS    Did not send SQM reports for pending package: Package_1_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:16, Info                  CBS    Startup: Package: Package_1_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1 completed startup processing, new state: Staged, original: Staged, targeted: Installed.  hr = 0x80071a2d
2012-11-18 15:54:16, Info                  CBS    WER: Generating failure report for package: Package_for_KB2529073_RTM~31bf3856ad364e35~amd64~~6.1.1.1, status: 0x80071a2d, failure source: DOQ, start state: Installed, target state: Installed, client id: SP Coordinater Engine
2012-11-18 15:54:16, Info                  CBS    Failed to query DisableWerReporting flag.  Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:54:16, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing.  Continuing without it...
2012-11-18 15:54:16, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing.  Continuing without it...
2012-11-18 15:54:17, Info                  CBS    Failed to parse CSI error string. [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:17, Info                  CBS    Failed to get AI/GC error details from raw error details. [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:17, Info                  CBS    Did not send SQM reports for pending package: Package_for_KB2529073_RTM~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:17, Info                  CBS    Startup: Package: Package_for_KB2529073_RTM~31bf3856ad364e35~amd64~~6.1.1.1 completed startup processing, new state: Installed, original: Installed, targeted: Installed.  hr = 0x80071a2d
2012-11-18 15:54:17, Info                  CBS    WER: Generating failure report for package: Package_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1, status: 0x80071a2d, failure source: DOQ, start state: Installed, target state: Installed, client id: SP Coordinater Engine
2012-11-18 15:54:17, Info                  CBS    Failed to query DisableWerReporting flag.  Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2012-11-18 15:54:17, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing.  Continuing without it...
2012-11-18 15:54:17, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing.  Continuing without it...
2012-11-18 15:54:17, Info                  CBS    Failed to parse CSI error string. [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:17, Info                  CBS    Failed to get AI/GC error details from raw error details. [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:17, Info                  CBS    Did not send SQM reports for pending package: Package_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070057 - E_INVALIDARG]
2012-11-18 15:54:17, Info                  CBS    Startup: Package: Package_for_KB2529073~31bf3856ad364e35~amd64~~6.1.1.1 completed startup processing, new state: Installed, original: Installed, targeted: Installed.  hr = 0x80071a2d
      My Computer
    Quote Quote

  10. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #7

    The CBS always contains a number of apparent errors - which in fact aren't errors at all - mostly, if the column next to the date/time doesn't state 'Error' you can ignore them.
    ( so in your posted clips, there's only three notable errors - the first two of which is simply becuase it didn't find any driver updates, and was therefore worked through)

    Please post the windowsupdate.log
      My Computer
    Quote Quote

  11. thegr8anand
    Posts : 36
    Windows 7 x64 Home Premium
    Thread Starter
       New #8

    Here you go.

    Also how do i verify the hash of the sp1 package?
      My Computer
    Quote Quote

  12. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #9

    I think You receive a "0x80070002" or "0x80070003" error code after you download an update from Windows Update, from Microsoft Update, or from Windows Server Update Services still applies here - please use the fixit (and reboot) after downloading a fresh standalone SP1 from Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center
    You'll want windows6.1-KB976932-X64.exe

    Once youv'e rebooted after running the fixit, boot to a Clean Boot and run the standalone....
    How to perform a clean boot to troubleshoot a problem in Windows Vista or Windows 7
      My Computer
    Quote Quote

  13. tom982
    Posts : 2,663
    Windows 8.1 Pro x64
       New #10

    thegr8anand said:
    Here you go.

    Also how do i verify the hash of the sp1 package?
    I would recommend ComputeHASH:

    Download ComputeHASH Utility 1.1 Free - A lightweight application to calculate and compare file checksums. - Softpedia
      My Computer
    Quote Quote

 
Page 1 of 2 12 LastLast

  Related Discussions
Windows Genuine Failure 80070002
in Windows Updates & Activation

Hello i reinstalled my win7 and tried to activate but slui.exe just gives Error xC0000022 https://puu.sh/xNtYf/8dc9b25238.png <<german reading {Access Denied} tried to follow the instruction but that aint even working when i use the tool i get this after pressing "Copy" ...
I can not for the life of me get SP1 to install. It always gives me the 80070002 error. I've done what the microsoft help says to do which is clear out my updates list after stopping windows update in services then starting them again but it just produces the same error code. I've run the...
Windows Update Failure, Error Code 80070002
in Windows Updates & Activation

I've exhausted my ability to try to solve this one on my own. I've run all of the automated fixes I can find from Microsoft, so I'm asking for some more targeted help. I'm running Windows 7 Pro x64 SP1. I have run the System Update Readiness Tool (May '14). It completes successfully, but I...
Hello. I created an account just to enquire about this problem. It's been bugging me for the past few days and spoiling my Christmas mood :p Software problems forced a repair installation to my computer, and I've been unable to reinstall SP1 since. Ended up doing a clean install. Now SP1 remains...
I am trying to install SP1 and am not able to either from Windows Update or the complete x64 package. I get the error File_Not_Found(0x80070002). I get this error after the computer restarts and the service pack fails to configure (around 10%). I have 7 Home Premium x64. This happens after...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 17:06.
Find Us