Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Update Error Code 8008370B

14 Mar 2013   #41
tom982

Microsoft Community Contributor Award Recipient

Windows 8.1 Pro x64
 
 

Hi NLK,

Oops! Sorry for missing that part out.

Yes, reboot and run the SURT please.

Tom


My System SpecsSystem Spec
.
15 Mar 2013   #42
nolimitkemet

Windows 7 Ultimate x64 SP1
 
 
CBS-11 Attached

Quote   Quote: Originally Posted by tom982 View Post
Hi NLK,

Oops! Sorry for missing that part out.

Yes, reboot and run the SURT please.

Tom
Hello Tom,

No worries. I figured that was the case, but wanted to make sure there were no additional measures to be taken before I did that. In any event, I have rebooted, run SURT, and attached the resultant CBS zip folder that has the following summary:

Summary:
Seconds executed: 473
Found 6 errors
CSI Manifest Missing Total count: 1
CSI Missing Winning Component Key Total count: 5

Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-v..ualpc-vmm.resources_31bf3856ad364e35_7.1.7600.16393_sv-se_3fee309205435163.manifest

The missing payload issues were corrected thanks to your effective measures.

Standing by for your next reply.

Many Thanks,

NLK
My System SpecsSystem Spec
15 Mar 2013   #43
tom982

Microsoft Community Contributor Award Recipient

Windows 8.1 Pro x64
 
 

Hi NLK

I have finally managed to find the manifest that you are missing so I would like to go ahead and fix that:

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Please download the attached file, Packs.zip and save this to your Desktop.
  2. Right-click on the file and select Extract All...
  3. Tick the box labelled Show extracted files when complete then click Extract
  4. A window will open showing two folders, Manifests and Packages
  5. Open the Manifests folder and copy the files into the following folder (if there are any files)

    C:\Windows\Temp\CheckSur\Winsxs\Manifests

  6. Open the Packages folder and copy the files into the following folder (if there are any files)

    C:\Windows\Temp\CheckSur\Servicing\Packages

  7. Run the System Update Readiness Tool (SURT) again
  8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:

    C:\Windows\Logs\CBS\CheckSUR.persist.log


Tom
My System SpecsSystem Spec
.

15 Mar 2013   #44
nolimitkemet

Windows 7 Ultimate x64 SP1
 
 
CBS-12 Attached

Quote   Quote: Originally Posted by tom982 View Post
Hi NLK

I have finally managed to find the manifest that you are missing so I would like to go ahead and fix that:

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Please download the attached file, Packs.zip and save this to your Desktop.
  2. Right-click on the file and select Extract All...
  3. Tick the box labelled Show extracted files when complete then click Extract
  4. A window will open showing two folders, Manifests and Packages
  5. Open the Manifests folder and copy the files into the following folder (if there are any files)

    C:\Windows\Temp\CheckSur\Winsxs\Manifests
  6. Open the Packages folder and copy the files into the following folder (if there are any files)

    C:\Windows\Temp\CheckSur\Servicing\Packages
  7. Run the System Update Readiness Tool (SURT) again
  8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:

    C:\Windows\Logs\CBS\CheckSUR.persist.log


Tom
Hello Tom,

I followed your instructions and pasted the file from the Manifests folder into C:\Windows\Temp\CheckSur\Winsxs\Manifests

FYI: The Packages folder was empty

I attached the resultant CBS zip as the C:\Windows\Logs\CBS\CheckSUR.persist.log contained more than the maximum allowable characters allowed in a post.

I believe this is the part that is of interest however:

Code:
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-03-15 21:47

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f)    CSI Manifest Missing    0x00000002    amd64_microsoft-windows-v..ualpc-vmm.resources_31bf3856ad364e35_7.1.7600.16393_sv-se_3fee309205435163.manifest    amd64_microsoft-windows-v..ualpc-vmm.resources_31bf3856ad364e35_7.1.7600.16393_sv-se_3fee309205435163    
(fix)    CSI Manifest Missing    CSI File Replaced    File: amd64_microsoft-windows-v..ualpc-vmm.resources_31bf3856ad364e35_7.1.7600.16393_sv-se_3fee309205435163.manifest From: C:\Windows\CheckSur\v1.0\windows6.1-7601-x64-clientcab4.cab
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft-windows-ie-ieproxy_31bf3856ad364e35_8.0.7600.16700_none_ab11074022a9c0b4        
(f)    CSI Missing Winning Component Key    0x00000000    amd64_microsoft-windows-ie-htmlactivexcompat_31bf3856ad364e35_8.0.7600.16700_none_8e702baba03ff7f3        
(f)    CSI Missing Winning Component Key    0x00000000    amd64_microsoft-windows-taskscheduler-client_31bf3856ad364e35_6.1.7600.16699_none_9fe870a9b80560f9        
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft-windows-ie-htmlactivexcompat_31bf3856ad364e35_8.0.7600.16700_none_32519027e7e286bd        
(f)    CSI Missing Winning Component Key    0x00000000    amd64_microsoft-windows-ie-ieproxy_31bf3856ad364e35_8.0.7600.16700_none_072fa2c3db0731ea        

Summary:
Seconds executed: 267
 Found 6 errors
 Fixed 1 errors
  CSI Manifest Missing Total count: 1
  Fixed: CSI Manifest Missing.  Total count: 1
  CSI Missing Winning Component Key Total count: 5
Thanks as always for your time and expertise. Standing by.

Regards,

NLK
My System SpecsSystem Spec
19 Mar 2013   #45
tom982

Microsoft Community Contributor Award Recipient

Windows 8.1 Pro x64
 
 

Hi NLK,

I completely destroyed the registry in my virtual machine to try and replicate that error in the hope that I could retrace my footsteps to fix it, but I didn't have any luck. Let's try another approach:

Command Prompt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    regedit /e
    %SYSTEMDRIVE%\tom982.reg "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide"

  4. This will create a text file called tom982.reg in the root folder of your main drive (e.g. C:\tom982.txt). Please attach this to your next post.

If the export is too big, please upload it to Free large file hosting. Send big files the easy way! and send me the link please.

Tom
My System SpecsSystem Spec
19 Mar 2013   #46
nolimitkemet

Windows 7 Ultimate x64 SP1
 
 
tom982.reg link on Sendspace.com

Quote   Quote: Originally Posted by tom982 View Post
Hi NLK,

I completely destroyed the registry in my virtual machine to try and replicate that error in the hope that I could retrace my footsteps to fix it, but I didn't have any luck. Let's try another approach:

Command Prompt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    regedit /e
    %SYSTEMDRIVE%\tom982.reg "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide"

  4. This will create a text file called tom982.reg in the root folder of your main drive (e.g. C:\tom982.txt). Please attach this to your next post.

If the export is too big, please upload it to Free large file hosting. Send big files the easy way! and send me the link please.

Tom
Hello Tom,

Again, I have to Thank You for all of the trouble you're going through to solve my issues. Greatly appreciated.

As you suspected, the reg file was far too large to attach. Per your instructions, the download link is as follows: http://www.sendspace.com/file/oolsbe

Best Regards,

NLK
My System SpecsSystem Spec
20 Mar 2013   #47
tom982

Microsoft Community Contributor Award Recipient

Windows 8.1 Pro x64
 
 

Hi NLK,

Thanks for uploading the file, it was quite a big one! I think I'm finally onto something with this

Registry Backup

Please download RegBak (by AceLogix Software) from the link below and save it to your Desktop.
Download Mirror #1
  • Right-click > Extract all... and extract the files to your Desktop
    For 32-bit (x86) editions of Windows, double-click on regbak.exe
    For 64-bit (x64) editions of Windows, double-click on regbak64.exe
    If you are unsure whether you have x86 or x64 Windows, see here
  • Without changing any options, click Next. RegBak will now backup all of your registry hives.



Modify Registry Permissions

  1. Click on the Start button and in the search box, type regedit
  2. When you see regedit on the list, right-click on it and select Run as administrator.
  3. In the left hand panel of regedit, you will see a list of registry keys. Navigate to the following key, right-click on it and select Permissions...:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing
  4. Click Advanced.
  5. Under the Owner tab, click Edit.
  6. Click "Other Users and Groups".
  7. Click Advanced.
  8. Click "Find Now".
  9. Scroll down and double click on Everyone.
  10. Click OK.
  11. Put the check in "Replace owner on subcontainers and objects", click Apply then change to the Permissions tab.
  12. Under type Deny, single click on any entries and click Remove. (N.B.: There may not be any Deny entries, in which case just ignore this step. Just remove any that do exist)
  13. Click Edit (now on the standard file Property window under the Security tab).
  14. Click Add.
  15. Click Advanced.
  16. Click "Find Now".
  17. Scroll down and double click on Everyone.
  18. Click OK.
  19. Single click on Everyone and then tick the "Full Control" box under Allow.
  20. Click OK TWO times.

Registry Modifications

  1. Go to Start > Run to bring up the run box
  2. In the box, type notepad.exe and press OK to open Notepad
  3. Copy (Ctrl+C) all of the text in the following box and paste (Ctrl+V) it into Notepad

    Code:
    Windows Registry Editor Version 5.00
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-ie-ieproxy_31bf3856ad364e35_none_17d61f57f21ea8ad\8.0]
    "8.0.7600.16385"=-
    "8.0.7600.16671"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-ie-htmlactivexcompat_31bf3856ad364e35_none_9f44a6c1b10403e2\8.0]
    "8.0.7600.16385"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-taskscheduler-client_31bf3856ad364e35_none_44a084fc2f66d950\6.1]
    "6.1.7600.16385"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-ie-htmlactivexcompat_31bf3856ad364e35_none_43260b3df8a692ac\8.0]
    "8.0.7600.16385"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-ie-ieproxy_31bf3856ad364e35_none_73f4badbaa7c19e3\8.0]
    "8.0.7600.16385"=-
    "8.0.7600.16671"=-
  4. Go to File > Save As... and save it to your Desktop named Fix.reg. Make sure you change the Save as type to All Files (*.*)
  5. Locate Fix.reg on your Desktop and double-click on it to merge it with your registry
  6. Answer Yes when prompted about merging with the registry



  1. Finally:
  2. Navigate to the following key, right-click on it and select Permissions...:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing
  3. Click Advanced.
  4. Click on the Permissions tab (should be the default tab).
  5. Select and click Remove on the ALLOW: Everyone entry you just added.
  6. Click OK.
  7. Go to Owner tab.
  8. Click Edit.
  9. Click "Other Users and Groups".
  10. Paste in "NT Service\TrustedInstaller"
  11. Click OK.
  12. Put the check in "Replace owner on subcontainers and objects".
  13. Click Yes on any message boxes which pop-up.
  14. Click Continue on any Access is Denied messages.
  15. Click OK out of the final message box.
  16. Click OK out of everything.

Tom
My System SpecsSystem Spec
20 Mar 2013   #48
nolimitkemet

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by tom982 View Post
Hi NLK,

Thanks for uploading the file, it was quite a big one! I think I'm finally onto something with this

Registry Backup

Please download RegBak (by AceLogix Software) from the link below and save it to your Desktop.
Download Mirror #1
  • Right-click > Extract all... and extract the files to your Desktop
    For 32-bit (x86) editions of Windows, double-click on regbak.exe
    For 64-bit (x64) editions of Windows, double-click on regbak64.exe
    If you are unsure whether you have x86 or x64 Windows, see here
  • Without changing any options, click Next. RegBak will now backup all of your registry hives.



Modify Registry Permissions

  1. Click on the Start button and in the search box, type regedit
  2. When you see regedit on the list, right-click on it and select Run as administrator.
  3. In the left hand panel of regedit, you will see a list of registry keys. Navigate to the following key, right-click on it and select Permissions...:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing
  4. Click Advanced.
  5. Under the Owner tab, click Edit.
  6. Click "Other Users and Groups".
  7. Click Advanced.
  8. Click "Find Now".
  9. Scroll down and double click on Everyone.
  10. Click OK.
  11. Put the check in "Replace owner on subcontainers and objects", click Apply then change to the Permissions tab.
  12. Under type Deny, single click on any entries and click Remove. (N.B.: There may not be any Deny entries, in which case just ignore this step. Just remove any that do exist)
  13. Click Edit (now on the standard file Property window under the Security tab).
  14. Click Add.
  15. Click Advanced.
  16. Click "Find Now".
  17. Scroll down and double click on Everyone.
  18. Click OK.
  19. Single click on Everyone and then tick the "Full Control" box under Allow.
  20. Click OK TWO times.

Registry Modifications

  1. Go to Start > Run to bring up the run box
  2. In the box, type notepad.exe and press OK to open Notepad
  3. Copy (Ctrl+C) all of the text in the following box and paste (Ctrl+V) it into Notepad

    Code:
    Windows Registry Editor Version 5.00
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-ie-ieproxy_31bf3856ad364e35_none_17d61f57f21ea8ad\8.0]
    "8.0.7600.16385"=-
    "8.0.7600.16671"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-ie-htmlactivexcompat_31bf3856ad364e35_none_9f44a6c1b10403e2\8.0]
    "8.0.7600.16385"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-taskscheduler-client_31bf3856ad364e35_none_44a084fc2f66d950\6.1]
    "6.1.7600.16385"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-ie-htmlactivexcompat_31bf3856ad364e35_none_43260b3df8a692ac\8.0]
    "8.0.7600.16385"=-
    
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-ie-ieproxy_31bf3856ad364e35_none_73f4badbaa7c19e3\8.0]
    "8.0.7600.16385"=-
    "8.0.7600.16671"=-
  4. Go to File > Save As... and save it to your Desktop named Fix.reg. Make sure you change the Save as type to All Files (*.*)
  5. Locate Fix.reg on your Desktop and double-click on it to merge it with your registry
  6. Answer Yes when prompted about merging with the registry



  1. Finally:
  2. Navigate to the following key, right-click on it and select Permissions...:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing
  3. Click Advanced.
  4. Click on the Permissions tab (should be the default tab).
  5. Select and click Remove on the ALLOW: Everyone entry you just added.
  6. Click OK.
  7. Go to Owner tab.
  8. Click Edit.
  9. Click "Other Users and Groups".
  10. Paste in "NT Service\TrustedInstaller"
  11. Click OK.
  12. Put the check in "Replace owner on subcontainers and objects".
  13. Click Yes on any message boxes which pop-up.
  14. Click Continue on any Access is Denied messages.
  15. Click OK out of the final message box.
  16. Click OK out of everything.

Tom
Hello Tom,

I will perform the steps as you have instructed in a few hours when I get home.

I presume that upon completion, I should restart my computer, run SURT, and attach the resultant CBS zip as in previous instructions. Thanks as always.

Best Regards,

NLK
My System SpecsSystem Spec
20 Mar 2013   #49
tom982

Microsoft Community Contributor Award Recipient

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by nolimitkemet View Post
Hello Tom,

I will perform the steps as you have instructed in a few hours when I get home.

I presume that upon completion, I should restart my computer, run SURT, and attach the resultant CBS zip as in previous instructions. Thanks as always.

Best Regards,

NLK
Hi NLK,

Why is it that I always forget the easy stuff? I spent a few hours trying to get my head around this then slip up right at the last hurdle haha. Yes please, the usual drill Sorry for forgetting it (again!).

Tom
My System SpecsSystem Spec
20 Mar 2013   #50
nolimitkemet

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by tom982 View Post
Quote   Quote: Originally Posted by nolimitkemet View Post
Hello Tom,

I will perform the steps as you have instructed in a few hours when I get home.

I presume that upon completion, I should restart my computer, run SURT, and attach the resultant CBS zip as in previous instructions. Thanks as always.

Best Regards,

NLK
Hi NLK,

Why is it that I always forget the easy stuff? I spent a few hours trying to get my head around this then slip up right at the last hurdle haha. Yes please, the usual drill Sorry for forgetting it (again!).

Tom
Tom,

Never a problem. I have noticed how very many people you help not only on this site, but others as well. You are a rare breed indeed. Thanks for that. Take good care in the interim.

Cheers,

NLK
My System SpecsSystem Spec
Reply

 Windows Update Error Code 8008370B




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update fails in Update Check. Error code C80003FA.
Hello, I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates. I've tried several fixes including: - Waiting 15 minutes and running Windows Update again. - Letting Windows Update run on its own schedule. - SFC /Scannow -...
Windows Updates & Activation
windows update error (code 9c48 and code 9c57)
i having problem with this windows update here is zip for CBS thanks!!!
Windows Updates & Activation
Update for Windows Update Error Code 800700B7
Been using Google and such for a couple months messing with it but cant get update to work. My girlfriend updated from Vista a while ago and I cant crack this! I have done all the differect things I could find from Microsoft to no avail. The fixit program finds something and says its fixed but...
Windows Updates & Activation
windows update error code
hi i have got a windows 7 32 bit pc that had a virus on a few months ago managed to get rid of the virus but now i am getting error codes 800b0100 the updates are security updates i have check the log that i have uploaded here and there are 30 corrupt files on my system and i have no idea how to...
Windows Updates & Activation
Windows update error CODE 52F
any way to fix this without reinstalling windows 7
Windows Updates & Activation
Windows Update: Error Code 800B0100
Hello, I have been unable to download/install any updates for Windows 7 (gives Error Code 800B0100) via Windows update and had to install them through the web manually. I have installed the System Update Readiness Tool but it does not seem to solve the problem. Currently, I have KB982670, KB982664,...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App