Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Tried many things, still error 800736B3

15 May 2013   #41
Drip50291

Windows 7 Home Premium 64bit
 
 

There was a success in the elevated cmd but when merging the reg entries it gives the warning, I click yes, and that message about not being able to access the reg comes up. The second command comes up and says ERROR: The parameter is incorrect.


My System SpecsSystem Spec
.

15 May 2013   #42
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

Ouch.
That means that there is a problem with the permissions on the Keys.

Please run the REG LOAD command again, then ....

Please open Regedit

Navigate to the
HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components
key
right-click on the COMPONENTS key and select Permissions.
Click on the Advanced button,

There should be 4 entries
Users - Read - MACHINE\COMPONENTS - This key and subkeys
Administrators - Full Control - MACHINE\COMPONENTS - This key and subkeys
CREATOR OWNER - Special - MACHINE\COMPONENTS - Subkeys only
SYSTEM - FULL CONTROL - MACHINE\COMPONENTS - This key and subkeys

If they are all correct, put a tick in the 'Replace all child object....' box, and click Apply - wait for it to complete, and click OK

If they are not correct, post back with details, for instructions on how to modify them - do NOT attempt to do it yourself unless you are confident that you know how!.
My System SpecsSystem Spec
15 May 2013   #43
Drip50291

Windows 7 Home Premium 64bit
 
 

Oh no! lol I got to the Components folder navigating through the reg and I cant get in!
My System SpecsSystem Spec
.


15 May 2013   #44
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

That possibly figures.

please attempt the following...


Please run the REG LOAD command again, then ....

Please open Regedit

Navigate to the
HKEY_LOCAL_MACHINE\COMPONENTS
key
right-click on the COMPONENTS key and select Permissions.
Click on the Advanced button,

There should be 4 entries
Users - Read - <not inherited> - This key and subkeys
Administrators - Full Control - <not inherited>- This key and subkeys
CREATOR OWNER - Special - <not inherited> - Subkeys only
SYSTEM - FULL CONTROL - <not inherited> - This key and subkeys

If they are all correct, put a tick in the 'Replace all child object....' box, and click Apply - wait for it to complete, and click OK
My System SpecsSystem Spec
15 May 2013   #45
Drip50291

Windows 7 Home Premium 64bit
 
 

Once I seleted Advance theres no entries. I'm guessing its not supposed to look like this..
My System SpecsSystem Spec
15 May 2013   #46
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

First let's check that there's nothing simple wrong.
Please open an Elevated COmman Prompt window, and run the following command...

ICACLS C:\Windows\System32\config\COMPONENTS

close the window

open Regedit

Navigate to the
HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components
key
right-click on the COMPONENTS key and select Permissions.
Click on the Advanced button,
Then the Owner tab.
Who is listed as Owner??

Does 'Adminstrators (Blah\Blah)' appear in the 'Change owner to' box?
My System SpecsSystem Spec
17 May 2013   #47
Drip50291

Windows 7 Home Premium 64bit
 
 

Ran that command and still cant see anything listed under Permissions. Heres the message I get when I click on Permissions for the COMPONENT folder in the reg: After this message I get an Access Denied message.
My System SpecsSystem Spec
20 May 2013   #48
Drip50291

Windows 7 Home Premium 64bit
 
 

Is there a way to transfere a registry from a working windows machine and replace the one I have here?
My System SpecsSystem Spec
20 May 2013   #49
Drip50291

Windows 7 Home Premium 64bit
 
 

Ok, I got the permissions figured out. Just changed the owner and I'm not get access denied. I merged the test2kmy entry successfully but the next command:REG UNLOAD HKLM\COMPONENTS is getting an access denied now.
My System SpecsSystem Spec
20 May 2013   #50
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

I haven't forgotten you - but I have severely limited access to the internet at present.

Well doe for solving the permissions problem.
It's not unusual for the hive to refuse to unload - just leave the machine alone for 10 minutes, and then reboot.
This should allow it time to do any house-cleaning it needs to do, before forcing the unload. If it needs to do any more, it will do so after the reboot, and unload itself.
My System SpecsSystem Spec
Reply

 Tried many things, still error 800736B3




Thread Tools





Similar help and support threads
Thread Forum
error code 80073AA2 and 800736B3
error installing updates KB2998812 , KB2977759 and KB976932 reverting changes attaching CBS Logs collection
Windows Updates & Activation
Error 800736B3 when updating KB3000869 to my Win 7
Hello! I have tried several days to run the KB3000869 update to my Win 7 laptop without success. It always fails and the error code is every time 800736B3. I have run ccleaner, sfc /scannow, SURT and several other tools but none of them has helped. My CBS logs can be found here:...
Windows Updates & Activation
error 800736B3 on 4 updates
hello i'm stuck with these 4 updates. i've tried fixit, the big 500mo windows update correction program, manual installation etc nothing works i also have huge log files in my cbs folder (almost 5Go) . the cbs.log is almost 1Go here are the updates : kb2977629 kb2972211 kb2973112...
Windows Updates & Activation
How to fix the error codes 80072EFE and 800736B3
Can anyone help me with these errors? I have had this error for about a day and have found know help on Google so please if you can help in anyway, thanks in advance!
Windows Updates & Activation
error code 800736B3 installing SP1
Im getting this error code 800736B3. Can anyone help me.
Windows Updates & Activation
Error Code 800736B3 on SP1 Update
I have lurked in this forum in the past - always finding answers. Thanks to all the experts contributing to this forum. This time I joined so I could post, as I have been unable to find a solution to my problem. I can install all updates except for SP1. I keep getting error 800736B3. I...
Windows Updates & Activation

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App