New
#21
OK - let's have a look at the SPLDR settings....
Please run the following commands, and post the results.
REG QUERY HKLM\SYSTEM\CurrentControlSet\services\spldr /S
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SPLDR /S
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\Legacy_SLSVC
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\Legacy_SPPSVC
They may show something
Here are some instructions to make life easier :)
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.