Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IE10 Update Fail on Win 7 Pro x64 - error code 9C59

26 Aug 2013   #11
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - d0cac.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\d0cac
hit the enter key - if you get a 'Not Found' error try
DIR D:\d0cac
or
DIR E:\d0cac


The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\d0cac <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your response






My System SpecsSystem Spec
.
26 Aug 2013   #12
dxc0chappie

Windows 7 Professional x64
 
 

Hi, files extracted and xcopied, new CBS.log file attached.
Thx
My System SpecsSystem Spec
26 Aug 2013   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

So far, so good - here's the list of outstanding errors...

Code:
 Line 12742: 2013-08-26 22:16:53, Info                  CSI    00000345 [SR] Repairing 6 components
 Line 12743: 2013-08-26 22:16:53, Info                  CSI    00000346 [SR] Beginning Verify and Repair transaction
 Line 12746: 2013-08-26 22:16:53, Info                  CSI    00000348 [SR] Cannot repair member file [l:24{12}]"igdumd32.dll" of igdlh.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12750: 2013-08-26 22:16:53, Info                  CSI    0000034a [SR] Cannot repair member file [l:24{12}]"MFC90RUS.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12754: 2013-08-26 22:16:53, Info                  CSI    0000034c [SR] Cannot repair member file [l:32{16}]"comctl32.dll.mui" of Microsoft.Windows.Common-Controls.Resources, Version = 6.0.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"he-IL", VersionScope neutral, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12757: 2013-08-26 22:16:53, Info                  CSI    0000034e [SR] Cannot repair member file [l:26{13}]"vmsal.exe.mui" of Microsoft-Windows-VirtualPC-VMSAL.Resources, Version = 7.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture = [l:10{5}]"el-GR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12758: 2013-08-26 22:16:53, Info                  CSI    0000034f [SR] Cannot repair member file [l:18{9}]"vcomp.dll" of Microsoft.VC80.OpenMP, Version = 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, file is missing
 Line 12762: 2013-08-26 22:16:53, Info                  CSI    00000351 [SR] Cannot repair member file [l:24{12}]"MFC90KOR.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
A couple of those are a trifle difficult to source - I'll have to do them tomorrow.
Back then.
My System SpecsSystem Spec
.

28 Aug 2013   #14
dxc0chappie

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by NoelDP View Post
So far, so good - here's the list of outstanding errors...

Code:
 Line 12742: 2013-08-26 22:16:53, Info                  CSI    00000345 [SR] Repairing 6 components
 Line 12743: 2013-08-26 22:16:53, Info                  CSI    00000346 [SR] Beginning Verify and Repair transaction
 Line 12746: 2013-08-26 22:16:53, Info                  CSI    00000348 [SR] Cannot repair member file [l:24{12}]"igdumd32.dll" of igdlh.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12750: 2013-08-26 22:16:53, Info                  CSI    0000034a [SR] Cannot repair member file [l:24{12}]"MFC90RUS.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12754: 2013-08-26 22:16:53, Info                  CSI    0000034c [SR] Cannot repair member file [l:32{16}]"comctl32.dll.mui" of Microsoft.Windows.Common-Controls.Resources, Version = 6.0.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"he-IL", VersionScope neutral, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12757: 2013-08-26 22:16:53, Info                  CSI    0000034e [SR] Cannot repair member file [l:26{13}]"vmsal.exe.mui" of Microsoft-Windows-VirtualPC-VMSAL.Resources, Version = 7.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture = [l:10{5}]"el-GR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12758: 2013-08-26 22:16:53, Info                  CSI    0000034f [SR] Cannot repair member file [l:18{9}]"vcomp.dll" of Microsoft.VC80.OpenMP, Version = 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, file is missing
 Line 12762: 2013-08-26 22:16:53, Info                  CSI    00000351 [SR] Cannot repair member file [l:24{12}]"MFC90KOR.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
A couple of those are a trifle difficult to source - I'll have to do them tomorrow.
Back then.
Hi Noel - any luck with sourcing these files?
Thx.
My System SpecsSystem Spec
28 Aug 2013   #15
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Some - still trying to get hold of a couple...
My System SpecsSystem Spec
28 Aug 2013   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I can't find the proper Visual C++ 2008 file versions anywhere safe
It may simply be a case of installing the later SP1 version, which hopefully will scavenge the older file versions and registry entries...
You can download it from here...
Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) from Official Microsoft Download Center

First attempt installing it in normal mode - if that fails, then use a clean boot procedure, and attempt it there....
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
My System SpecsSystem Spec
28 Aug 2013   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

My System SpecsSystem Spec
28 Aug 2013   #18
dxc0chappie

Windows 7 Professional x64
 
 

Hi - wasn't sure if the installation of Visual C++ 2008 SP1 x64 worked or not, so I rebooted to clean boot, uninstalled SP1, then installed it ok.

Rebooted, ran SFC /SCANNOW and CBS.log attched.

Thx.
My System SpecsSystem Spec
28 Aug 2013   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

It's still there
OK - let's proceed with the rest, and I'll keep looking.

I've uploaded a file - d0cad.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\d0cad
hit the enter key - if you get a 'Not Found' error try
DIR D:\d0cad
or
DIR E:\d0cad


The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\d0cad <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your response
My System SpecsSystem Spec
28 Aug 2013   #20
dxc0chappie

Windows 7 Professional x64
 
 

Ok, d0cad copied, latest CBS.log attached.
Thx
My System SpecsSystem Spec
Reply

 IE10 Update Fail on Win 7 Pro x64 - error code 9C59




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Cannot update to IE10 (or 11) Code 9C59
Hey guys, Another user that is getting errors trying to update to IE10 and/or 11. I have been having this problem for a few months now but just decided it was time to seek help. I always get the Code 9C59 Error after it tries to install the update. I ran SFC and it found no issues. Attached...
Windows Updates & Activation
Windows update for IE10 on win7 64bit fails with error code 9c59
Windows update for IE10 on Windows 7 64bit fails continuously with error code 9c59. I tried the stand alone updater with the same results. All other windows updates complete successfully, it's just IE10 that continually fails. Don't know if this is related but I do have problems with IE8...
Windows Updates & Activation
Windows update for IE10 on win7 64 fails with error code 9c59
Hi, Windows update for IE10 on win7 64 fails continuously with errore code 9c59. Manual install resulted the same. I run sfc /scannow which didn't find any problem. I am attaching my CBS log. Can anyone help? Thanks,
Windows Updates & Activation
UPDATE FAIL: Code 9C59
Hi there, I try to update from IE9 to IE10, but every time I get the error message with Code 9C59. Could you please guide me through in how to get this update problem solved?
Windows Updates & Activation
Windows 7 HP x64 Update IE10 Error Code 9C59
Have spent all afternoon trying to sort this and am close to giving up but thought I would post some logs in here in one last attempt. Have completed all important and optional Windows updates but the installation of IE10 fails everytime with error 9C59. Have tried manual download and same issues....
Windows Updates & Activation
Windows update fails for IE10 on Win7 error code 9C59
Hi folks I found my way here after being unable to update to IE10 on Windows 7 (32) the windows update error is: "Internet Explorer 10 for Windows 7 Installation date: ‎09/‎05/‎2013 10:22 AM Installation status: Failed Error details: Code 9C59
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App