IE10 Update Fail on Win 7 Pro x64 - error code 9C59

Page 2 of 3 FirstFirst 123 LastLast

  1. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #11

    I've uploaded a file - d0cac.zip - to my SkyDrive at Noel's SkyDrive
    Please download and save it.
    Right-click on the saved file and select Extract all...
    Change the target to C:\ and click on Extract
    Close all windows (it would be a good idea to print these instructions!)
    Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
    Pick that
    You'll have to log in with your username and password.
    Pick the option to use a Command Prompt
    At the prompt type
    DIR C:\d0cac
    hit the enter key - if you get a 'Not Found' error try
    DIR D:\d0cac
    or
    DIR E:\d0cac

    The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

    XCOPY <drive>:\d0cac <drive>:\windows\winsxs /y /i /s /v /h

    (e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

    run the command (it should take almost no time)and when the prompt returns, type
    EXIT
    and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
    Now run SFC /SCANNOW in an Elevated Command Prompt
    then reboot and upload the new CBS.log file to your response


      My Computer
    Quote Quote

  3. dxc0chappie
    Posts : 16
    Windows 7 Professional x64
    Thread Starter
       New #12

    Hi, files extracted and xcopied, new CBS.log file attached.
    Thx
      My Computer
    Quote Quote

  4. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #13

    So far, so good - here's the list of outstanding errors...

    Code:
     Line 12742: 2013-08-26 22:16:53, Info                  CSI    00000345 [SR] Repairing 6 components
 Line 12743: 2013-08-26 22:16:53, Info                  CSI    00000346 [SR] Beginning Verify and Repair transaction
 Line 12746: 2013-08-26 22:16:53, Info                  CSI    00000348 [SR] Cannot repair member file [l:24{12}]"igdumd32.dll" of igdlh.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12750: 2013-08-26 22:16:53, Info                  CSI    0000034a [SR] Cannot repair member file [l:24{12}]"MFC90RUS.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12754: 2013-08-26 22:16:53, Info                  CSI    0000034c [SR] Cannot repair member file [l:32{16}]"comctl32.dll.mui" of Microsoft.Windows.Common-Controls.Resources, Version = 6.0.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"he-IL", VersionScope neutral, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12757: 2013-08-26 22:16:53, Info                  CSI    0000034e [SR] Cannot repair member file [l:26{13}]"vmsal.exe.mui" of Microsoft-Windows-VirtualPC-VMSAL.Resources, Version = 7.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture = [l:10{5}]"el-GR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12758: 2013-08-26 22:16:53, Info                  CSI    0000034f [SR] Cannot repair member file [l:18{9}]"vcomp.dll" of Microsoft.VC80.OpenMP, Version = 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, file is missing
 Line 12762: 2013-08-26 22:16:53, Info                  CSI    00000351 [SR] Cannot repair member file [l:24{12}]"MFC90KOR.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
    A couple of those are a trifle difficult to source - I'll have to do them tomorrow.
    Back then.
      My Computer
    Quote Quote

  6. dxc0chappie
    Posts : 16
    Windows 7 Professional x64
    Thread Starter
       New #14

    NoelDP said:
    So far, so good - here's the list of outstanding errors...

    Code:
     Line 12742: 2013-08-26 22:16:53, Info                  CSI    00000345 [SR] Repairing 6 components
 Line 12743: 2013-08-26 22:16:53, Info                  CSI    00000346 [SR] Beginning Verify and Repair transaction
 Line 12746: 2013-08-26 22:16:53, Info                  CSI    00000348 [SR] Cannot repair member file [l:24{12}]"igdumd32.dll" of igdlh.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12750: 2013-08-26 22:16:53, Info                  CSI    0000034a [SR] Cannot repair member file [l:24{12}]"MFC90RUS.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12754: 2013-08-26 22:16:53, Info                  CSI    0000034c [SR] Cannot repair member file [l:32{16}]"comctl32.dll.mui" of Microsoft.Windows.Common-Controls.Resources, Version = 6.0.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"he-IL", VersionScope neutral, PublicKeyToken = {l:8 b:6595b64144ccf1df}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12757: 2013-08-26 22:16:53, Info                  CSI    0000034e [SR] Cannot repair member file [l:26{13}]"vmsal.exe.mui" of Microsoft-Windows-VirtualPC-VMSAL.Resources, Version = 7.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture = [l:10{5}]"el-GR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 12758: 2013-08-26 22:16:53, Info                  CSI    0000034f [SR] Cannot repair member file [l:18{9}]"vcomp.dll" of Microsoft.VC80.OpenMP, Version = 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, file is missing
 Line 12762: 2013-08-26 22:16:53, Info                  CSI    00000351 [SR] Cannot repair member file [l:24{12}]"MFC90KOR.DLL" of Microsoft.VC90.MFCLOC, Version = 9.0.30729.5570, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
    A couple of those are a trifle difficult to source - I'll have to do them tomorrow.
    Back then.
    Hi Noel - any luck with sourcing these files?
    Thx.
      My Computer
    Quote Quote

  7. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #15

    Some - still trying to get hold of a couple...
      My Computer
    Quote Quote

  8. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #16

    I can't find the proper Visual C++ 2008 file versions anywhere safe
    It may simply be a case of installing the later SP1 version, which hopefully will scavenge the older file versions and registry entries...
    You can download it from here...
    Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) from Official Microsoft Download Center

    First attempt installing it in normal mode - if that fails, then use a clean boot procedure, and attempt it there....
    How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
      My Computer
    Quote Quote

  10. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #17

    Sorry - wrong version!
    Use this one instead...
    Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x64) from Official Microsoft Download Centre
      My Computer
    Quote Quote

  11. dxc0chappie
    Posts : 16
    Windows 7 Professional x64
    Thread Starter
       New #18

    Hi - wasn't sure if the installation of Visual C++ 2008 SP1 x64 worked or not, so I rebooted to clean boot, uninstalled SP1, then installed it ok.

    Rebooted, ran SFC /SCANNOW and CBS.log attched.

    Thx.
      My Computer
    Quote Quote

  12. NoelDP
    Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       New #19

    It's still there
    OK - let's proceed with the rest, and I'll keep looking.

    I've uploaded a file - d0cad.zip - to my SkyDrive at Noel's SkyDrive
    Please download and save it.
    Right-click on the saved file and select Extract all...
    Change the target to C:\ and click on Extract
    Close all windows (it would be a good idea to print these instructions!)
    Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
    Pick that
    You'll have to log in with your username and password.
    Pick the option to use a Command Prompt
    At the prompt type
    DIR C:\d0cad
    hit the enter key - if you get a 'Not Found' error try
    DIR D:\d0cad
    or
    DIR E:\d0cad

    The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

    XCOPY <drive>:\d0cad <drive>:\windows\winsxs /y /i /s /v /h

    (e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

    run the command (it should take almost no time)and when the prompt returns, type
    EXIT
    and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
    Now run SFC /SCANNOW in an Elevated Command Prompt
    then reboot and upload the new CBS.log file to your response
      My Computer
    Quote Quote

  13. dxc0chappie
    Posts : 16
    Windows 7 Professional x64
    Thread Starter
       New #20

    Ok, d0cad copied, latest CBS.log attached.
    Thx
      My Computer
    Quote Quote

 
Page 2 of 3 FirstFirst 123 LastLast

  Related Discussions
Cannot update to IE10 (or 11) Code 9C59
in Windows Updates & Activation

Hey guys, Another user that is getting errors trying to update to IE10 and/or 11. I have been having this problem for a few months now but just decided it was time to seek help. I always get the Code 9C59 Error after it tries to install the update. I ran SFC and it found no issues. Attached...
Windows update for IE10 on Windows 7 64bit fails continuously with error code 9c59. I tried the stand alone updater with the same results. All other windows updates complete successfully, it's just IE10 that continually fails. Don't know if this is related but I do have problems with IE8...
Hi, Windows update for IE10 on win7 64 fails continuously with errore code 9c59. Manual install resulted the same. I run sfc /scannow which didn't find any problem. I am attaching my CBS log. Can anyone help? Thanks,
Windows 7 HP x64 Update IE10 Error Code 9C59
in Windows Updates & Activation

Have spent all afternoon trying to sort this and am close to giving up but thought I would post some logs in here in one last attempt. Have completed all important and optional Windows updates but the installation of IE10 fails everytime with error 9C59. Have tried manual download and same issues....
Hi folks I found my way here after being unable to update to IE10 on Windows 7 (32) the windows update error is: "Internet Explorer 10 for Windows 7 Installation date: ‎09/‎05/‎2013 10:22 AM Installation status: Failed Error details: Code 9C59
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 18:55.
Find Us