Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: KB2813430, KB2862966 and KB2808679 update failed.

01 Sep 2013   #11
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The problem was probably caused by installing updates with faulty RAM - the bits got flipped during the install.

With a but of luck, I've cured the majority of them now....



I've uploaded a file - wksaa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it to your desktop.

Right-click on the file and select Extract All, and save to the default destination (which should be a folder on the desktop)

Create a new System Restore point

Open an Elevated Command Prompt, and run the following commands.

REN C:\Windows\System32\config\COMPONENTS COMPONENTS.OLD1
COPY %userprofile%\desktop\wksaa\COMPONENTS C:\Windows\System32\config

If you get an error with either command, STOP THERE - do not reboot! - post for instructions.

Assuming both commands go OK, reboot, and run another CheckSUR scan - post the new CheckSUR.log file.



My System SpecsSystem Spec
.
07 Sep 2013   #12
Warkris

Windows 7 Professional 64bit
 
 

I typed in the first command and got this error. Sorry for the late reply too.

Attachment 284942
My System SpecsSystem Spec
07 Sep 2013   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Boot to Safe Mode and try from there
My System SpecsSystem Spec
.

07 Sep 2013   #14
Warkris

Windows 7 Professional 64bit
 
 

Ok so I did all that and here is the log file.

Attachment 284946
My System SpecsSystem Spec
07 Sep 2013   #15
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That's reduced the errors to manageable levels


I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it -
upload the compressed file to your favoured fileshare site (preferably Dropbox or SkyDrive) and post a link.
My System SpecsSystem Spec
07 Sep 2013   #16
Warkris

Windows 7 Professional 64bit
 
 

My System SpecsSystem Spec
07 Sep 2013   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - components.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it to your desktop.

Right-click on the file and select Extract All, and save to the default destination (which should be a folder on the desktop)

Create a new System Restore point

Open an Elevated Command Prompt, and run the following commands.

DEL C:\Windows\System32\config\COMPONENTS.OLD1 /q
REN C:\Windows\System32\config\COMPONENTS COMPONENTS.OLD1
COPY %userprofile%\desktop\wfire\COMPONENTS C:\Windows\System32\config

If you get an error with any command, STOP THERE - do not reboot! - post for instructions.

Assuming both commands go OK, reboot, and run another CheckSUR scan - post the new CheckSUR.log file.
My System SpecsSystem Spec
07 Sep 2013   #18
Warkris

Windows 7 Professional 64bit
 
 

COPY %userprofile%\desktop\wfire\COMPONENTS C:\Windows\System32\config

is that line correct? Shouldn't it be COPY %userprofile%\desktop\COMPONENTS\COMPONENTS C:\Windows\System32\config ?

I'm asking because I got a file not found error
My System SpecsSystem Spec
07 Sep 2013   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Oops!
You're right - sorry about that!
(must be time for a break!)
My System SpecsSystem Spec
07 Sep 2013   #20
Warkris

Windows 7 Professional 64bit
 
 

haha it's cool, I'm just running the CheckSur again
My System SpecsSystem Spec
Reply

 KB2813430, KB2862966 and KB2808679 update failed.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
nvidia driver update failed in windows update
Hiya, just a while I ago I tried to install the NVidia driver update in my windows update but it says it failed after trying to install. Was wondering could this corrupt my video card driver or registery or can anything be done to make this error like it never happened before? Currently I'm using a...
Windows Updates & Activation
Security Update (KB2709715) - Failed to Update, Code 8020000E
G'day, I'm having some trouble installing the above update. I've run the MrFixIt utility, but still get an error trying to install this update. Can someone recommend a solution to try? This is an Asus X54C netbook running a clean install of Windows 7 Professional x64 OEM. Regards, Golden...
Windows Updates & Activation
Error 0x800b0100 when running windows update for KB2813430 and KB28086
Hi, some of you may already be familiar about this problem. Though i tried to follow the fixes provided on this forum but I cant seem to have any luck on getting this resolved. I am attaching the logs created upon running SURT, I'll be honest, I attempted to run SURT quite a few times in an...
Windows Updates & Activation
Many failed update on history windows failed to configure startup
I have been receiving many failed updates, and i have tried methods like using the troubleshooting method to fix it. I have also tried downloading the updates from Microsoft center which still doesn't work as it stated as "ungenuine update"... I have been getting windows failure to update during...
Windows Updates & Activation
there's a lot of failed update on windows update history?
i just reinstall my windows 7 home premium last night, and after i click the update button i left it alone and couple of hours later i saw a lot of failed update on windows update history? these unfinished update will it became a trash on my computer or just simply gone? how to delete these...
Windows Updates & Activation
Windows 7 update failed and laptop won't boot. Startup repair failed
I installed the latest round of Windows updates for my Win7 x64 install and it never completed (ran for about 24 hours) so I powered off the machine. Upon restarting, it said: "Windows failed to start. A recent hardware or software change might be the cause" and has instructions for using system...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App