Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't update Service Pack 1, error 80092004

13 Oct 2013   #11
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Either's fine - I'd much rather have too much information than too little!

Unfortunately, it looks as if you may have forgotten to Share the file - or not put it in your Public folder. please do so and post the new link.


My System SpecsSystem Spec
.
13 Oct 2013   #12
FissionMailed

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Either's fine - I'd much rather have too much information than too little!

Unfortunately, it looks as if you may have forgotten to Share the file - or not put it in your Public folder. please do so and post the new link.
oops, sorry. Haven't used SkyDrive before.

Should be in the Public folder now, I hope. https://skydrive.live.com/?mkt=en-GB...52F59FF0%21105
My System SpecsSystem Spec
13 Oct 2013   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That worked
There's nothing amiss in the SFC scan, and surprisingly little in the remainder of the CBS.log.


How is Windows Update behaving now?
Does SP 1 install now?

If not, please try running the CheckSUR tool again, and post the CheckSUR logs.
My System SpecsSystem Spec
.

13 Oct 2013   #14
FissionMailed

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by NoelDP View Post
How is Windows Update behaving now?
Does SP 1 install now?
hmm. Well, it still wouldn't manually install and SURT still gave me the same error. However, I rebooted my machine and whilst turning off it decided to install an update. After it rebooted, there was no mention of SP1 on the updater, though a further 69 updates had appeared. I began to install these and it froze on no. 67.. (a recent win7 security update, I did make a note of the specific update but used notepad which I can't check at the minute)

Rebooted the PC yet again, was informed "Installing updates 67 out of 69" during shut down, and then that it had failed to configure updates and was reverting changes and shutting down. Now everytime I boot it up this is the only message I see, don't even get to desktop.

1 step forwards 2 steps back...

EDIT: I can't even boot safe mode it would seem.
My System SpecsSystem Spec
13 Oct 2013   #15
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Hmm - not good

Can you boot to the Repair Environment?
(tap F8 during the POST, and select 'Repair My computer' from the list of options
My System SpecsSystem Spec
13 Oct 2013   #16
FissionMailed

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Hmm - not good

Can you boot to the Repair Environment?
(tap F8 during the POST, and select 'Repair My computer' from the list of options

Ok, It appears that it was just being temperamental. I've finally managed to boot in to windows, and rebooted a few times just to make sure it boots consistently.

Checked system info and it would seem that SP1 is installed now

SURT however is still giving the same error or failing to install / hanging (though I'm not sure I even need to run this now anyway?)

The update that just gave me problems (67 -69) was KB2864058 and has installed fine this time around.

Apart from SURT, everything looks good. Going to work my way though these 68 updates 1 by 1 now and hope for the best. I'll wait for them to have all installed before I give the all clear, but fingers crossed.
My System SpecsSystem Spec
13 Oct 2013   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please post your windowsupdate.log file (c:\Windows\windowsupdate.log) and I'll see if I can see anything relating to CheckSUR in there - also your latest CBS.log file.
My System SpecsSystem Spec
13 Oct 2013   #18
FissionMailed

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Please post your windowsupdate.log file (c:\Windows\windowsupdate.log) and I'll see if I can see anything relating to CheckSUR in there - also your latest CBS.log file.
Failed to install the first update I tried and went back to the installing update, failed configuring, rebooting situation I mentioned earlier.

seems SFC has found some errors.

CBS (current) and WU.log are both on my SkyDrive https://skydrive.live.com/?mkt=en-GB...52F59FF0%21105
My System SpecsSystem Spec
13 Oct 2013   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Interesting....
SFC found errors, but appears to have exited improperly so I had to go back into the logs to gather the data....
Code:
 Line 129791: 2013-10-13 22:29:55, Info                  CSI    0000029c [SR] Cannot verify component files for Microsoft-Windows-MediaPlayer-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
 Line 129794: 2013-10-13 22:30:00, Info                  CSI    0000029e [SR] Cannot repair member file [l:18{9}]"mfc42.dll" of Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 129801: 2013-10-13 22:30:02, Info                  CSI    000002a2 [SR] Cannot repair member file [l:18{9}]"mfc42.dll" of Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 130152: 2013-10-13 22:31:06, Info                  CSI    000002e3 [SR] Cannot repair member file [l:22{11}]"af031033.am" of Microsoft-Windows-SpeechRecognizerENU.ale, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 130155: 2013-10-13 22:31:11, Info                  CSI    000002e5 [SR] Cannot repair member file [l:22{11}]"af031033.am" of Microsoft-Windows-SpeechRecognizerENU.ale, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 130707: 2013-10-13 22:32:42, Info                  CSI    0000033b [SR] Cannot repair member file [l:30{15}]"mscordacwks.dll" of NetFx-MSCORDACWKS, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 130711: 2013-10-13 22:32:43, Info                  CSI    0000033d [SR] Cannot repair member file [l:30{15}]"mscordacwks.dll" of NetFx-MSCORDACWKS, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 130864: 2013-10-13 22:33:51, Info                  CSI    00000381 [SR] Cannot repair member file [l:24{12}]"AudioEng.dll" of Microsoft-Windows-Audio-AudioCore, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 130867: 2013-10-13 22:33:52, Info                  CSI    00000383 [SR] Cannot repair member file [l:24{12}]"AudioEng.dll" of Microsoft-Windows-Audio-AudioCore, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 131820: 2013-10-13 22:36:31, Info                  CSI    00000440 [SR] Cannot repair member file [l:24{12}]"SFLISTW7.dat" of Microsoft-Windows-MigrationEngine, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 131827: 2013-10-13 22:36:33, Info                  CSI    00000444 [SR] Cannot repair member file [l:24{12}]"SFLISTW7.dat" of Microsoft-Windows-MigrationEngine, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
CheckSUR ran - but seems to have crashed part way through after finding ~ 300 errors in the registry.


I think I see a repair install in your future

I would recommend trying the repair with the SP1 download - see the instructions here....

http://www.sevenforums.com/tutorials/3413-repair-install.html
My System SpecsSystem Spec
13 Oct 2013   #20
FissionMailed

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Interesting....

CheckSUR ran - but seems to have crashed part way through after finding ~ 300 errors in the registry.


I think I see a repair install in your future

I would recommend trying the repair with the SP1 download - see the instructions here....

http://www.sevenforums.com/tutorials/3413-repair-install.html
Ouch, that's a lot of errors.

The repair install looks a little complicated, I'm not even sure which of the 3 options would be applicable to me. A question too, would it give the same result as another clean install or does it work differently? (though with the same SP1 issue happening twice in a row on clean installs, I doubt a new install would be any different) That said, I have nothing on here, so a new install is no biggy for me.
My System SpecsSystem Spec
Reply

 Can't update Service Pack 1, error 80092004




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
8007000D error Cannot update service pack 1
8007000D error Cannot update service pack 1, just did a restore to factory. Used a brand new service/recovery disks bought directly from acer for an aspire 5336-2524. Everything else is fine but continually fail to update and install service pack 1. I tried the suggested help center and the...
Windows Updates & Activation
Error message 800b0100 when trying to update service pack 1
I've tried to find a solution to this problem but nothing works, I did the windows update standalone package and it didn't work. I could use some help.
Windows Updates & Activation
Windows Service Pack 1 Update Error - Reverting Changes
Recently, I've re-installed windows 7 and proceeded with the windows 7 updates, but it gave me the 800f0826 error. I've tried the methods in the other guides and whatnot but it has been of no help. I've tried the troubleshooter, the standalone package which installed the hotfix, all to no avail....
Windows Updates & Activation
Error trying update to service pack 1 Windows 7 Premium
Hi guys, first of all, sorry for my english, i'm from Portugal, and i see that in this forum the people maybe can help me. So, the problem that i have is when i try update my windows 7 to Service Pack 1 in Windows Update. I leave here a print of what show in my pc. Update Error Print ...
Windows Updates & Activation
Windows 7 Service Pack 1 update error 800b0100
Hello, I have seen that this problem has been solved before on this forum for other people, but that it is different in each case. I have tried to install windows Service Pack Update through windows update and also downloading it. Both won't install due to error 800b0100. I also dowloaded the...
Windows Updates & Activation
Critical error after Service Pack 1 Windows update
I installed service pack 1 and a few other updates last night on my dad's work computer. I think the computer somehow managed to power off last night before completing the update even though it was plugged in. Now the computer can not boot windows because it get's stuck around update 300 and...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App