Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple errors after a new repair install

23 Nov 2013   #11
total confusion

Windows 7 Pro
 
 

I ran the surt in between conversations Here are the other logs.


My System SpecsSystem Spec
.
23 Nov 2013   #12
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

It's still attempting to load a 'Null' driver/service, for some reason.

Let's see if we can find the cause.

Open an Elevated Command Prompt, and run the following commands

REG QUERY HKLM\SYSTEM\CurrentControlSet\Services\Null
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_NULL
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\Root\NULL
REG QUERY HKLM\SYSTEM\CurrentControlSet\Enum\NULL

(note - in theory some should produce errors as responses!)
post the output



Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
23 Nov 2013   #13
total confusion

Windows 7 Pro
 
 

Not sure what this says, hope you do LOL
My System SpecsSystem Spec
.

23 Nov 2013   #14
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I think we've found the problem



I've uploaded a file - tcnaa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it to your desktop.
Right-click on the saved file and select Extract all...
Save it to the default location
This should create a file nullenum.reg

right-click on the file, and select Merge
Accept the warnings, - you should then get a 'Success' message.
Close all windows, and reboot.

Then check the Device Manager and see if Null has re-appeared (it should - but this time without the yellow triangle)

If it has, reboot again and then post the new Event Logs.
My System SpecsSystem Spec
23 Nov 2013   #15
total confusion

Windows 7 Pro
 
 

Is this the waring I should be seeing. Before this one it said not to merge it if I didn't trust it
My System SpecsSystem Spec
23 Nov 2013   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Yep - that's the one - you may also get a request for elevation.
My System SpecsSystem Spec
23 Nov 2013   #17
total confusion

Windows 7 Pro
 
 

Going to reboot now
My System SpecsSystem Spec
23 Nov 2013   #18
total confusion

Windows 7 Pro
 
 

Well I was hoping not to see all of that but there it is.
Should I reset that DNS back to TCP/IP v6?
I'm glad I keep deleting these files off the desktop, by now I wouldn't know which one was the right one to send you LOL
My System SpecsSystem Spec
23 Nov 2013   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The NULL driver is still not loading properly.


Please open an Elevated (Administrator) Command Prompt window and use the following commands....

net start null
sc qc null
sc queryex null
sc qprivs null
sc qsidtype null
sc sdshow null
sc start null


Copy and paste the output to your reply


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
23 Nov 2013   #20
total confusion

Windows 7 Pro
 
 

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>*net start null*
'*net' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>*sc qc null*
'*sc' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>*sc queryex null*
'*sc' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>*sc qprivs null*
'*sc' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>*sc qsidtype null*
'*sc' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>*sc sdshow null*
'*sc' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>*sc start null*
'*sc' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>
C:\Windows\system32>
C:\Windows\system32>
My System SpecsSystem Spec
Reply

 Multiple errors after a new repair install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Startup Repair to infinite reboot loops, Repair errors 0x5 & 0x490
Firstly, thanks for reading. My PC runs Windows 7 x64. I built it myself about a year ago for gaming. Occasionally running games I would BSOD and it would suck. I'd update all my drivers or try some game-specific fix and usually if I didn't fix it, I would just start playing something else...
General Discussion
Multiple BSODs, Application errors & can't install ANY drivers.
Hi guys, My computer has been having multiple issues as of late. First of all, I can't install ANY driver at all. Secondly, I have been having multiple BSODs probably from the lack of updated drivers. It has become so bad that inserting an USB into my computer in normal mode causes a BSOD,...
BSOD Help and Support
What are the most common repair install issues/errors
Going to try my first attempt at a repair install based on the tutorial. Have a Win 7 Pro 32bit system. Have read thru Brinks tutorial pretty thoroughly but I'm wondering: 1) Assuming a successful system repair...how long should the whole operation take ? 2) Other than the SP1 issue -...
Installation & Setup
System Restore Always Gives Errors - Is it Time for a Repair Install?
Hi all I brought the machine about a year ago, put 7 on it, and never had to do a System Restore until about a month ago. After a month of twiddling around, it keeps happening every time I try one. I apologise that I have not got a copy of exactly what the message is. It (no...
Backup and Restore
BSOD, Startup Repair, System Repair and other errors on nearlly new PC
I took delivery of a new (and expensive!) PC in January but last week it started giving me constant and varied errors. The isssues range from Blue screen, black screen, failing to load windows, startup repair needed often, system restore needed often, and when it does load windows there are...
BSOD Help and Support
Multiple memory errors after clean install of windows7 help!!
Ok guyshere is my problem. I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processorposts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I dont...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App