Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows update failure cod 800B0001

31 Dec 2013   #1
plumpf

Windows 7 Ultimate x64
 
 
windows update failure cod 800B0001

hi
i cannot update windows 7 sp1 . it is showing the error code 800B0001 . the last updates shown were almost 5 months ago.this system is part of a domain and all updates are applied through sccm client. however on this particular system when we go to control panel and click "Configuration Manager" in the connection type it is showing as unknown. (same as shown in this link )


i have tried uninstalling it and reboot and reinistall .. no luck.

i ran sfc /scannow 4 times and rebooted after each scan .. but each time it gave me error that. is shown below.

i also ran update readiness tool and i think in its log files reports no problem . it is attached . its name is checksur.log

besides i also tried a lot of Microsoft Fixit tools and non worked.

i am attaching CBS log file in rar format.

any help ? any solution ?

thanks


My System SpecsSystem Spec
.
31 Dec 2013   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

Odd - that's the second time this week that someone's posted a clear CBS.log while the CMD screen shows errors! - as you say, CheckSUR is clear (was in the other thread, too, if I remember right!)


Please post the c:\Windows\windowsupdate.log file
My System SpecsSystem Spec
01 Jan 2014   #3
plumpf

Windows 7 Ultimate x64
 
 

I will upload the above log file as soon as i get to the pc.

As we are using SCCM to update windows and the configuration manager was showing in connection type unknown and also various tabs of configuration manager didn't matched to those of ok systems. So after googling I got a hint that cryptographic files might be corrupt and there were commands to re-register them. And doing so those failed. I will post the exact files and the error screenshots.

Thanks
My System SpecsSystem Spec
.

02 Jan 2014   #4
plumpf

Windows 7 Ultimate x64
 
 

here is the windows update log file.

should a repair installation of windows solve this issue ?( choosing upgrade during install ) ?
also that system has bitlocker setup .
regards

Quote:
2014-01-01 23:13:08:897 956 b7c AU #############
2014-01-01 23:13:08:897 956 b7c AU ## START ## AU: Search for updates
2014-01-01 23:13:08:897 956 b7c AU #########
2014-01-01 23:13:08:899 956 b7c AU <<## SUBMITTED ## AU: Search for updates [CallId = {7B28A640-6ABC-4EAA-9894-36780BF56874}]
2014-01-01 23:13:08:899 956 bd8 Agent *************
2014-01-01 23:13:08:899 956 bd8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-01-01 23:13:08:899 956 bd8 Agent *********
2014-01-01 23:13:08:899 956 bd8 Agent * Online = Yes; Ignore download priority = No
2014-01-01 23:13:08:899 956 bd8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-01-01 23:13:08:899 956 bd8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-01-01 23:13:08:899 956 bd8 Agent * Search Scope = {Machine}
2014-01-01 23:13:08:899 956 bd8 Setup Checking for agent SelfUpdate
2014-01-01 23:13:08:899 956 bd8 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-01-01 23:13:08:924 956 bd8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-01-01 23:13:08:931 956 bd8 Misc Microsoft signed: Yes
2014-01-01 23:13:08:932 956 bd8 Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab are not trusted: Error 0x800b0001
2014-01-01 23:13:08:932 956 bd8 Setup WARNING: SelfUpdate check failed to download package information, error = 0x800B0001
2014-01-01 23:13:08:932 956 bd8 Setup FATAL: SelfUpdate check failed, err = 0x800B0001
2014-01-01 23:13:08:932 956 bd8 Agent * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-01-01 23:13:08:933 956 bd8 Agent * WARNING: Exit code = 0x800B0001
2014-01-01 23:13:08:933 956 bd8 Agent *********
2014-01-01 23:13:08:933 956 bd8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-01-01 23:13:08:933 956 bd8 Agent *************
2014-01-01 23:13:08:933 956 bd8 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-01-01 23:13:08:933 956 7d4 AU >>## RESUMED ## AU: Search for updates [CallId = {7B28A640-6ABC-4EAA-9894-36780BF56874}]
2014-01-01 23:13:08:933 956 7d4 AU # WARNING: Search callback failed, result = 0x800B0001
2014-01-01 23:13:08:933 956 7d4 AU # WARNING: Failed to find updates with error code 800B0001
2014-01-01 23:13:08:933 956 7d4 AU #########
2014-01-01 23:13:08:934 956 7d4 AU ## END ## AU: Search for updates [CallId = {7B28A640-6ABC-4EAA-9894-36780BF56874}]
2014-01-01 23:13:08:934 956 7d4 AU #############
My System SpecsSystem Spec
02 Jan 2014   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

Interesting error there - I would have expected that to be shown up in either SFC or (more likely) CheckSUR.

Try this first.

Open an Elevated Command Prompt
Run the following commands

NET STOP WUAUSERV
REN C:\WINDOWS\SoftwareDistribution SDOLD
NET START WUAUSERV

wait 15 minutes, and reboot
then wait 10 minutes, and open Windows Updates, and run a Check for Updates.

Install only the oldest update found - and reboot once installed
then go back to Windows updates and install the others.
My System SpecsSystem Spec
02 Jan 2014   #6
plumpf

Windows 7 Ultimate x64
 
 

No luck still getting same error.
My System SpecsSystem Spec
02 Jan 2014   #7
plumpf

Windows 7 Ultimate x64
 
 

I think I have a bit of change.
Though I was getting same error when I clicked check for update. But on clicking online update it went ahead and found update I selected few of the oldest updates that amount to approx 11mb but it is now downloading them. Approximately 5% done .bur it's painfully slow.

We are using SCCM for updates.
My System SpecsSystem Spec
02 Jan 2014   #8
plumpf

Windows 7 Ultimate x64
 
 

Configuration manager is showing like this
My System SpecsSystem Spec
02 Jan 2014   #9
plumpf

Windows 7 Ultimate x64
 
 

The last few updates that i selected as i mentioned in my previous post are installed. But it seems that only online updates are installed.
It's not updating from SCCM.
My System SpecsSystem Spec
02 Jan 2014   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

My knowledge of SCCM is extremely limited ... in fact almost totally non-existent.

I'll have to do some research - if you can point me at some relevant sites, that would be useful!
My System SpecsSystem Spec
Reply

 windows update failure cod 800B0001




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 - Update KB976932 and KB982526 update failure- error 800b100
Hey, I'm trying to install update KB976932 (Windows Service pack 1 for 64bit) and KB982526 (Microsoft .NET Framework 3.5 SP1) but I keep getting error 800b100 which stops me from doing so. I've tried deactivating my firewall; manually installing from the microsoft website; and using the...
Windows Updates & Activation
Windows 7 Update Failure
Several attempts to install Windows 7 updates KB2894854, KB2972216 and KB2889914 have all failed with error codes 641 and 6B7. I have also received errors 0X80070641 (Windows Installer Service could not be accessed), 0X80070057, and 0X80240009 (Installer encountered error) during my troubleshooting...
Windows Updates & Activation
Windows 7 Update Failure
Been having window 7 pro update problem for about a year now. I had to reload OS twice. It works for several months and then the same problem. Now I can't even update anything. Below are the error messages I get. The 1st screenshot is when I launch windows update. The 2nd is when I click check...
Windows Updates & Activation
Windows 7 SP1 Update failure
Hey all! I'm having the typical update failure for the SP1 update that i've seen alot of people have! NoelDP seems to fix it just by providing us with the right packages, and I really hope he can do the same for me :( I've attached my System Update Readiness Log! Thank you for any help you can...
Windows Updates & Activation
Windows 7 x64 SP1 Update failure
Hi all, My computer keeps trying to install Service Pack 1 for Windows 7 Update (KB976932) and never succeeds. It has been happening since April 2013 as I see in the update history, each time attempting to install it during shutting down. For a few minutes after computer launch Windows Update...
Windows Updates & Activation
Windows SP1 Update Failure
Hi, I seem to have the same errors installing the SP1 as other, as yet I have not been successful. I ran the system update readiness tool, it ran to completion but failed to fix things well enough. The failed updates error is trust_e_nosignature (0x800b0100). I have attached the CBS.zip file as I...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App