Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SP1 installation on Windows 7 fails (Code 8024200D)

25 Jan 2014   #11
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 


Wrong error message - but it shouldn't hurt to try it!

The actual error is the first line in the snip - the rest follows on from that.
The trick is to work out which registry Key is the one that's missing. (and why CheckSUR isn't finding anything either)

Please check and see if you can find KB2667402 installed or not...

Do searches in the following folders for the string 'KB2667402' (without the quotes)

C:\Windows\Servicing\Packages
C:\Windows\System32

Is the update listed in Installed Updates?
Is it listed in the Update History? (how many times, and with what results?)


My System SpecsSystem Spec
.
25 Jan 2014   #12
itse0815

Windows 7 Prof. SP1 64bit
 
 

I'm sorry for answering lately but i was a little bit busy today...brother moved into new flat...
I tried some things...but no success

1.) On a computer running Windows 7 and Windows Server 2008 R2, service pack 1 installation fails with error message 0x800f0826
I checked the the permissions for the user groups 'SYSTEM' and 'Administrators' for the files usbstor.inf and Usbstor.pnf. First both user groups had already full control/access (?!) for both files and it wasn't possible for me to change the 'permit' permissions (grayed out). I could only do the 'refuse' stuff. I added the user, with which i'm logged in, to the security tab and gave him full access for both files. I tried a installation of sp1 via windows update, after a reboot, but unfortunately it wasn't successful. Afterwards i deleted the user from the security tab for both files.

PS#1: I checked through the Microsoft Management Console if the user, which i'm using, is part of the user group 'Administrators' and yes he is. I'm also checked the account type under 'system control' -> 'user accounts'. There stands 'Administrator'.

PS#2: I checked two updates for installation: SP1 x64 (KB976932) which and Defnition Update for Windows Defender (KB915597, Definition 1.165.2532.0). Installing sp1 fails but the definition was installed succesfully. I don#t know if this information is helpfully for you but i thought i should tell it.

2. Try another user from the machine
There are two users configured on the machine. The user my girlfriend is using for work and i tried to use so far. The second one is called 'Administrator' ...user group and account type is Administrator...
I ran windows update and installing sp1 fails with the same error message like before.
My System SpecsSystem Spec
25 Jan 2014   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

No problem- I've been a little tied up lately myself!
PLease provide the data I asked for in post #11.

I'm a little worried that the Administrator account has been enabled - it's there really for emergency use only - but we'll worry about that nicety once we have things working properly again.
My System SpecsSystem Spec
.

25 Jan 2014   #14
itse0815

Windows 7 Prof. SP1 64bit
 
 

Quote   Quote: Originally Posted by NoelDP View Post

Wrong error message - but it shouldn't hurt to try it!

The actual error is the first line in the snip - the rest follows on from that.
The trick is to work out which registry Key is the one that's missing. (and why CheckSUR isn't finding anything either)

Please check and see if you can find KB2667402 installed or not...

Do searches in the following folders for the string 'KB2667402' (without the quotes)

C:\Windows\Servicing\Packages
C:\Windows\System32

Is the update listed in Installed Updates?
Is it listed in the Update History? (how many times, and with what results?)
Is the update listed in Installed Updates?
The update KB2667402 is listed in installed updates.
Code:
Security Update for Microsoft Windows (KB2667402)
Program: Mircosoft Windows
Version:
Publisher: Microsoft Corporation
Installed at: 19.06.2012
Is it listed in the Update History? (how many times, and with what results?)
It's not listed. The update history also just contains entries for the days 24.01.2014 and 25.01.2014...not entries from the past.

Search in 'C:\Windows\Servicing\Packages'
see picture 'windows_servicing_packages.png'

Search in 'C:\Windows\System32'
see picture 'windows_system32.png'
My System SpecsSystem Spec
25 Jan 2014   #15
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Hmmm - try this.
Uninstall KB2667402.
Reboot
then try Service Pack 1 from the standalone download.
Windows 7 und Windows Server 2008 R2 Service Pack 1 (KB976932) aus dem Microsoft Download Center herunterladen.
My System SpecsSystem Spec
25 Jan 2014   #16
itse0815

Windows 7 Prof. SP1 64bit
 
 

Uninstall fails with Message 'An error occured. It could not be all removed uninstalled.'

I did not reboot and installed the sp1 from standalone version.
My System SpecsSystem Spec
25 Jan 2014   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

SP1 installed from the standalone already?? please post the new C:\Windows\windowsupdate.log either way.
My System SpecsSystem Spec
25 Jan 2014   #18
itse0815

Windows 7 Prof. SP1 64bit
 
 

Sorry i did NOT installed the sp1...sorry my mistake
My System SpecsSystem Spec
25 Jan 2014   #19
itse0815

Windows 7 Prof. SP1 64bit
 
 

I tried to install the sp1 from 7601.17514.101119-1850_Update_Sp_Wave1-GRMSP1.1_DVD.iso from Microsoft Download Center
It ran fine for a while, maybe longer than before, and ended with the error ERROR_FILE_NOT_FOUND (0x80070002).
I searched for the code, came to Windows Update error "0x80070002" or "0x80070003" and run the FixIt under solution for windows 8.1, 8 or 7. The result is in fixit.pdf applied (in german but I can add appropriate translations as comments if necessary).
My System SpecsSystem Spec
26 Jan 2014   #20
itse0815

Windows 7 Prof. SP1 64bit
 
 

Great news...sp1 installed successfully

Ok what i did was:
I googled from the result (see 1.png) the error code 0x800f081f, i came to this site and from there to this article. I took a look into the system event log and found a entry (see error_sys_log.png).
I run an the command
Code:
dism /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
in an elevated cmd-window, like he described, and it uninstalled the package successfully. After a reboot and another run from 7601.17514.101119-1850_Update_Sp_Wave1-GRMSP1.1_DVD.iso, the sp1 was installed

I thank you for your support in these hard times
My System SpecsSystem Spec
Reply

 SP1 installation on Windows 7 fails (Code 8024200D)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
.net 4 installation fails with error code: (0x80070643)
Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log) "MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4...
Drivers
Windows Update Failed, error code - 8024200D
Hello, My windows update keeps failing on the same 5 updates with the error code 8024200D , This is really annoying me, I have tried everything on the internet i could find and nothing has worked, Can anybody help?, Thank you, Sean. Windows 7 Professional 64bit: Windows 7 Service Pack 1...
Windows Updates & Activation
Windows 7 Home Premium Installation SP1 Fails Error Code:8024200D
Following the Windows Update Posting Instructions I have met a difficulty in that I see the maximum zip file upload is limited to 8MB. My CBS.zip file is 27.2MB and I would appreciate advice of any steps I should take before proceeding further. I have installed the System Update Readiness Tool...
Windows Updates & Activation
Error Code 800B0100 and 8024200D
Hi can please get some help my laptop doesn't seem to want to install the following updates: Security Update for Windows 7 for x64-based Systems and windows 7 SP 1 try almost everything from downloading fix it and System Update Readiness Tool. Checking System Update Readiness. Binary...
Windows Updates & Activation
Windows 7 Service Pack 1 fails to install error code 8024200D
Hi just logged into the forum and hope someone can help. I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and...
Windows Updates & Activation
windows 7 update code 8024200d
I am getting a bunch of update errors. I have not been able to get SP1 installed and it seems as if the system readiness tool is not cooperating well either. I have attached my CBS logs so you can see if that helps pinpoint the issue.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App