Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows 7 x64 SP1 KB976932 failing, error code 802400D

30 Mar 2014   #1
Anas78

windwos 7 prof 64 bit
 
 
windows 7 x64 SP1 KB976932 failing, error code 802400D

I keep getting error when trying to install SP1, , SURT & SFC scan shows many corrupted system files, already replaced them except two manifest files (for french language which I never use), I couldn`t find it from another computer.

my checkSUR log

Attachment 312249


SFC log

Attachment 312250


Please advice specially for the corrupted manifest files.

Regards,


My System SpecsSystem Spec
.
01 Apr 2014   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

CheckSUR shows the following problems -
Code:
Unavailable repair files:
 winsxs\manifests\amd64_wiaxx002.inf.resources_31bf3856ad364e35_6.1.7600.16385_fr-fr_fb232f98da6dc9a2.manifest
 winsxs\manifests\amd64_wiacn001.inf.resources_31bf3856ad364e35_6.1.7600.16385_fr-fr_34af38bae7a3820c.manifest
The SFC extract you posted shows only one problem
Code:
2014-03-24 17:34:56, Info                  CSI    00000232 [SR] Cannot repair member file [l:24{12}]"netiougc.exe" of Microsoft-Windows-TCPIP, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I'd much rather see the entire CBS.log file - there is a lot more data in it that may be relevant.

I'll try an post a fix protocol for the CheckSUR problems later - they need to be fixed before we address the SFC problems anyhow.
My System SpecsSystem Spec
01 Apr 2014   #3
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Hmm - I didn't notice earlier that these files are localised French ones, and from the original install, rather than updates.

I'm going to have to ask around and see if anyone reputable has copies that I can use.

Don't run away!
My System SpecsSystem Spec
.

02 Apr 2014   #4
Anas78

windwos 7 prof 64 bit
 
 

Thanks NoelDP, but I believe that the files are not from original install, since I asked for copies from colleagues having exactly same laptops (been provided by same supplier), but they did not found the files within their machines !!
My System SpecsSystem Spec
02 Apr 2014   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The file versions are from the RTM, and therefore on the original install disks - they should be present on any French install.
I'll have a good hunt later and see if I can find them in the MUI pack.
My System SpecsSystem Spec
05 Apr 2014   #6
Anas78

windwos 7 prof 64 bit
 
 

Any update plz ?
My System SpecsSystem Spec
05 Apr 2014   #7
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Sorry about the delay!

With luck this should do the trick...


I've uploaded a file - a78aa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder a78aa in the same place.
Open this folder - there should be one folder inside it (Manifests)

Copy the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

Then run a new SFC /SCANNOW and post the entire CBS.log file (you'll have to copy it to the desktop first, then compress it)
My System SpecsSystem Spec
05 Apr 2014   #8
Anas78

windwos 7 prof 64 bit
 
 

Many thanks for the files, the issue for corrupted Manifests been resolved once I run CheckSUR tool with the uploaded files been copied to Manifest folder.

Summary:
Seconds executed: 1812
Found 2 errors
Fixed 2 errors
CSI Manifest Failed Catalog Check Total count: 2
Fixed: CSI Manifest Failed Catalog Check. Total count: 2

===========================================

running SFC /scannow, still produce the below error :

2014-04-05 14:09:50, Info CSI 0000032c [SR] Beginning Verify and Repair transaction
2014-04-05 14:09:50, Info CSI 0000032e [SR] Cannot repair member file [l:24{12}]"netiougc.exe" of Microsoft-Windows-TCPIP, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-05 14:09:50, Info CSI 00000330 [SR] Cannot repair member file [l:24{12}]"netiougc.exe" of Microsoft-Windows-TCPIP, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-05 14:09:50, Info CSI 00000331 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2014-04-05 14:09:50, Info CSI 00000334 [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??\C:\windows\SysWOW64"\[l:24{12}]"netiougc.exe"; source file in store is also corrupted
2014-04-05 14:09:50, Info CSI 00000336 [SR] Repair complete
2014-04-05 14:09:50, Info CSI 00000337 [SR] Committing transaction
2014-04-05 14:09:50, Info CSI 0000033b [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired

I already got the file (netiougc.exe) from another laptop with same arch and windows version, but still having the same error which prevent downloading SP1 (same error code 802400D)

any advice?
My System SpecsSystem Spec
05 Apr 2014   #9
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please post the FULL CBS.log file

You need to replace the file using the correct version, in the proper manner - or you will continue to get problems, or even make things worse.
How did you get around the fact that you don't normally have permissions to modify the target location?
My System SpecsSystem Spec
05 Apr 2014   #10
Anas78

windwos 7 prof 64 bit
 
 

I already replaced the file with another version following the procedure of (takeown /f , then icacls Path_And_File_Name, then Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination) but the error still exist when I run SFC /scannow.

initially, there was many corrupted files which I replaced and no more shown on the log file, except for the (netiougc.exe) which still generate an error even after replacement.
My System SpecsSystem Spec
Reply

 windows 7 x64 SP1 KB976932 failing, error code 802400D




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Failing updates in Windows update (Error: Code 800706F7)
So here goes my story. After +- 3 years of use I decided to format and to do a clean install of Windows 7 Home Premium through an USB install. All goes well and the first thing I do is updating by using Windows update. All updates succeed and I install all other programs needed for personal use....
Windows Updates & Activation
Windows updates failing Error code 80070216 and 9C47
I did a clean install of windows 7 after installing a new motherboard and CPU but windows updates are not going through and I think it may be a major security risk. It is showing 100 important updates that need to be installed, but when I start updating it is showing 0kb total, 0% complete. After...
Windows Updates & Activation
Failing on Windows Update KB27773072 (error code 0x8024200D)
Hi guys. This update is failing to install. Attached is the CBS and screenshot. Thanks in advance to all you good ppl out there.
Windows Updates & Activation
Windows 7 SP1 installation failing. Error code 800F0816
I run Windows 7 Home Premium on SSD harddrive. Windows 7 SP1 installation is failing. Package KB976932 is downloaded successfully but configuring update ends at 30%. After automatic reboot startup repair shows message that computer is unable to start and a system restore is needed. Windows...
Windows Updates & Activation
Windows Updates all failing - Error Code 80070034
I have Windows 7 SP1 x64 Ultimate installed. For some reason my Windows Updates started failing with error code 80070034 I ran Sfc /scannow and it bombs out at 8% with the error "Windows Resource Protection could not perform the requested operation" From the CBS log, these are the errors...
Windows Updates & Activation
Windows 7 updates failing with error code 800736B3
Hi, after successfully installing windows 7 (my first windows install since XP, after which I moved to Ubuntu) and doing the initial set-up etc., installing my own anti virus software and MS Office etc, I thought it was time to let it update itself. however, every time I tell it to update then...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App