Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IE 11 x64 update failing Error 9c48

02 Sep 2014   #1
techke10

Win 7 Pro X32 and X64
 
 
IE 11 x64 update failing Error 9c48

Hi and thank you in advance for your help.

I work for a school and am having an issue with IE 11 on many machines I just imaged. IE will not go to internal intranet links and is many times not loading or slowly loading pages. I read in another forum to uninstall the IE 11 update. I did this on one computer, rebooted, then tried to manually install IE 11. However, that didn't work. So, I let it do updates. It pulled down IE 9, IE 10, and IE 11 in windows updater. I performed the updates 3 times, each time with one failing until I am at the final update which is IE 11 and it fails. I performed a registry fix using CCleaner, but no dice. I have seen on some other threads here that after running the CheckSUR tool, there has been a fix given. I was wondering if this is something I need to do for every machine (about 18) or if there is a way I can fix it myself. Thanks for any help!


Machine Specs

HP Compaq DC7800 CMT
Win 7 pro x64
3 gb RAM
500 gb Seagate HD
NVIDIA GeForce Graphics Card
Intel Core 2 Duo
Microsoft Forefront Endpoint


My System SpecsSystem Spec
.
03 Sep 2014   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)
My System SpecsSystem Spec
09 Sep 2014   #3
techke10

Win 7 Pro X32 and X64
 
 

Ok, sorry about not posting correctly. I have run the CheckSUR tool and then ran the SFC check. I have attached both the sfcdetails log as well as the CBS log file(s). I will have to do two more posts below with CBS Log files split because of the size. There is one that I cannot compress lower than 15mb. I may not be able to upload that cab file. I could share it via Google Drive if that would work. Please help me know if there is anything else I need to do. Thanks!
My System SpecsSystem Spec
.

09 Sep 2014   #4
techke10

Win 7 Pro X32 and X64
 
 

Here is the next part of the CBS log file. I couldn't get the one to upload that was 15 mb.
My System SpecsSystem Spec
09 Sep 2014   #5
techke10

Win 7 Pro X32 and X64
 
 

Last one.
My System SpecsSystem Spec
09 Sep 2014   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

No problem

Here's the errors from the SFC scan...
Code:
 Line 3587: 2014-09-09 08:18:36, Info                  CSI    00000347 [SR] Repairing 2 components
 Line 3588: 2014-09-09 08:18:36, Info                  CSI    00000348 [SR] Beginning Verify and Repair transaction
 Line 3591: 2014-09-09 08:18:36, Info                  CSI    0000034a [SR] Cannot repair member file [l:22{11}]"winload.exe" of Microsoft-Windows-BootEnvironment-OS-Loader, Version = 6.1.7601.17556, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 3594: 2014-09-09 08:18:36, Info                  CSI    0000034c [SR] Cannot repair member file [l:26{13}]"winresume.exe" of Microsoft-Windows-BootEnvironment-OS-Loader, Version = 6.1.7601.17556, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 3597: 2014-09-09 08:18:36, Info                  CSI    0000034e [SR] Cannot repair member file [l:30{15}]"winload.exe.mui" of Microsoft-Windows-BootEnvironment-OS-Loader.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
the CheckSUR scan was clear.

I'll post a fix protocol for these errors later.
My System SpecsSystem Spec
09 Sep 2014   #7
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - t10aa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\t10aa
hit the enter key - if you get a 'Not Found' error try
DIR D:\t10aa
or
DIR E:\t10aa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\t10aa <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
10 Sep 2014   #8
techke10

Win 7 Pro X32 and X64
 
 

Ok. Followed the above. Again, I have many files so am putting them as separate attachments. There is one Cabinet File that is 15 mb and won't compress to a size that can be uploaded. Let me know if you would like me to share the whole file via Google Drive or OneDrive. Thanks!
#1
My System SpecsSystem Spec
10 Sep 2014   #9
techke10

Win 7 Pro X32 and X64
 
 

Here is #2
My System SpecsSystem Spec
10 Sep 2014   #10
techke10

Win 7 Pro X32 and X64
 
 

Here is #3
My System SpecsSystem Spec
Reply

 IE 11 x64 update failing Error 9c48




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
IE update Error 9C48
I have an update "Windows Explorer 9 for Windows 7" update which terminates with the error code 9C48. I have looked at a lot of fixes on the Web & this Forum and none seem to work. I have tried the Command line prompt -:FORFILES /P %WINDIR%\servicing\Packages /M...
Windows Updates & Activation
IE 11 update fails. Error: 9C48
Ive recently bought a new laptop and I installed all the drivers I got and I also update everything via Windows Update except this IE 11 update. I cant install it at all. Any solution?
Windows Updates & Activation
Error code 9C48 when trying to update IE9
Hello, I'm trying to install an update to IE9 but get the error code 9C48. I've tried to uninstall IE9 but it is not listed in the Windows Update section. Originally I was trying to install win7 SP1, but was getting an error saying "newer software alreay installed" I think. Any help...
Windows Updates & Activation
Error 9C48 with IE9 update on win7 64
I get an error 9C48 when trying to update IE9 on win7 64bit.
Windows Updates & Activation
Windows update error 9C48, Internet Explorer update.
Hello. It all started couple of days ago when I wansn't able to start my Skype, because at the login window Skype uses Internet Explorer:( I've been trying couple of days to do something. At first I was getting internet explorer 10 update error, but somehow, magically, that update installed, but...
Windows Updates & Activation
IE9 W7 64-bit update keeps failing (error 9C48)
I got this windows IE9 update 36.7 mb, but no matter what I do the update fails after restore point is created. It seems I got the same problem as here: Update fails with error code 9C48. - Microsoft Answers but it keeps failing. I tried disabling my Avast AV but no luck. Any ideas how to fix this?
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App