Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IE 11 Windows Update error 9C48 with Windows 7 SP1 x64

27 Sep 2014   #1
DruidicWytch

Windows 8 Pro x64
 
 
IE 11 Windows Update error 9C48 with Windows 7 SP1 x64

Stuck on Internet Explorer 10, can't update to IE 11 due to 9C48 error.


My System SpecsSystem Spec
.
27 Sep 2014   #2
DruidicWytch

Windows 8 Pro x64
 
 

Also Windows update only shows the IE 10 update not IE 11 even though 10 is fully installed and updated. Attached is the CBS folder.
My System SpecsSystem Spec
27 Sep 2014   #3
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi and welcome to SevenForums,
Have you tried an alternative installer ?
Download Internet Explorer 11 (Offline installer) - Internet Explorer

You can also try going to msn.com or Bing.com and with a minute or so you'll probably see a Update your browser notification on the top of the page,
Try and use it,
Cheers.
My System SpecsSystem Spec
.

28 Sep 2014   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Your CheckSUR results show considerable problems....
Code:
Summary:
Seconds executed: 4863
 Found 287 errors
  CSI Missing Deployment Key Total count: 1
  CSI Missing Winning Component Key Total count: 286
It's not practical to attempt to fix this many of this type of error - there are too many variables involved.

The vast majority (if not all) of the problems related to IE10 - so it would be best to remove that completely and start again.
Follow the instructions here http://blogs.msdn.com/b/askie/archiv...-explorer.aspx to uninstall IE10 (don't restart until the Command Line tells you to and/or the command prompt returns).

Once complete, run SFC and CheckSUR again, and we'll see how that went.
My System SpecsSystem Spec
28 Sep 2014   #5
DruidicWytch

Windows 8 Pro x64
 
 

it comes back with an error "Error: files of type "Microsoft-Windows-InternetExplorer-*10.*.mum" not found."
My System SpecsSystem Spec
28 Sep 2014   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That's OK - accept the errors and carry on.
My System SpecsSystem Spec
28 Sep 2014   #7
DruidicWytch

Windows 8 Pro x64
 
 

no option to accept, it immediately went back to prompt
My System SpecsSystem Spec
28 Sep 2014   #8
DruidicWytch

Windows 8 Pro x64
 
 

still running sfc and checksur again though, will post results shortly
My System SpecsSystem Spec
28 Sep 2014   #9
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I wonder if we can get around that?

Let's try this...


I've uploaded a file - ddwaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\ddwaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\ddwaa
or
DIR E:\ddwaa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\ddwaa <drive>:\windows\servicing\Packages /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
28 Sep 2014   #10
DruidicWytch

Windows 8 Pro x64
 
 

New CBS
My System SpecsSystem Spec
Reply

 IE 11 Windows Update error 9C48 with Windows 7 SP1 x64




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update IE11 Error 9C48; KB2871997 Always Redected
A couple of months ago this system had problems with KB2918614, which, when installed, would cause all MSI files to fail to install. In the process of fixing that, I used System Restore several times to roll back to different points. After I discovered it was KB2918614 and uninstalled it,...
Windows Updates & Activation
Windows Update Error Code 9C48
I get this error trying to install "Internet Explorer 11 for Windows 7 for x64-based Systems" I already have IE 11 installed and running properly, so I know it's stuck somewhere. I followed the Windows Update Posting Instructions post before starting this thread, so I have run the System...
Windows Updates & Activation
IE11 error code 9C48 through Windows Update
Hello everyone. It's been a while... :) I finally changed my laptop 'cause its GPU got burnt and they gave me a brand new Lenovo Z710 i3-4000m with a GT 745M (not bad). Anyhow, while updating after a new installation of Windows, every single one update got installed successfully except one...
Windows Updates & Activation
Windows update for Internet Explorer 11: 9C48 error
Hello all, First of all thanks a lot for this forum and its helpful and devoted members. So here I am, with the terrible "9C48 code: windows update has encountered an unknown error" (sorry for the approximate translation...). The update I'm trying to install is "Internet Explorer 11 for...
Windows Updates & Activation
Windows Update Error 800B0100 and 9C48
While trying to perform windows updates on my laptop I received 800B0100 and 9C48 error codes. I have attached the CBS log. Please help me.
Windows Updates & Activation
Windows update error 9C48, Internet Explorer update.
Hello. It all started couple of days ago when I wansn't able to start my Skype, because at the login window Skype uses Internet Explorer:( I've been trying couple of days to do something. At first I was getting internet explorer 10 update error, but somehow, magically, that update installed, but...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App