Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Update Error Code 800F0900- Can not get updates

20 Oct 2014   #1
Debi1214

Windows 7 Home x64
 
 
Windows 7 Update Error Code 800F0900- Can not get updates

Hi, thank you for the time to read. First I like to ask be patient with me as I am not major computer savvy.
I have did as the post stated and gotten the Windows Tool and run and installed. Problem still there, no updates will happen. This seem to start after 9/2014 updates came out. Windows fails to update: Error Code 800F0900

Attaching my CB log as stated.
I hope I have did all that is required to get started in hopes to fix this issue.


Windows 7 Home Edition, Internet Explorer

(it is now 1am for me, so will be checking back on this tomorrow)

Thank you kindly


My System SpecsSystem Spec
.
21 Oct 2014   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

There are errors which SFC cannot fix present - you need to run the CheckSUR tool, and post the full logs -

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)
My System SpecsSystem Spec
21 Oct 2014   #3
Debi1214

Windows 7 Home x64
 
 

Hi, thanks for getting back. Sorry I did that incorrectly. I hope this is what is needed.
Have to go out a few hrs. will check back soon.
Thank you again.
My System SpecsSystem Spec
.

21 Oct 2014   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the CheckSUR error-list
Code:
Unavailable repair files:
 winsxs\manifests\amd64_microsoft-windows-r..ce-winip-deployment_31bf3856ad364e35_7.1.7601.16398_none_a45ae49daf20e948.manifest
 winsxs\manifests\amd64_tsusbhubfilter.inf_31bf3856ad364e35_7.1.7601.16398_none_68892afee5e71e34.manifest
 winsxs\manifests\amd64_win7-microsoft-wind..oyment-languagepack_31bf3856ad364e35_7.1.7601.16492_es-es_348e5c5ca222536e.manifest
 winsxs\manifests\amd64_microsoft-windows-r..nt-winip-deployment_31bf3856ad364e35_7.1.7601.16398_none_9d0ac8b0d7328f16.manifest
 winsxs\manifests\amd64_microsoft-windows-u..oyment-languagepack_31bf3856ad364e35_7.1.7601.16492_es-es_71e48077addd87fd.manifest
 winsxs\manifests\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_7.1.7601.16398_none_8990d94eb5ecd1da.manifest
 servicing\packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256.mum
 servicing\packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~amd64~~7.6.7600.256.mum
 servicing\packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256.cat
 servicing\packages\WUClient-SelfUpdate-Aux~31bf3856ad364e35~amd64~~7.6.7600.256.cat
I'll post a fix protocol later for those, and then we'll work on the file problems that SFC identified
My System SpecsSystem Spec
21 Oct 2014   #5
Debi1214

Windows 7 Home x64
 
 

Thank you very much Noel.. will await your reply.
My System SpecsSystem Spec
21 Oct 2014   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - db4aa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder db4aa in the same place.
Open this folder - there should be two folders inside it (Manifests, and Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
My System SpecsSystem Spec
21 Oct 2014   #7
Debi1214

Windows 7 Home x64
 
 

Hi Noel and again thank you. Hopes I did this correctly here is the new file .zip after running CheckSur and adding the folders you gave me. Awaits with fingers crossed


UPDATED: After this was installed windows started doing updates. Of course I didn't stop it. Many updates did finish. One thing I noticed when the pc rebooted a few times during the process was the Disk Verify is yellow.. it wasn't before this. Its hard to read but its as the windows screen loads it says Verify which was always green. Now its yellow, which is telling me a issue?

Waits your reply as well for the other corrupted files in that first log. Thank you Noel
My System SpecsSystem Spec
22 Oct 2014   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Disk Verify?? from which application??

Please run SFC /SCANNOW again - CheckSUR is telling us that there are still file problems, and SFC is generally the best for dealing with these.
My System SpecsSystem Spec
22 Oct 2014   #9
Debi1214

Windows 7 Home x64
 
 

Well unsure Noel what happen here, now my RAID is coming back with unknown issues and a degraded volume message. Should I still run SFC /scannow with this message?
My System SpecsSystem Spec
22 Oct 2014   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Ouch - I know next to nothing about RAID.
Since RAID is lower-level than the OS, I would suspect that it should be dealt with first, or anything we do couldmake things worse.
Let me know if you need assistance with that, and I'll shout for help!
My System SpecsSystem Spec
Reply

 Windows 7 Update Error Code 800F0900- Can not get updates




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update failed error code: 800F0900
Hoping someone can help me here. I have seen Noel DP post several resolutions but each seem custom to the errors the other user gets. I ran SFC/Scannow with no errors. Ran Checksur and got errors. Unavailable repair files:...
Windows Updates & Activation
Windows update error code 800F0900, logs attached (CBS and checksur)
Hello All, Before reinstalling Windows (on my 6 months old new laptop) I ask please for help. I see these issues for the last months (Windows update was fine, Snipping tool stopped working and then I discovered the CBS logs) and I hope no other (office files in example) files will be damaged. ...
Windows Updates & Activation
Windows Update failed error code: 800F0900
Hi, I have encountered error code 800F0900 with the recent Windows Update process. The followings are my screen shots and CBS logs for your perusal. Thanks for taking time to solve my problem. Regards. STLai
Windows Updates & Activation
Windows Update Update KB2887535 code 800F0900 corrupt files ?
Hello, Windows 7 Ultimate x64 SP1 with Windows Updates set to download but no install yet, since many tools start at startup. However our friends decided to install Windows Update Agent 7.6.7600.320 without asking. This caused a full hang of the system, including frozen mousepointer....
Windows Updates & Activation
Windows Update Error Code 800F0900
I keep getting this code when I attempt to search for new updates see attached. I downloaded the SURT and it installed Hotfix for Windows (KB947821) Successfully. A tech with microsoft had me run the stand alone updater and everytime Windows tries to install the updates most all of them fail. See...
Windows Updates & Activation
Windows Update - Code 643 Error with Net Framework 4 Updates (x64)
Hi, I am having repeated problems updating three Net Framework 4 security updates the last month or so. I have followed the four steps in the 'Windows Update Posting Instructions' thread and I have attached the results. Hopefully someone can help.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App