Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 trying to install IE 10 & 11 by Windows update, error 9C59

21 Oct 2014   #1
Kandilo

Windows 7 Professional SP1 32bit
 
 
Windows 7 trying to install IE 10 & 11 by Windows update, error 9C59

Hi, folks
for some time my windows 7 x64 professional is trying to update itself with IE 10 and 11 but everytime ends up with an error 9C59. I tried everything with Microsoft fixit, System update readiness tool & system repair with no success because the system tryed many times, persistently to install the updates and ended with disk checking for errors and no results at all. Also, last week I had a problem with the installation of my KAV 2014 (Kaspersky) which is by the way licenced - it said that there was a problem with licence, corrupt one and by advice of a friend I tried to reinstall the program but it ended with a message - you already have another installation on the computer. So, I tried to uninstall it first and to reinstall again but allthough I don't have the application now in program files it says me that I cannot install the program cause I allready have it installed. I don't understand. Please, help !
here is the CBS file from this computer !


My System SpecsSystem Spec
.
21 Oct 2014   #2
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

A common problem with AV. An AV is scattered throughout the computer. To remove try the removal tool
Service articles
Start by making a System Restore point just in case.
My System SpecsSystem Spec
22 Oct 2014   #3
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Very few AV's give serious problems with installation of updates - it it's quite often a temporary problem.

Here the problem is almost certainly NOTHING to do with the AV in use.

The problem is with system corruption.

CheckSUR shows the following problems...
Code:
Unavailable repair files:
 winsxs\manifests\x86_microsoft-windows-i..timezones.resources_31bf3856ad364e35_6.1.7601.21855_el-gr_858174c0f97d1ea7.manifest
 winsxs\manifests\x86_microsoft-windows-printing-xpsprint_31bf3856ad364e35_6.1.7601.17578_none_ad6daeb56fba755d.manifest
 winsxs\manifests\x86_microsoft-windows-printing-xpsprint_31bf3856ad364e35_6.1.7600.20923_none_ac41fe8a8b8d9bfa.manifest
 winsxs\manifests\amd64_microsoft-windows-printing-xpsprint_31bf3856ad364e35_6.1.7601.21682_none_0a05155c41430a44.manifest
 winsxs\manifests\amd64_netfx-aspnet_wp_exe_b03f5f7f11d50a3a_6.1.7600.20804_none_3aed5b964dc79b9e.manifest
 winsxs\manifests\amd64_f1437b1cd6f4cef525c97129653ee17b_31bf3856ad364e35_6.1.7601.21855_none_78a67ffa9b58eac1.manifest
 winsxs\manifests\amd64_netfx-aspnet_wp_exe_b03f5f7f11d50a3a_6.1.7600.16677_none_51c1c028341a398b.manifest
 servicing\packages\Package_177_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.mum
 servicing\packages\Package_178_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.mum
 servicing\packages\Package_179_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.mum
 servicing\packages\Package_180_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.mum
 servicing\packages\Package_2_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.mum
 servicing\packages\Package_for_KB2443685~31bf3856ad364e35~amd64~~6.1.1.0.mum
 servicing\packages\Package_for_KB2446709_RTM~31bf3856ad364e35~amd64~~6.1.1.2.mum
 servicing\packages\Package_for_KB2478661_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum
 servicing\packages\Package_177_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.cat
 servicing\packages\Package_178_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.cat
 servicing\packages\Package_179_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.cat
 servicing\packages\Package_180_for_KB2633952~31bf3856ad364e35~amd64~~6.1.1.0.cat
 servicing\packages\Package_2_for_KB2454826~31bf3856ad364e35~amd64~~6.1.2.0.cat
 servicing\packages\Package_for_KB2443685~31bf3856ad364e35~amd64~~6.1.1.0.cat
 servicing\packages\Package_for_KB2446709_RTM~31bf3856ad364e35~amd64~~6.1.1.2.cat
 servicing\packages\Package_for_KB2478661_RTM~31bf3856ad364e35~amd64~~6.1.1.0.cat

HOWEVER - the CheckSUR log itself is corrupted!

This almost certainly means that there is a hardware problem - probably with RAM

I suggest running a memory test using MemTest86++ http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run at least 3 passes and post the results.

If it passes OK, then we'll take another look at the results.
My System SpecsSystem Spec
.

23 Oct 2014   #4
Kandilo

Windows 7 Professional SP1 32bit
 
 
Reply to Noel DP !

I did the memory test with Mem86++ 4.10 today and I did it also with Windows memory diagnostic tool but neither the first nor the second found anything. There were no errors at all. I did the test for three passes.
I attached the DAT file to the message, but something else's bothering me. I've bought a new Canon printer 2 days ago and tried to install it on this computer for several times but with no success - it keeped telling me that the printer was not recognized or the USB connection wasn't made. On the contrary, I checked the USB cables & connectiones and they were O.K.; I tried to install another printer - Xerox but again I didn't succeed.
I'm almost sure that this has something to do with the problems with windows update. I don't know what to do ,please help - give me some advice ! I need to use printer in my everyday work !
My System SpecsSystem Spec
24 Oct 2014   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I need to see your event logs - this could be due to other hardware problems such as a bad PSU, or even a failing CPU.


Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.
My System SpecsSystem Spec
24 Oct 2014   #6
Kandilo

Windows 7 Professional SP1 32bit
 
 
Reply to NoelDP !

Hi,
here are the files that you've asked for !
Thumbs up !
My System SpecsSystem Spec
24 Oct 2014   #7
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Found it

It looks as if your hard drive may be failing.
Back up your data to external media NOW - once you've done that, then run a full CHKDSK...

Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.
At the Command prompt, type
CHKDSK C: /R
and hit the Enter key.
You will be told that the drive is locked, and the CHKDSK will run at the next boot - hit the Y key, and then reboot.
The CHKDSK will take a few hours depending on the size of the drive, so be patient!
After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) -

Then post the new Application even log.
My System SpecsSystem Spec
25 Oct 2014   #8
Kandilo

Windows 7 Professional SP1 32bit
 
 
Reply to NoelDP !

Hello,
I'm attaching the files that you've serching for !
waiting for another advice...
My System SpecsSystem Spec
26 Oct 2014   #9
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You have a definite problem witht the hard drive -
Quote:
80 KB in bad sectors.
That means that you have 20 bad sectors, and indicates that your drive is failing - and at an increasing rate, too

You need to plan for either a replacement hard drive, or a replacement computer
My System SpecsSystem Spec
26 Oct 2014   #10
Kandilo

Windows 7 Professional SP1 32bit
 
 
Reply to NoelDP !

That's terrible news, but anyway thanks.
thank you for the great efforts that you've made to help me but obviously I'll need to replace the computer with a new one.
You've been a great help ! Greetings...
My System SpecsSystem Spec
Reply

 Windows 7 trying to install IE 10 & 11 by Windows update, error 9C59




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update Error 80070308 and 9C59
Just recently, I've been receiving error codes 80070308 along with error 9C59 when attempting to perform Windows Update. I'm not entirely too sure when this problem began since last months updates installed successfully and I haven't been able to install any updates since then. Attached is the most...
Windows Updates & Activation
9C59 error when trying to update/install IE 11
I have been having this error for quite some time now and have been reading forums about the issue all over the internet. I can't seem to find what I am looking for or what I am reading for a solution is "over my head" so I thought I would post a topic about it. Here is a copy of my IE11_main.log....
Windows Updates & Activation
How fix windows update error codes 80070BC9 and 9C59 Windows 7
My computer will not not update I have tried all the error fix programs and still have problem. Error codes 80070BC9 and 9C59. Thank you for any help you can give attached is my cbs file. Thank you Mark
Windows Updates & Activation
Windows 7 32bit cannot install IE10 or IE11: Windows Update error 9C59
I am having an issue that it looks like many other have run into trying to upgrade from IE8/9 to 10 or 11. Other Windows Updates go through fine but anytime I try to install IE 10 or 11 via Windows Update or from the offline installer it fails with the error 9C59. A little backstory on this...
Windows Updates & Activation
Can't install IE 10 or 11 from win update, error 9C59
Hi I really hope you can help me. I can't install internet explorer 10 or 11 from windows update. It comes with "update failured code 9C59.I have tried to fix it with windows fixit and other things, but nothing helps. I have also tried to make sfc scan but nothing helps. I have attached...
Windows Updates & Activation
Error 9C59 when using Windows Update to install IE10
Hey, I have been experiencing a 9C59 error when trying to update to IE10 on this PC. I have followed all of the troubleshooting advice available from Microsoft, ensuring all pre-requisites are installed etc. I have attached three CBS.zip files here for evaluation (sorry had to split them to...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App