Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Tried to install Service Pack 1, now I'm getting various errors

17 Dec 2014   #21
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Open an ElevatedCommand Prompt, and run the following command

NETSH winsock reset

- you'll be advised to reboot.
Do so, and then try Windows update again


My System SpecsSystem Spec
.
17 Dec 2014   #22
rskfx

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Open an ElevatedCommand Prompt, and run the following command

NETSH winsock reset

- you'll be advised to reboot.
Do so, and then try Windows update again
I did two things and I'm not sure what one it was. I came across a thread of someone you were helping and I put in the commands you told the one person to do like REG LOAD, and I also decided to try turning off Windows Firewall. When I went back to Windows Update it said that I needed to update and install the newer version of Windows Update before I could install anything else. It currently is "Downloading and Installing Updates".
My System SpecsSystem Spec
17 Dec 2014   #23
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You really need to keep your Firewall up - if necessary, reset it to default.
My System SpecsSystem Spec
.

17 Dec 2014   #24
rskfx

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by NoelDP View Post
You really need to keep your Firewall up - if necessary, reset it to default.
Is it all right to keep it off just while this runs? It finished looking for Windows Update updates and is now looking for normal updates and has been for at least 10 minutes now so I am hopeful about this and don't want to mess it up.
My System SpecsSystem Spec
17 Dec 2014   #25
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

it should be OK - but don't do any surfing, or you could find yourself getting infected in two minutes flat!
My System SpecsSystem Spec
17 Dec 2014   #26
rskfx

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by NoelDP View Post
it should be OK - but don't do any surfing, or you could find yourself getting infected in two minutes flat!
It worked! It is showing that I have 52 updates that I can install, 8 important and 44 optional. Should I download all of the important ones? This updater has been turned off since I bought the computer so I assume I probably should.
My System SpecsSystem Spec
17 Dec 2014   #27
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Yes, definitely!
My System SpecsSystem Spec
17 Dec 2014   #28
rskfx

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Yes, definitely!
It apparently installed the updates but it seems there was some error cause Service Pack 1 still isn't showing and I seriously need it, I'm getting the 80072EFE error again, and in the list of installed updates there is one that can't be uninstalled that is KB2533552. All that installed were security and Windows updates.

I tried the NETSH command you said and rebooted but it didn't fix it.
My System SpecsSystem Spec
17 Dec 2014   #29
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

OK - please open an Elevated Command Pompt and run the following command...

IPCONFIG /ALL

Post the results...


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
17 Dec 2014   #30
rskfx

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by NoelDP View Post
OK - please open an Elevated Command Pompt and run the following command...

IPCONFIG /ALL

Post the results...


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\USER>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : USER-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Conexión de área local 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Windows Adapter V9
Physical Address. . . . . . . . . : 00-FF-F2-66-C3-E4
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f5a1:cecd:965b:57f0%17(Preferred)
IPv4 Address. . . . . . . . . . . : 169.254.123.153(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 436273138
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-15-6B-19-1C-65-9D-D3-93-A9

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled

Wireless LAN adapter Conexión de red inalámbrica 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-24-D2-49-EA-1B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1c08:89d4:5b31:e49f%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, December 17, 2014 1:46:22 PM
Lease Expires . . . . . . . . . . : Thursday, December 18, 2014 1:46:22 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 268444882
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-15-6B-19-1C-65-9D-D3-93-A9

DNS Servers . . . . . . . . . . . : 190.114.250.34
190.114.251.2
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Conexión de área local 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : 00-1E-33-AC-8E-95
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
My System SpecsSystem Spec
Reply

 Tried to install Service Pack 1, now I'm getting various errors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Service Pack 1 won't install
I have tried to install SP1 on my laptop every time Windows update lists it to download, it fails. Other updates install as expected. Curiously, I have Windows 7 on a desktop system and it installed just fine. Is there a way to get this update in an ISO file and install it manually? Thank...
Windows Updates & Activation
Factory Windows 7 Service pack 1 but service pack shows in updates?
Just bought new never used factory fresh PC Acer AXC-605-UR29 Windows 7 Service Pack 1 manufacrtured this year, I checked for latest updates and sure enough Service Pack 1 shows up in updates Windows 7 Service Pack 1 for x64-based Systems (KB976932) Download size: 9.1 MB
Windows Updates & Activation
Can't (re)install Service Pack 1
I'm havin' a bit of trouble installing Service Pack 1. Either that or Windows Update wants to make an excuse and stop the installation halfway and then spit out a random error code. Failed - Error Code 8024200D Would downloading the MSU file help resolve what's halting the update process?
Windows Updates & Activation
Service Pack 1 won't install
I am working on a PC with Windows 7 Ultimate. The owner has told me that a friend upgraded her from Vista to 7. There is an OEM activation key listed under system configuration. How do I know it is genuine? The reason I ask is because SP1 dowloads from Microsoft site but fails to install:...
Windows Updates & Activation
Service Pack 1 won't install.....
Every time I go to run the windows upgrade program and I begin installing it on my laptop I get to a point it comes up with a screen warning that my laptop is low on power, even thought its at full power and plugged into the ac, and won't let me go on any further. Does anyone out there have...
Windows Updates & Activation
Service Pack 1 won't install
I have tried several times to get it to install on one of my W7 machines. First I tried getting it from Microsoft Update. When that didn't work, I downloaded the ISO file and burned a DVD. That installation worked fine on my secondary computer running an AMD processor. But this one, an Intel...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App