Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repeated windows update; no error message

02 Jan 2015   #1
fay

windows 7 ultimate
 
 
Repeated windows update; no error message

I am having a problem with one certain windows update:

Security Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-based Systems

It has installed at least 30 times. Right after I install it, it pops right back up to install again. Why does it keep doing that if it installed successfully? Is it bad that it installed that many times? I don't understand. Will you help me please?
Thank you
Fay

There are no error messages with the windows updates.
I tried to upload the CBS.log but i keep getting this error message:
Server Error


500 - Internal server error.

There is a problem with the resource you are looking for, and it cannot be displayed.



How do I get the file to you?


My System SpecsSystem Spec
.
03 Jan 2015   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The 500 error when attempting to upload is almost always because the file you're attempting to upload is too large - strip out the CBSPersist files until the resulting file is less than 8MB, then try again.

Make sure that you follow these instructions,...

Please follow the Windows Update Posting Instructions and post the requested data
My System SpecsSystem Spec
03 Jan 2015   #3
fay

windows 7 ultimate
 
 

Is this better?
My System SpecsSystem Spec
.

04 Jan 2015   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Great!
CheckSUR found and fixed one problem.

SFC found a problem - but was unable to fix it.
Code:
 Line 68657: 2015-01-02 14:43:18, Info                  CSI    0000036d [SR] Repairing 4 components
 Line 68658: 2015-01-02 14:43:18, Info                  CSI    0000036e [SR] Beginning Verify and Repair transaction
 Line 68661: 2015-01-02 14:43:26, Info                  CSI    00000370 [SR] Cannot repair member file [l:24{12}]"korwbrkr.lex" of Microsoft-Windows-WordbreakerStemmer-Korean, Version = 7.0.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 68664: 2015-01-02 14:43:26, Info                  CSI    00000372 [SR] Cannot repair member file [l:24{12}]"korwbrkr.lex" of Microsoft-Windows-WordbreakerStemmer-Korean, Version = 7.0.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 68665: 2015-01-02 14:43:26, Info                  CSI    00000373 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"

We'll have to fix this manually...

I've uploaded a file - fayaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\fayaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\fayaa
or
DIR E:\fayaa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\fayaa <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
04 Jan 2015   #5
fay

windows 7 ultimate
 
 

I was just wondering; the files that can't be repaired from the SFC scan, I noticed it said Korean beside it. Do I even need those?
My System SpecsSystem Spec
05 Jan 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Probably not - but they are part of the original installation and should still be present. It's actually a kind of spell-checker for Korean, for use by all browsers, and anything else that may come into contact with foreign documents..
My System SpecsSystem Spec
05 Jan 2015   #7
fay

windows 7 ultimate
 
 

OK. Here is the new CBS log
My System SpecsSystem Spec
06 Jan 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Great - SFC is happy with that now.

Code:
2015-01-05 11:37:19, Info                  CSI    0000035f [SR] Repairing 3 components
2015-01-05 11:37:19, Info                  CSI    00000360 [SR] Beginning Verify and Repair transaction
2015-01-05 11:37:21, Info                  CSI    00000361 Repair results created:
POQ 148 starts:
 
POQ 148 ends.
2015-01-05 11:37:21, Info                  CSI    00000362 [SR] Repair complete
I'm a little confused about the 3 components it says it's repairing, since none show in the report.
Please attempt the update again - if it fails, post the C:\Windows\windowsupdate.log file
My System SpecsSystem Spec
06 Jan 2015   #9
fay

windows 7 ultimate
 
 

I tried the update again and this is what happened.
My System SpecsSystem Spec
07 Jan 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The 80240016 error implies that Windows thinks there is another install going on.
See this article.
Windows Update error 80240016 - Microsoft Windows Help
My System SpecsSystem Spec
Reply

 Repeated windows update; no error message




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 Home Premium SP1 - repeated update error 0x80073712
Hey all, I have a lenovo tower running windows 7 home premium service pack 1, all seems to be working great except when I go to do updates, every update is installed except this one nagging one that fails repeatedly. The Update is Security Update KB2847927 and the error code is 0x80073712 ...
Windows Updates & Activation
Repeated Windows Update failures (KB954430 & KB973688) Error Code 643
I recently completed a clean install of Window 7 Home Premium and have been running Windows updates to get up to date. There are two updates (KB954430 & KB973688) that fail to install repeatedly. I'd appreciate any advice on how to clear this up. The update history details for each of the...
Windows Updates & Activation
Windows Update Error Message: 8024402c - Tried multiple solutions
Dear Windows Seven Forums, I try to resolve my own issues and normally do. However, this error message has gotten the better of me so far. Have tried various solutions posted about this error message, from registry to firewall. None work so far. I have enclosed the notepad containing the...
Windows Updates & Activation
windows 7 update error message
I get windows update 8007273d "windows update dt000" error message when i try to get updates. I have windows 7 professsional.
Windows Updates & Activation
Repeated Failure to Update Error 80070020
Hi, I'm running Windows 7 Home Premium 32bit. Windows Security Essentials for antivirus and Windows firewall as my firewall. For a few months now Windows has failed on the automatic updates. The updates are: Security Update for Windows 7 (KB2556532) Security Update for Windows 7 (KB2532531)...
Windows Updates & Activation
Error message for windows update
windows 7 has just said to me when i just resently tryed to update was this WindowsUpdate_800700C1" "WindowsUpdate_dt000 any help would be great my specs Hardware Diagnostic Tools: System Information December-02-10 6:15:31 PM
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App