Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 x86 update problem 80070643 and 80071A91 errors

25 Jan 2015   #11
ArtoPower

Windows 7 Ultimate x86
 
 

Quote   Quote: Originally Posted by NoelDP View Post
I've uploaded a file - arpab.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\arpab
hit the enter key - if you get a 'Not Found' error try
DIR D:\arpab
or
DIR E:\arpab



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\arpab <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
I did everything that you have written!


My System SpecsSystem Spec
.
25 Jan 2015   #12
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Still one error present
Code:
 Line 2138: 2015-01-25 17:59:04, Info                  CSI    000001f7 [SR] Repairing 1 components
 Line 2139: 2015-01-25 17:59:04, Info                  CSI    000001f8 [SR] Beginning Verify and Repair transaction
 Line 2140: 2015-01-25 17:59:04, Info                  CSI    000001f9 [SR] Cannot repair member file [l:16{8}]"qdvd.dll" of Microsoft-Windows-DirectShow-DVDSupport, Version = 6.1.7601.18611, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 2141: 2015-01-25 17:59:04, Info                  CSI    000001fa [SR] Cannot repair member file [l:16{8}]"qdvd.dll" of Microsoft-Windows-DirectShow-DVDSupport, Version = 6.1.7601.18611, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 2142: 2015-01-25 17:59:04, Info                  CSI    000001fb [SR] This component was referenced by [l:150{75}]"Package_1_for_KB3001554~31bf3856ad364e35~x86~~6.1.1.1.3001554-2_neutral_GDR"
 Line 2147: 2015-01-25 17:59:04, Info                  CSI    000001fd [SR] Repair complete
Before I go off on a tangent, please run the CheckSUR tool again, and post the new CheckSUR.log file
My System SpecsSystem Spec
25 Jan 2015   #13
ArtoPower

Windows 7 Ultimate x86
 
 

check please


Attached Files
File Type: rar logs.rar (1.6 KB, 1 views)
My System SpecsSystem Spec
.

25 Jan 2015   #14
ArtoPower

Windows 7 Ultimate x86
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Still one error present
Code:
 Line 2138: 2015-01-25 17:59:04, Info                  CSI    000001f7 [SR] Repairing 1 components
 Line 2139: 2015-01-25 17:59:04, Info                  CSI    000001f8 [SR] Beginning Verify and Repair transaction
 Line 2140: 2015-01-25 17:59:04, Info                  CSI    000001f9 [SR] Cannot repair member file [l:16{8}]"qdvd.dll" of Microsoft-Windows-DirectShow-DVDSupport, Version = 6.1.7601.18611, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 2141: 2015-01-25 17:59:04, Info                  CSI    000001fa [SR] Cannot repair member file [l:16{8}]"qdvd.dll" of Microsoft-Windows-DirectShow-DVDSupport, Version = 6.1.7601.18611, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 2142: 2015-01-25 17:59:04, Info                  CSI    000001fb [SR] This component was referenced by [l:150{75}]"Package_1_for_KB3001554~31bf3856ad364e35~x86~~6.1.1.1.3001554-2_neutral_GDR"
 Line 2147: 2015-01-25 17:59:04, Info                  CSI    000001fd [SR] Repair complete
Before I go off on a tangent, please run the CheckSUR tool again, and post the new CheckSUR.log file
This component was referenced by [l:150{75}]"Package_1_for_KB3001554
What if i remove this update KB3001554 ?
My System SpecsSystem Spec
26 Jan 2015   #15
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

No - That's exactly what may make the problem worse.

It looks like the substitution didn't work properly, so we have to figure out what went wrong...

Please open an Elevated Command Prompt, and run the following commands...

DIR C:\arpab
DIR C:\Windows\winsxs\arpab

post the results.
My System SpecsSystem Spec
26 Jan 2015   #16
ArtoPower

Windows 7 Ultimate x86
 
 

Quote   Quote: Originally Posted by NoelDP View Post
No - That's exactly what may make the problem worse.

It looks like the substitution didn't work properly, so we have to figure out what went wrong...

Please open an Elevated Command Prompt, and run the following commands...

DIR C:\arpab
DIR C:\Windows\winsxs\arpab

post the results.
volume in device C have no tag
s/n of volume : 78E2-2283

contents of a folder C:\windows\winsxs

file ont found .

I translate this from russia language.


Attached Thumbnails
Windows 7 x86 update problem 80070643 and 80071A91 errors-cmd.jpg  
My System SpecsSystem Spec
26 Jan 2015   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

My fault - I should have given you the detailed instructions....

Please try the two commands again


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
26 Jan 2015   #18
ArtoPower

Windows 7 Ultimate x86
 
 

Quote   Quote: Originally Posted by NoelDP View Post
My fault - I should have given you the detailed instructions....

Please try the two commands again


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight select Copy. In the CP Window, click on the black/white icon at top left select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
it's the same

Microsoft Windows [Version 6.1.7601]
(c) Корпорация Майкрософт (Microsoft Corp.), 2009. Все права защищены.

C:\Windows\system32>DIR C:\arpab
Том в устройстве C не имеет метки.
Серийный номер тома: 78E2-2283

Содержимое папки C:\arpab

25.01.2015 17:36 <DIR> .
25.01.2015 17:36 <DIR> ..
25.01.2015 11:14 <DIR> x86_microsoft-windows-directshow-dvdsupport_
31bf3856ad364e35_6.1.7601.17835_none_5614fae13229f515
25.01.2015 11:14 <DIR> x86_microsoft-windows-directshow-dvdsupport_
31bf3856ad364e35_6.1.7601.18611_none_56267efd321d772a
25.01.2015 11:15 <DIR> x86_microsoft-windows-directshow-dvdsupport_
31bf3856ad364e35_6.1.7601.22819_none_56b81ffe4b33ded3
0 файлов 0 байт
5 папок 106*822*656*000 байт свободно

C:\Windows\system32>DIR C:\Windows\winsxs\arpab
Том в устройстве C не имеет метки.
Серийный номер тома: 78E2-2283

Содержимое папки C:\Windows\winsxs

Файл не найден

C:\Windows\system32>
My System SpecsSystem Spec
26 Jan 2015   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Hmmm - the source files are in the right place (C:\arpab)
but they don't seem to have copied properly to the target folders.

Are you sure you got the command correct while in the Repair Environment (post #10) ? Did you get any error messages? What drive letter did you find/use??
My System SpecsSystem Spec
26 Jan 2015   #20
ArtoPower

Windows 7 Ultimate x86
 
 

it was ok . all files copied. no error .
first time made XCOPY C:/aprab C:/windows/winsxs
was written OK without error
after i tried xcopy c:/arpab D:/windows/winsxs
it was ok too whitout error

but sfc/scannow log was written that can't repair this files
My System SpecsSystem Spec
Reply

 Windows 7 x86 update problem 80070643 and 80071A91 errors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update errors 80070643, 800B0100, and 9C59
Twelve Windows Updates are failing with error codes: 80070643, 800B0100, and 9C59. I've tried several supported Microsoft fixes without success (System Update Readiness Tool, Windows Update troubleshooter, etc.). I noticed it's trying to install IE 9,10, and 11 simultaneously, so I've tried...
Windows Updates & Activation
Windows 7 update 9C59/80070643/80071A91
hello people I cant update my window 7 Professional x86 32 bit with SP1. also cant install IE11 I read old article about my problem and some forum message but no helped me. how can I fix that problem ?
Windows Updates & Activation
Windows update error 80071A91 also 80070643
Toshiba Satellite L755-5350 Win7 Home Premium SP1 4 GB RAM 500 GB Hard drive Toshiba MK5065GS ~390GB free space This is a clients laptop who first noticed that Windows updates on shutdown would fail and restart, revert, restart. This happened on every shutdown after that. Started with this...
Windows Updates & Activation
windows failed updates with Error Codes 80070643, 80071A91 and 78f
I am having this issue for months now, and i keep getting these errors. I have searched and tried different methods from other forums but only one worked for me, unfortunately just once ( flushing of the software distribution) but after the next day, when my pc was having its automatic update, it...
Windows Updates & Activation
windows updates, error code 80071a91, 80070643, 9c47
keep on getting this error anytime i want to update on windows 7. have a log here
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App