Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Readiness Update not installing.

17 Feb 2015   #21
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please open an Elevated COmmand prompt and run the following command

REG QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

Post the results.


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.


My System SpecsSystem Spec
.
17 Feb 2015   #22
Authenticity

Windows 7 Home Premium 64 bit.
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Please open an Elevated COmmand prompt and run the following command

REG QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

Post the results.


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight select Copy. In the CP Window, click on the black/white icon at top left select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
I dont know if the numbers that started with 192... is stuff that shouldnt be leaked online or whatever so i replaced it with [??]

heres what i got.

Quote:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>REG QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic
es\Tcpip\Parameters

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
ICSDomain REG_SZ mshome.net
SyncDomainWithMembership REG_DWORD 0x1
NV Hostname REG_SZ Huseinovic
DataBasePath REG_EXPAND_SZ %SystemRoot%\System32\drivers\etc
NameServer REG_SZ
ForwardBroadcasts REG_DWORD 0x0
IPEnableRouter REG_DWORD 0x0
Domain REG_SZ
Hostname REG_SZ Huseinovic
SearchList REG_SZ
UseDomainNameDevolution REG_DWORD 0x1
EnableICMPRedirect REG_DWORD 0x1
DeadGWDetectDefault REG_DWORD 0x1
DontAddDefaultGatewayDefault REG_DWORD 0x0
QualifyingDestinationThreshold REG_DWORD 0x3
EnableIPAutoConfigurationLimits REG_DWORD 0x1
ArpCacheLife REG_DWORD 0x708
ArpCacheMinReferencedLife REG_DWORD 0xe10
ArpCacheSize REG_DWORD 0xc8
DisableTaskOffload REG_DWORD 0x1
EnablePMTUBHDetect REG_DWORD 0x1
EnablePMTUDiscovery REG_DWORD 0x1
GlobalMaxTcpWindowSize REG_DWORD 0x3cf3c
SynAttackProtect REG_DWORD 0x1
Tcp1323Opts REG_DWORD 0x1
TcpFinWait2Delay REG_DWORD 0x1e
TcpTimedWaitDelay REG_DWORD 0x1e
EnableWsd REG_DWORD 0x1
DhcpNameServer REG_SZ [??]
DhcpDomain REG_SZ home

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Adapters
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DNSRegiste
redAdapters
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Persistent
Routes
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Winsock

C:\Windows\system32>
My System SpecsSystem Spec
17 Feb 2015   #23
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The 192.168.xxx.xxx numbers are the internal IP addresses on your home network, and useless to anyone outside (unless they also have control access to your router).

It looks to me as if you have a manual configuration of your networking - you may find it beneficial to change it to automatic , and reset the Winsock stack. (there are a lot of entries there that I don't have, and don't understand, either - some may be the result of manual settings, and others may be the result of security software)

What security software are you using? - have you changed it in any way recently??
My System SpecsSystem Spec
.

18 Feb 2015   #24
Authenticity

Windows 7 Home Premium 64 bit.
 
 

Quote   Quote: Originally Posted by NoelDP View Post
The 192.168.xxx.xxx numbers are the internal IP addresses on your home network, and useless to anyone outside (unless they also have control access to your router).

It looks to me as if you have a manual configuration of your networking - you may find it beneficial to change it to automatic , and reset the Winsock stack. (there are a lot of entries there that I don't have, and don't understand, either - some may be the result of manual settings, and others may be the result of security software)

What security software are you using? - have you changed it in any way recently??
How do i change that to auto, and i use Kaspersky Internet Security, ive had it for 4 years never had any problems, its an awesome program!
My System SpecsSystem Spec
20 Feb 2015   #25
Authenticity

Windows 7 Home Premium 64 bit.
 
 

Quote   Quote: Originally Posted by NoelDP View Post
The 192.168.xxx.xxx numbers are the internal IP addresses on your home network, and useless to anyone outside (unless they also have control access to your router).

It looks to me as if you have a manual configuration of your networking - you may find it beneficial to change it to automatic , and reset the Winsock stack. (there are a lot of entries there that I don't have, and don't understand, either - some may be the result of manual settings, and others may be the result of security software)

What security software are you using? - have you changed it in any way recently??
please update me on this. Thank you!
My System SpecsSystem Spec
22 Feb 2015   #26
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

First let's just try resetting the stack...
Open an Elevated Command Prompt and run the following command...

NETSH WINSOCK RESET

you'll be advised that a reboot is required to complete the job - reboot and see if that helps.

If not, then you should try setting the Networking to Auto...

Go to Internet Options
Click on the Connections tab
Click on the LAN settings button
UNtick all boxes and click OK and then OK again to close the Internet Options window.
Now go to Control Panel\Network and Internet\Network Connections
right-click on the Network card in use, and select Properties.

Highlight the 'Internet Protocol Version 4' entry in the Networking tab box, and select Properties.
Note the current values for safekeeping just in case!
click on the 'Obtain an IO address automatically' radio button
click on the 'Obtain DNS Server address automatically' radio button
click OK out and close all windows - reboot and test.
My System SpecsSystem Spec
22 Feb 2015   #27
Authenticity

Windows 7 Home Premium 64 bit.
 
 

Quote   Quote: Originally Posted by NoelDP View Post
First let's just try resetting the stack...
Open an Elevated Command Prompt and run the following command...

NETSH WINSOCK RESET

you'll be advised that a reboot is required to complete the job - reboot and see if that helps.

If not, then you should try setting the Networking to Auto...

Go to Internet Options
Click on the Connections tab
Click on the LAN settings button
UNtick all boxes and click OK and then OK again to close the Internet Options window.
Now go to Control Panel\Network and Internet\Network Connections
right-click on the Network card in use, and select Properties.

Highlight the 'Internet Protocol Version 4' entry in the Networking tab box, and select Properties.
Note the current values for safekeeping just in case!
click on the 'Obtain an IO address automatically' radio button
click on the 'Obtain DNS Server address automatically' radio button
click OK out and close all windows - reboot and test.
NEtworking was already on auto and i resetted the thing and nothing. Theres nothing really left to do right? I think i should backup all my files and restore the comp?
My System SpecsSystem Spec
Reply

 System Readiness Update not installing.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System Update Readiness Tool
I have downloaded and installed the "System Update Readiness Tool". Now how do I run it. I CANNOT find it in "All Program". How the heck do I run it???? :cry::shock::sick:
Windows Updates & Activation
Windows update and system update readiness tool problem.
I have am currently running IE9 and see an error code of 9C59 when installing the update to IE11. The Windows Update Troubleshooter reported the service registeration is missing or corrupt (not fixed), and the Windows updat error 0x80070490(2014-12-12-T-07_49_01P) (not fixed). I then downloaded...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App