Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Update 80070490 and non-KB items in CheckSUR.log

18 Feb 2015   #1
mikewse

Windows 7 x64
 
 
Windows Update 80070490 and non-KB items in CheckSUR.log

Experiencing the 80070490 error on Windows 7 Professional, I have followed the instructions on http://support.microsoft.com/kb/947821 and run the System Update Readiness Tool.

CheckSUR.log contains the following:

Code:
 
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-02-18 18:35
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
(f) CSI Payload File Missing 0x00000000 rasctrs.ini amd64_microsoft-windows-rasctrs.resources_31bf3856ad364e35_6.1.7600.16385_sv-se_013f700a3fef0220 
(f) CSI Payload File Missing 0x00000000 _ServiceModelEndpointPerfCounters.ini amd64_wcf-m_svc_mod_end_perf_ini_31bf3856ad364e35_6.1.7600.16385_none_26b27bcaa70f123f 
(f) CSI Payload File Missing 0x00000000 _ServiceModelEndpointPerfCounters.h amd64_wcf-m_svc_mod_end_perf_h_31bf3856ad364e35_6.1.7600.16385_none_819e8545cdbf46af 
(f) CSI Payload File Corrupt 0x00000000 CbsCore.dll amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5 
Summary:
Seconds executed: 1103
 Found 4 errors
  CSI Payload File Missing Total count: 3
  CSI Payload File Corrupt Total count: 1
The missing/corrupted files are not part of any KB downloads. How can I (re)install the correct packages?
Thanks
Mike


My System SpecsSystem Spec
.
19 Feb 2015   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
My System SpecsSystem Spec
21 Feb 2015   #3
mikewse

Windows 7 x64
 
 

Thanks, and sorry about the omission! I'm now back at the problematic computer after travelling last two days. I have attached CBS.zip (had to remove a few CABs) and the log file.


Attached Files
File Type: log WindowsUpdate.log (1.54 MB, 1 views)
My System SpecsSystem Spec
.

22 Feb 2015   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the error-list from SFC...
Code:
 Line 19571: 2015-02-21 09:46:53, Info                  CSI    00000368 [SR] Repairing 8 components
 Line 19572: 2015-02-21 09:46:53, Info                  CSI    00000369 [SR] Beginning Verify and Repair transaction
 Line 19575: 2015-02-21 09:46:54, Info                  CSI    0000036b [SR] Cannot repair member file [l:24{12}]"atiumd64.dll" of atiilhag.inf, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 19578: 2015-02-21 09:46:54, Info                  CSI    0000036d [SR] Cannot repair member file [l:20{10}]"dfrgui.exe" of Microsoft-Windows-Defrag-AdminUI, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 19581: 2015-02-21 09:46:54, Info                  CSI    0000036f [SR] Cannot repair member file [l:14{7}]"wet.dll" of Microsoft-Windows-MigrationWizardApplication, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 19584: 2015-02-21 09:46:55, Info                  CSI    00000371 [SR] Cannot repair member file [l:26{13}]"netcenter.dll" of Microsoft-Windows-NetworkCenter, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 19585: 2015-02-21 09:46:55, Info                  CSI    00000372 [SR] Cannot repair member file [l:22{11}]"rasctrs.ini" of Microsoft-Windows-Rasctrs.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"sv-SE", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 19586: 2015-02-21 09:46:55, Info                  CSI    00000373 [SR] Cannot repair member file [l:70{35}]"_ServiceModelEndpointPerfCounters.h" of WCF-M_SVC_MOD_END_PERF_H, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 19587: 2015-02-21 09:46:55, Info                  CSI    00000374 [SR] Cannot repair member file [l:74{37}]"_ServiceModelEndpointPerfCounters.ini" of WCF-M_SVC_MOD_END_PERF_INI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 19590: 2015-02-21 09:46:55, Info                  CSI    00000376 [SR] Cannot repair member file [l:48{24}]"FirewallControlPanel.dll" of Networking-MPSSVC, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
As you can see, it's a little different to the one produced by CheckSUR!

I'll post a fix protocol later.
My System SpecsSystem Spec
22 Feb 2015   #5
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - mwsaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\mwsaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\mwsaa
or
DIR E:\mwsaa



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\mwsaa <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
22 Feb 2015   #6
mikewse

Windows 7 x64
 
 

Very interesting, thanks!
All is fine up to the repair login in your guide. This is a domain-joined laptop and I am local admin only when logged in to my domain account, but this account is not available on the repair login screen. Is there any other way I can get into the right kind of command prompt? (safe mode etc)
Best regards
Mike
My System SpecsSystem Spec
22 Feb 2015   #7
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Not really - the only other way to do it would be to give yourself permissions to the folders concerned, copy the files in, then remove the new permissions.
My System SpecsSystem Spec
22 Feb 2015   #8
mikewse

Windows 7 x64
 
 

So if adding the necessary permissions, will it work to perform this copying from a normal or safe mode startup, or is it imperative that the computer is booted in repair mode?
(The repair login shows a dropdown with only account which I think was set up by the person doing the install but who has now left the company)
My System SpecsSystem Spec
22 Feb 2015   #9
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You can do it all in normal mode... plesse mske sutre that you get the permissions right at the end.
My System SpecsSystem Spec
24 Feb 2015   #10
mikewse

Windows 7 x64
 
 

I've been struggling with adding enough permissions to the winsxs folder while trying not to do too much harm. It seems many guides recommend taking ownership of the winsxs folder and subfolders. Do you know if this is needed or is there a leaner way through this? Ideally I would just like to assign some permissions to c:\, c:\windows, c:\windows\winsxs and appropriate subfolders from an elevated command prompt...
My System SpecsSystem Spec
Reply

 Windows Update 80070490 and non-KB items in CheckSUR.log




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update Error 80070490
Hi, First post here. I work with seniors helping them with computer issues and this one is on an HP Desktop WIndows 7 Home Premium 64 bit. I only help him about once a week so any suggestions may not be attempted for a few days. Windows Update gives error 80070490 when trying to install...
Windows Updates & Activation
Windows Update Error 80070490?
Windows Update has a problem on my machine. Most of the updates get installed with no problem. However now and then (more then than now) one or more of them won't install. I have a couple from last year that are still sitting there. Today I ran the rediness tool a couple of times with no change....
Windows Updates & Activation
Windows Update Error 80070490
Hello Running Windows Vista Home Premium 32bit SP2 Been getting this error when I update windows, tried many fixes to no avail including Windows6.0-KB947821-v33-x86.exe MicrosoftFixit.wu.LB.383193783898689.1.1.Run.exe sfc /scannow
Windows Updates & Activation
Error 80070490 when doing Windows Update
Hi there We have an error every time we did the Windows Update for Windows 7 SP1 for x64-based Systems (KB976932). We have the posting instruction as follow: 1. We did the SURT and complete. 2. We also did "sfc /scannow" and no found any errors 3. Error Code: 80070490 - Windows Update...
Windows Updates & Activation
Windows Update Error Code 490 & 80070490
Hi I was wondering if anyone knows how to fix this windows update problem. The pop up message said it was an error code of 80070490, but when I cancel that the main windows update window says Error code 490. Please see the attached cbs folder. Thanks
Windows Updates & Activation
Windows update Error 80070490
I have problem to windows update 80070490, to this KB, 2769369 - 2778344, 2647753. I has tried very methods but unsuccessful. Any help? Any program or ti to fix it? Thank Nikos Tsaptsalis
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App