Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Update repeatedly problem - Error 8007054F, 643, 8024200D

19 Feb 2015   #1
jyck

Windows 8.1
 
 
Windows Update repeatedly problem - Error 8007054F, 643, 8024200D

Hi all,

since some time ago Ive been unable to proceed with any installation from Windows Update as I get always error not in the installation but when after reboot the changes are applied (Windows reverts changes) The errors that I get are the following errors: 8007054F, 643, 8024200D.

Ive tried with Microsoft Fix tool and some other alternative from Microsoft Support site, like reset and re-activate Windows Update resources, but not success at all and always the same negative result.

Attached you can find the CBS.log file after running Microsoft Readiness Tool, sorry for the file size (~170MB) the error that is repeated more often is the 0x80070005, E_ACCESSDENIED.

Also I have another issue that prevents tools like Microsoft Lync to connect to the internet, windows network connection indicates that there is no internet (red cross when I click over the network icon in the toolbar) however I can navigate the Internet and connect to other computers in the local network. I dont know if this is related, but can give you more details of what is happening.

I would like to ask you for support and help to fix this issue, I am a bit lost...

Thanks


My System SpecsSystem Spec
.
22 Feb 2015   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The CBS.log alone doesn't tell us much...

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
My System SpecsSystem Spec
23 Feb 2015   #3
jyck

Windows 8.1
 
 

Thank you very much for the reply NoelDP,

Sorry I didn't include the complete directory, I thought only the CBS.log was needed. I have followed the steps of the instructions page and attached the right files, CBS.zip and windowsupdate.log.

Thank you very much!

Javier


Attached Files
File Type: log WindowsUpdate.log (1.39 MB, 5 views)
My System SpecsSystem Spec
.

23 Feb 2015   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

CheckSUR is clear.
The Windowsupdate.log is a bit of a mess
The SFC scan showed no problems.

There are some interesting errors in the background CBS data...

Please open an Elevated Command Prompt, and run the following commands...

Code:
REG QUERY HKLM\SYSTEM\CurrentControlSet\Control\WMI\Autologger\EventLog-System\{1c95126e-7eea-49a9-a3fe-a378b03ddb4d}
REG QUERY HKLM\SYSTEM\CurrentControlSet\services\eventlog\System\Microsoft-Windows-DNS-Client
 
.
Post the results


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.
My System SpecsSystem Spec
24 Feb 2015   #5
jyck

Windows 8.1
 
 

thanks for your analysis, I have run the commands you mentioned and this is the result:

Code:
C:\Windows\system32>REG QUERY HKLM\SYSTEM\CurrentControlSet\Control\WMI\Autologger\EventLog-System\{1c95126e-7eea-49a9-a3fe-a378b03ddb4d}

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\EventLog-System\{1c95126e-7eea-49a9-a3fe-a378b03ddb4d}
    Enabled    REG_DWORD    0x1
    EnableLevel    REG_DWORD    0x0
    LoggerName    REG_SZ    EventLog-System
    MatchAnyKeyword    REG_QWORD    0x4000000000000000
    MatchAllKeyword    REG_QWORD    0x0
    EnableProperty    REG_DWORD    0x1
    Status    REG_DWORD    0x0


C:\Windows\system32>REG QUERY HKLM\SYSTEM\CurrentControlSet\services\eventlog\System\Microsoft-Windows-DNS-Client

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\System\Microsoft-Windows-DNS-Client
    ProviderGuid    REG_SZ    {1c95126e-7eea-49a9-a3fe-a378b03ddb4d}
    EventMessageFile    REG_EXPAND_SZ    %SystemRoot%\system32\dnsapi.dll
Thanks
My System SpecsSystem Spec
24 Feb 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That looks normal - I admit to being stumped here, so I'm going to have to ask around and see if anyone has any ideas.
My System SpecsSystem Spec
24 Feb 2015   #7
jyck

Windows 8.1
 
 

Thanks NoelDP, I am a bit like you, tried so may things but I dont get this to be sorted out...
My System SpecsSystem Spec
25 Feb 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

This is the response I got from my guru...
Quote:
This looks to be a service problem - in both senses of the word (system and COM).

Get him to run this: http://www.thewindowsclub.com/repair...fix-wu-utility
and then from an ADMIN cmd (must be run as admin...), type in:


regsvr32 wucltux.dll
regsvr32 wuwebv.dll
regsvr32 wups2.dll



All should succeed, and if they don't, that needs investigating. [These are three important .dlls not included in the tool because they're for the most part too new. wups2.dll is particularly important on this machine].
My System SpecsSystem Spec
25 Feb 2015   #9
jyck

Windows 8.1
 
 

Thanks NoelDP,

I have run the FixWu app and the regsvr32 commands but the problem is still there . I will run this afternoon again the sfc and readiness tool and Ill provide the CBS folder maybe something was fixing and we have another issue...
My System SpecsSystem Spec
25 Feb 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

OK - when you get back to it...

Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Right-click on the saved file and select 'Run as Administrator', and tick all the options, then click on the Scan button - copy and paste the report to your response.

My System SpecsSystem Spec
Reply

 Windows Update repeatedly problem - Error 8007054F, 643, 8024200D




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update [kb2843630], error 8024200d
Hello smart people. I require your assistance. Yesterday I installed Windows 7 Home Premium 64bit over my old Windows 7 Home Premium 32bit, and wow, there were a ton of updates. I got all of them installed except for one - kb2843630. I keep getting the same error code - 8024200d. I have...
Windows Updates & Activation
Windows update, error codes 8007054F and 800B0100
The updates I'm trying to install are KB2957689, and KB2931368. MGADiag report: Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data--> Validation Code: 50 Cached Online Validation Code: N/A, hr = 0xc004d302 Windows Product Key:...
Windows Updates & Activation
Windows Update error 800B0100 abd 8024200D
So after a clean install of Windows 7 on a new machine I have been having some bizzare problems (printers refusing to print with no errors and bluetooth devices failing to connect with no errors) and I'm hoping that the failure of these windows updates is at the root of it and hoping that I can...
Windows Updates & Activation
Windows Update (3) Failing install after reboot - error 8007054F
Hey guys, I've read through the post guidance and done everything as requested. Attached is my CBS folder zipped and I've run SURT and SFC scan. I've been trying to install 3 updates through windows Update. I don't have automatic updates, I check and do them manually, always have. I've tried...
Windows Updates & Activation
Windows Update fails repeatedly. Codes 8007054F, 9C59, 800F0826
Hi Recently had a work laptop passed onto me as part of my new job. I cannot get Windows Update to work - either minor updates or IE11 which is the only important update to install. IE11 fails on install, the minor updates fail to configure after rebooting after an update. I have tried...
Windows Updates & Activation
Windows 7 sp1 update error 8024200D and 8007000d
since the past 2 weeks i have been trying to install windows 7 sp1. When i use automatic updates sp 1 gets downloaded properly but while insalling i get the error 8024200D. I have used the system update readiness tool and microsoft fix it. Still the same error. Here are the problems that i could...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:47.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App