Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Service Pack 1 failed install

07 Apr 2015   #11
Ex_Brit

Win 7 Ult SP1/Win 10 Pro (all x64)
 
 

Have you temporarily disabled your antivirus ? This can cause failure of service pack updates.


My System SpecsSystem Spec
.
07 Apr 2015   #12
TheGTShortBus

Windows 7 Home Premium 64bit
 
 

Yes, I am updating from a clean boot with only windows essential services running. I have also downloaded the standalone SP1 installer and when I try to run that it just says the data is invalid. I guess I should also mention that my Windows 7 version was an upgrade option version of windows that was sent to me after I bought my PC with Vista several years ago. Could this cause in issue with updating?
My System SpecsSystem Spec
07 Apr 2015   #13
Ex_Brit

Win 7 Ult SP1/Win 10 Pro (all x64)
 
 

Windows Essentials should be disabled. When you downloaded the standalone, did you make sure it had completely downloaded, then right-click > Properties and Unblock first before using it? The original upgrade path shouldn't have any bearing here. I'm assuming you are completely updated so far, inclusing IE etc. ?
My System SpecsSystem Spec
.

07 Apr 2015   #14
TheGTShortBus

Windows 7 Home Premium 64bit
 
 

Well, after you mentioned it, I checked the file that I downloaded and it was about half of the size it was listed as on the windows website... redownloaded and tried again after unblocking it and it seems to be working correctly as of now. If everything goes well, I will post back and mark as resolved. Fingers crossed, and thanks to both of you for all the help, I greatly appreciate it!
My System SpecsSystem Spec
07 Apr 2015   #15
Ex_Brit

Win 7 Ult SP1/Win 10 Pro (all x64)
 
 

That sounds good. Hope all goes well ;-)
My System SpecsSystem Spec
07 Apr 2015   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The ..0900 error is fairly characteristic, and refers to missing/damaged/corrupt catalog files.

...from your old CheckSUR log...
Code:
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_7_for_KB2799494~31bf3856ad364e35~amd64~~6.1.1.0.mum  Line 1: Ť–Ř
Please run another CheckSUR scan, and post the new log file
My System SpecsSystem Spec
07 Apr 2015   #17
TheGTShortBus

Windows 7 Home Premium 64bit
 
 

Well, unfortunately the update still did not take. The stand alone installer ran all the way through and then at the very end it said the installation was not successful with the error shown in the attached image. I searched the error and came up with a few suggestions from Microsoft, including running a diagnostic tool to reset windows update components, but nothing that has worked. Maybe you guys have an idea? Thanks again..

Windows 7 Service Pack 1 failed install-error_sxs_assembly_missing-0x80073701-.png


My System SpecsSystem Spec
08 Apr 2015   #18
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

As I said, please run CheckSUR again, and post the new log file.
My System SpecsSystem Spec
11 Apr 2015   #19
TheGTShortBus

Windows 7 Home Premium 64bit
 
 

Ok, I was able to run another CheckSUR and it looks like that came back clear. But I also ran SFC /SCANNOW again and it has errors again now. I've attached these files to the post below, but the CbsPersist log was too large to compress and send. I'll have to find another way to send that if you need to see it as well. Hopefully there is something that we can figure out, but I'm thinking I may need to start considering a clean reinstall

Attachment 355798
My System SpecsSystem Spec
12 Apr 2015   #20
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the error from the SFC scan...
Code:
 Line 42349: 2015-04-11 07:13:50, Info                  CSI    00000629 [SR] Repairing 1 components
 Line 42350: 2015-04-11 07:13:50, Info                  CSI    0000062a [SR] Beginning Verify and Repair transaction
 Line 42353: 2015-04-11 07:13:51, Info                  CSI    0000062c [SR] Cannot repair member file [l:24{12}]"nvd3dumx.dll" of nv_lh.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
This is the same file that was in gtbab - and begs the question of what is corrupting this file repeatedly.
The most likely are either driver updates, malware, or a hardware problem (RAM or HD).
Let's check the hard drive first.


Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.
At the Command prompt, type
CHKDSK C: /R
and hit the Enter key.
You will be told that the drive is locked, and the CHKDSK will run at the next boot - hit the Y key, and then reboot.
The CHKDSK will take a few hours depending on the size of the drive, so be patient!
After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) - then post the event logs...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.
My System SpecsSystem Spec
Reply

 Windows 7 Service Pack 1 failed install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Factory Windows 7 Service pack 1 but service pack shows in updates?
Just bought new never used factory fresh PC Acer AXC-605-UR29 Windows 7 Service Pack 1 manufacrtured this year, I checked for latest updates and sure enough Service Pack 1 shows up in updates Windows 7 Service Pack 1 for x64-based Systems (KB976932) Download size: 9.1 MB
Windows Updates & Activation
Windows 7 Service Pack 1 failed to install
I cant install windows 7 service pack 1. Unknown error help me
Windows Updates & Activation
Windows 7 Service Pack failed to update, error code 26
I have a HP mini 110-3000 and am trying to install the Windows 7 Service Pack 1 but every time I have tried to update, it comes up with error code 26. I have tried everything that I could think of and need assistance.
Windows Updates & Activation
Service Pack Failed to Install. Reverting Changes. (Vista x86)
So I've got a Dell back my apartment that keeps looping because Service Pack Failed to install, it shuts down and reboots, and then it loops. Even in Safe Mode, tried startup recovery to try a system restore, but that crashes and then the laptop shuts down afterwards. Is there a fix? If, so...
Windows Updates & Activation
Can't install Windows 7 Service Pack 1
I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me:Error 0x80070002 I've looked...
Windows Updates & Activation
Office XP Service Pack 3 Update Failed
I am running Windows 7. For some reason the list of updates includes an update for Office XP Service Pack 3. However, this update always fails. Why does Windows 7 include an update for Office XP. All the other updates install fine.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 15:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App