Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 update error code 800B0100

24 Mar 2015   #11
travereno

Windows 7 home premium 64 bit
 
 

Should I try to run windows update after I run CHECKSUR? I will do in a couple hours after work.


My System SpecsSystem Spec
.
24 Mar 2015   #12
travereno

Windows 7 home premium 64 bit
 
 

Here are the updated logs. I will wait to try the update again until i hear further instruction.

CheckSUR.log

CheckSUR.persist.log


My System SpecsSystem Spec
25 Mar 2015   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Good - the errors which CheckSUR can fix are now gone.
We need to address the others at this point.
Please run another SFC /SCANNOW, and post the new CBS.log file.
My System SpecsSystem Spec
.

25 Mar 2015   #14
travereno

Windows 7 home premium 64 bit
 
 

Here you go!

Attachment 353763
My System SpecsSystem Spec
25 Mar 2015   #15
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I get 'invalid attachment'?
My System SpecsSystem Spec
25 Mar 2015   #16
travereno

Windows 7 home premium 64 bit
 
 

Weird. Ill try again, this time, I'll zip it. I've also included the most recen CBS persist cab file, which is zipped as well. Thanks


Attachment 353819

Attachment 353820

Here you go!
My System SpecsSystem Spec
26 Mar 2015   #17
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Great - the SFC scan shows these errors...
Code:
 Line 3555: 2015-03-25 06:53:58, Info                  CSI    00000325 [SR] Repairing 1 components
 Line 3556: 2015-03-25 06:53:58, Info                  CSI    00000326 [SR] Beginning Verify and Repair transaction
 Line 3557: 2015-03-25 06:53:58, Info                  CSI    00000327 [SR] Cannot repair member file [l:104{52}]"_DataOracleClientPerfCounters_shared12_neutral_D.ini" of Microsoft-Windows-NETFXCoreComp.Resources, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-us", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 3558: 2015-03-25 06:53:58, Info                  CSI    00000328 [SR] Cannot repair member file [l:80{40}]"_dataperfcounters_shared12_neutral_D.ini" of Microsoft-Windows-NETFXCoreComp.Resources, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-us", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
 Line 3559: 2015-03-25 06:53:58, Info                  CSI    00000329 [SR] Cannot repair member file [l:58{29}]"_Networkingperfcounters_D.ini" of Microsoft-Windows-NETFXCoreComp.Resources, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-us", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
This correlates nicely with the ones found by CheckSUR...
Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 _DataOracleClientPerfCounters_shared12_neutral_D.ini amd64_microsoft-windows-n..xcorecomp.resources_31bf3856ad364e35_6.1.7601.17514_en-us_61a8bbbea8eff9bd 
(f) CSI Payload File Missing 0x00000000 _dataperfcounters_shared12_neutral_D.ini amd64_microsoft-windows-n..xcorecomp.resources_31bf3856ad364e35_6.1.7601.17514_en-us_61a8bbbea8eff9bd 
(f) CSI Payload File Missing 0x00000000 _Networkingperfcounters_D.ini amd64_microsoft-windows-n..xcorecomp.resources_31bf3856ad364e35_6.1.7601.17514_en-us_61a8bbbea8eff9bd 
(f) CSI Payload File Missing 0x00000000 _DataOracleClientPerfCounters_shared12_neutral_D.ini amd64_microsoft-windows-n..xcorecomp.resources_31bf3856ad364e35_6.1.7600.16385_en-us_5f77a7f6ac017623 
(f) CSI Payload File Missing 0x00000000 _dataperfcounters_shared12_neutral_D.ini amd64_microsoft-windows-n..xcorecomp.resources_31bf3856ad364e35_6.1.7600.16385_en-us_5f77a7f6ac017623 
(f) CSI Payload File Missing 0x00000000 _Networkingperfcounters_D.ini amd64_microsoft-windows-n..xcorecomp.resources_31bf3856ad364e35_6.1.7600.16385_en-us_5f77a7f6ac017623
I'll post a fix protocol later.
My System SpecsSystem Spec
26 Mar 2015   #18
travereno

Windows 7 home premium 64 bit
 
 

Sounds great, thank you!
My System SpecsSystem Spec
26 Mar 2015   #19
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - tnoab.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\tnoab
hit the enter key - if you get a 'Not Found' error try
DIR D:\tnoab
or
DIR E:\tnoab



The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



XCOPY <drive>:\tnoab <drive>:\windows\winsxs /y /i /s /v /h



(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
26 Mar 2015   #20
travereno

Windows 7 home premium 64 bit
 
 

Here you go! The latest CBS persist cab file is 14MB compressed, so i can't upload it. Here is the CBS log file though.


Attachment 353952
My System SpecsSystem Spec
Reply

 Windows 7 update error code 800B0100




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update Error code 800B0100
I'm not sure exactly when my Windows update stopped working, but the last update to install was Windows Defender KB915597 on 7/29/2014. I ran CheckSUR and attached is my log file. Any help is greatly appreciated. Above is the error I get when checking for updates. I had to exclude older...
Windows Updates & Activation
Windows Update error code 800B0100
Hello SevenForums, the last couple of weeks I have had problems installing 2 Security Updates, published 10-2-2015. They are the following: - Security Update for Windows 7 for x64-based Systems (KB3004375) - Security Update for Windows 7 for x64-based Systems (KB3031432) I have tried to...
Windows Updates & Activation
Windows Update error code : 800B0100
1. System Update Readiness Tool (SURT) I ran this once; finished within 15 minutes. No problems. 2. SFC Scan Verification 100% complete. Windows Resource Protection did not find any integrity violations.
Windows Updates & Activation
Windows Update Error Code 800B0100
Hi Guys its Brandon Bias (not new to forum but is noob about windows) One day i was installing updates as usual there were 15 updates all of them were installed but 6 updates failed(1 OPTIONAL 5 IMPORTANT) i dont know why The screenshots are in attachments 1 screenshot shows the error Code 1...
Windows Updates & Activation
Windows update error code 800b0100
Every time I try to check for updates I get this error code seconds after checking for updates. It is a fresh install of Windows 7 Home Premium x64 SP1. The error code in the bottom left is always '800b0100'. SFC came back with no errors. I will attach the SURT log, it has 8 errors in it, but I do...
Windows Updates & Activation
Windows Update error code: 800b0100
Need help in resolving the aforementioned Windows Update error.
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App