Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 can not update: Error code 800B0100

06 May 2015   #31
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The X:\ drive is the active drive in a Repair Environment - and disappears when the environment is shut down.
Copying to the X:\ drive is therefore sending the files to a black hole.

The correct drive in your command would be whichever one shows all the folders in the C:\ drive - you seem to have made a copy of the tt1ab folder in the G:\ drive, which translates to the D: drive in the Repair environment.

This means that you copied from the G:\ drive to a subfolder in the G:\drive - which for whatever reason, doesn't appear in the screenshots.

Check that the drive found for the tt1ab folder has the Volume Name 'Windows' and NOT 'SSD' then adjust the command accordingly.


My System SpecsSystem Spec
.
07 May 2015   #32
toast01

Windows 7 Home Premium x64
 
 

So I ran into another problem tonight, it gets better and better:

As I said, I could NOT find the correct drive in the repair environment. I also noticed that the dialog before choosing the command prompt did not show a windows installation.

I tried a DIR command on every letter in the alphabet, but could not find the right drive.
So I tried to install new drivers for my hard disk, but they were up to date.

Turns out, that the Repair Environment does not have the correct drivers for my windows drive.
To clarify: The drive windows is installed on is a OCZ Revodrive, a PCIe drive.

I attached a chat log with someone from OCZ support.

So I had to make a repair DVD (How To Create a Windows 7 System Repair Disc [Easy]), so I could make an ISO image with a program called NTLite.
Then I should insert the drivers into this image, and burn it onto a DVD again. Which does NOT work.

So that is were I'm stuck now. I don't suppose you have any knowledge of this software called NTLite?


Attached Files
File Type: txt OCZ Chat log.txt (2.1 KB, 3 views)
My System SpecsSystem Spec
11 May 2015   #33
toast01

Windows 7 Home Premium x64
 
 

So, burning the driver "injected" ISO still has not worked jet, so I will try the same procedure with the windows installation disk tonight.

But I was wondering, should it be possible to copy those files with Linux? It should not be too difficult making a bootable ubuntu CD..
My System SpecsSystem Spec
.

11 May 2015   #34
toast01

Windows 7 Home Premium x64
 
 

Nevermind, I just fixed it! I ripped my windows 7 installation DVD and used a USB stick to boot from the ISO file with the driver.

(I just noticed the button in the repair environment which said something about loading drivers, I do not want to know if that should have worked, saving me three evenings of frustration )

Anyways, I attached the CBS.log file to this reply!
My System SpecsSystem Spec
12 May 2015   #35
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 


OK - same procedure, since it worked for you...
filename is aplac.zip


PLEASE IGNORE THIS - posted to the wrong thread!!
My System SpecsSystem Spec
12 May 2015   #36
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the error from your SFC scan...
Code:
 Line 51737: 2015-05-11 22:35:42, Info                  CSI    00000334 [SR] Repairing 1 components
 Line 51738: 2015-05-11 22:35:42, Info                  CSI    00000335 [SR] Beginning Verify and Repair transaction
 Line 51741: 2015-05-11 22:35:42, Info                  CSI    00000337 [SR] Cannot repair member file [l:50{25}]"msmpeg2vdec-ppdlic.xrm-ms" of Microsoft-Windows-MSMPEG2VDEC, Version = 7.1.7601.18519, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 51744: 2015-05-11 22:35:42, Info                  CSI    00000339 [SR] Cannot repair member file [l:30{15}]"msmpeg2vdec.dll" of Microsoft-Windows-MSMPEG2VDEC, Version = 7.1.7601.18519, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I'll post a fix protocol later. (using a different method)
My System SpecsSystem Spec
28 May 2015   #37
toast01

Windows 7 Home Premium x64
 
 

Hello,

Did you find some time for the fix protocol yet?

Thanks in advance!
My System SpecsSystem Spec
30 May 2015   #38
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Sorry about that - I got overtaken by events!

Anyhow, here we are...


Please download SFCFix from here... http://www.sysnative.com/niemiro/apps/SFCFix.exe and save it to your desktop (we'll need it later)

I've uploaded a file - SFCFix.zip - to my OneDrive at https://onedrive.live.com/redir?resid=936736BB8FCEB92F!2026&authkey=!AOwaOc7D0E9jjug&ithint=file%2czip
Please download and save it to the desktop.

Now drag the SFCFix.zip file over onto the SFCFix.exe file - this should force SFCFix to run the file
It will create a new log file - please upload that.

Now run the SFC /SCANNOW again
Post the new CBS.log file

My System SpecsSystem Spec
03 Jun 2015   #39
toast01

Windows 7 Home Premium x64
 
 

Don't worry! I won't dare to complain, given the hours you have probably put into my problem

I attached both log files onto this reply!


Attached Files
File Type: txt SFCFix.txt (5.9 KB, 2 views)
My System SpecsSystem Spec
03 Jun 2015   #40
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The SFC scan shows this, still...
Code:
 Line 8749: 2015-06-03 20:17:47, Info                  CSI    00000334 [SR] Repairing 1 components
 Line 8750: 2015-06-03 20:17:47, Info                  CSI    00000335 [SR] Beginning Verify and Repair transaction
 Line 8753: 2015-06-03 20:17:47, Info                  CSI    00000337 [SR] Cannot repair member file [l:50{25}]"msmpeg2vdec-ppdlic.xrm-ms" of Microsoft-Windows-MSMPEG2VDEC, Version = 7.1.7601.18519, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 8756: 2015-06-03 20:17:47, Info                  CSI    00000339 [SR] Cannot repair member file [l:30{15}]"msmpeg2vdec.dll" of Microsoft-Windows-MSMPEG2VDEC, Version = 7.1.7601.18519, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
AAAARRRGGGHHH!!
I posted the x64 files, rather than the x86 ones!


I'll try again tomorrow, after I've slept on it!

SORRY!
My System SpecsSystem Spec
Reply

 Windows 7 can not update: Error code 800B0100




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 update error code 800B0100
Hello. I've been constantly trying to update my computer. I previously got both error code 800b0100 and error code 80073712. After downloading and running CHECKSUR, the 80073712 code went away, and now i only receive 800b0100. I've run CHECKSUR many times with no fix. I've attached my CBS folder,...
Windows Updates & Activation
Windows Update error with code 800B0100
First I wanna say hello to all you guys trying to solve our problems. My problem is over a two months old. Ill keep getting that error code whenever I try to install update Security Update Microsoft.NET Framework 3.5.1 on Win7 SP1 or KB2937610. I tried almost everything I knew. Use SURT,tried a...
Windows Updates & Activation
Windows Update error code 800B0100
Hello SevenForums, the last couple of weeks I have had problems installing 2 Security Updates, published 10-2-2015. They are the following: - Security Update for Windows 7 for x64-based Systems (KB3004375) - Security Update for Windows 7 for x64-based Systems (KB3031432) I have tried to...
Windows Updates & Activation
Windows Update error code 800B0100
I get error code 800B0100 when installing update KB2973112 and KB2943357 on a Windows 7 Professional x64 system. Here my CheckSUR.log Thanks in advance.
Windows Updates & Activation
Windows update error code 800b0100
Every time I try to check for updates I get this error code seconds after checking for updates. It is a fresh install of Windows 7 Home Premium x64 SP1. The error code in the bottom left is always '800b0100'. SFC came back with no errors. I will attach the SURT log, it has 8 errors in it, but I do...
Windows Updates & Activation
Windows Update error code 800B0100
Suddenly yesterday Windows update starting returning an error each time I tried to install updates. The updates are being downloaded ok but when I select install I get the following: Code 800B0100 Windows update encountered an unknown error I have researched this but the information I found...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App