Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Some Updates Failed

06 May 2015   #1
wil7sdni

WINDOWS 7 ULTIMATE X64 BUILD 7601
 
 
Some Updates Failed

Hi would like to ask if whats wrong with my installation that it keeps failing to update and install KB958559. Im not able to see the "Retart Now" button after updating, which means it only end up on "Some updates was not installed, update on KB958559". Please see attaached file

I already came up and changed my registry "RegisterySizeLimit", uninstalled my Kaspersky, malwarebytes, and do clean reboot, Change my Windows installer in Services.msc to Auto and Cleaned my temporary files folder and in IE explorer. but still cannot update the KB958559. Please help. I have ASUS windows 7 service pack 1 ultimate with build of 7601.




Attached Images
Some Updates Failed-kb958559.jpg 
My System SpecsSystem Spec
.
07 May 2015   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
My System SpecsSystem Spec
07 May 2015   #3
wil7sdni

WINDOWS 7 ULTIMATE X64 BUILD 7601
 
 

While System Update readiness tool is still installing,
Ok Ive search in Event viewer and find this error in installing VPC a while ago.

Windows update "Update for Windows (KB958559)" could not be installed because of error 2147943176 "The client of a component requested an operation which is not valid given the state of the component instance." (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\bongjane\Desktop\Windows6.1-KB958559-x64-RefreshPkg.msu" ")


Might this help solving the problem.

My System SpecsSystem Spec
.

07 May 2015   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Let's see the results of the scans first - then we'll worry about past data.
My System SpecsSystem Spec
07 May 2015   #5
wil7sdni

WINDOWS 7 ULTIMATE X64 BUILD 7601
 
 

Heres the attachement after doing the Windows update Posting Instructions...

The Result was the same when I did the Event Viewer

Windows update "Update for Windows (KB958559)" could not be installed because of error 2147943176 "The client of a component requested an operation which is not valid given the state of the component instance." (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\bongjane\Desktop\Windows6.1-KB958559-x64-RefreshPkg.msu" ")
My System SpecsSystem Spec
07 May 2015   #6
wil7sdni

WINDOWS 7 ULTIMATE X64 BUILD 7601
 
 

2nd file
My System SpecsSystem Spec
07 May 2015   #7
wil7sdni

WINDOWS 7 ULTIMATE X64 BUILD 7601
 
 

3rd file and windowsupdatelog


Attached Files
File Type: log WindowsUpdate.log (1.82 MB, 1 views)
My System SpecsSystem Spec
08 May 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the error sequence after a reboot...
Code:
  StageFile (2): flags: 8 app: (null) comp: Microsoft-Windows-WindowsUpdateClient-ActiveX, Version = 7.6.7600.320, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral file: [ml:22{11},l:20{10}]"wuwebv.dll" srcfile: @0x20f198
2015-05-07 22:00:08, Error                 CSI    00000799 (F) A previous transaction requested a reboot, so you cannot commit any transactions until you reboot.
[gle=0x80004005]
2015-05-07 22:00:08, Error                 CSI    0000079a (F) STATUS_REQUEST_OUT_OF_SEQUENCE #19032367# from Windows::COM::CComponentStore::ApplyTransactionNow(...)[gle=0xd000042a]
2015-05-07 22:00:08, Error                 CSI    0000079b@2015/5/7:14:00:08.526 (F) d:\win7sp1_gdr\base\wcp\componentstore\com\store_transaction.cpp(1841): Error STATUS_REQUEST_OUT_OF_SEQUENCE originated in function Windows::COM::CComponentStore::ApplyTransactionNow expression: (null)
[gle=0x80004005]
2015-05-07 22:00:18, Error                 CSI    0000079c (F) HRESULT_FROM_WIN32(ERROR_REQUEST_OUT_OF_SEQUENCE) #19032228# from Windows::COM::CPendingTransaction::IStorePendingTransaction_Apply(...)[gle=0x80070308]
2015-05-07 22:00:18, Error                 CSI    0000079d (F) HRESULT_FROM_WIN32(ERROR_REQUEST_OUT_OF_SEQUENCE) #19030795# from Windows::ServicingAPI::CCSITransaction::ICSITransaction2_AddFiles(Flags = 1, a = @0x425320, fn = @0x425b20, fp = @0x426320, disp = 0, op = 0)[gle=0x80070308]
2015-05-07 22:00:18, Info                  CBS    Failed to add to transaction package: WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x80070308 - ERROR_REQUEST_OUT_OF_SEQUENCE]
2015-05-07 22:00:18, Error                 CBS    Failed to stage execution package: WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x80070308 - ERROR_REQUEST_OUT_OF_SEQUENCE]
2015-05-07 22:00:18, Info                  CSI    0000079e@2015/5/7:14:00:18.803 CSI Transaction @0x32baee0 destroyed
Try this...
Open an Elevated Command Prompt, and run the following commands...

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG DELETE HKLM\COMPONENTS /V PendingRequired


reboot and then attempt Windows Update again.
My System SpecsSystem Spec
08 May 2015   #9
wil7sdni

WINDOWS 7 ULTIMATE X64 BUILD 7601
 
 

WOw that was amazing. Didnt expect that its was the same as your previous solution on other errors, posted in different thread.

If i could give you more stars ill be glad to. But that was great. . Wasted 2 days trying to find solutions myself but it took you a less than a minute.

Thank You

Wish I could copy your brain, Coz I love Programming but sadly Im not.
My System SpecsSystem Spec
08 May 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I take it that the 'fix' worked then?


Good luck!
My System SpecsSystem Spec
Reply

 Some Updates Failed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Updates Failed BITS failed to start error code 2147024894
anybody have any ideas? have tried sfc /scannow also the steps in this http://www.sevenforums.com/tutorials/113399-windows-update-error-80246008-windows-7-fix.html but to no avail, i still receive the error message i have also used take ownership on the downloader file in...
Windows Updates & Activation
HELP PLEASE: Updates failed
Hello. I hope you could help me here. Well there's been a problem with my Laptop for a month now. The updates were installed, but when system restarted the same problem occured. I read all your posts here, I tried but no use. There are issues: The WIN7 Home Premium x64...
Windows Updates & Activation
2 recommended updates failed.
Windows 7 hp 32bit. During update 2 of 9 updates failed. Reason: Powersupply got cut off. I think the 2 updates where downloaded, but are not installed. Updates in question: kb982018 and kb2529073. Q: Is there a way to clear the updates and do the updating again? Thanks.
Windows Updates & Activation
Many Updates Failed
Hi Guys Just installed windows 7 service pack 1 with no problems but after my system restarted my task bar said updates installed successfully click here to see what was installed. Now when i click in the update history it tells me around 70 seperate updates have failed to install. Now this...
Windows Updates & Activation
failed updates
Hi all, I reinstalled win7 and let it be updated. it now written that windows up to date but i just looked the update history and realized that there are too many failed updates. there seem no problem while working and maybe updates are just outdated but still want to ask if it is ok :) thanx...
Performance & Maintenance
Failed Updates
Not exactly sure where to post this, but this seems to be the most logical place for it. If you ever get an update that fails to install correctly, simply select Try Again. I had this problem with an update for Vista X64 when I carried out my weekly update routine. It is possible that a corrupt...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App