Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error code 80070005 trying to install KB3033890 (WMP patch)

04 Jul 2015   #51
freecomkcf

Windows 7 Home Premium 64-bit
 
 

alright well i guess ill be back in 12 or so hours (thats how long it takes for me to do a virus scan, at any rate)


My System SpecsSystem Spec
.
04 Jul 2015   #52
freecomkcf

Windows 7 Home Premium 64-bit
 
 

CHKDSK just finished, said the volume was clean.

gonna boot into safe mode so i can run SFC, ill be back with the files you asked for in a few minutes.
My System SpecsSystem Spec
04 Jul 2015   #53
freecomkcf

Windows 7 Home Premium 64-bit
 
 

sfc scannow saying the same thing it's been saying the past times i've ran it - there's corrupt files but can't fix them.

Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Windows\system32>sfc /scannow

Beginning system scan.  This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

C:\Windows\system32>


Attached Files
File Type: zip event viewer (july 4 2015).zip (5.61 MB, 1 views)
My System SpecsSystem Spec
.

04 Jul 2015   #54
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the SFC errors...
Code:
 Line 29870: 2015-07-04 09:38:54, Info                  CSI    00000381 [SR] Repairing 3 components
 Line 29871: 2015-07-04 09:38:54, Info                  CSI    00000382 [SR] Beginning Verify and Repair transaction
 Line 29874: 2015-07-04 09:38:54, Info                  CSI    00000384 [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 29877: 2015-07-04 09:38:54, Info                  CSI    00000386 [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 29880: 2015-07-04 09:38:55, Info                  CSI    00000388 [SR] Cannot repair member file [l:14{7}]"fde.dll" of Microsoft-Windows-fde, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 29883: 2015-07-04 09:38:55, Info                  CSI    0000038a [SR] Cannot repair member file [l:22{11}]"fdeploy.dll" of Microsoft-Windows-fdeploy, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
There are a few odd entries in the event logs - which I'll come to later.
I'll post a fix protocol for these error later (prolly tomorrow, now)
My System SpecsSystem Spec
27 Jul 2015   #55
freecomkcf

Windows 7 Home Premium 64-bit
 
 

hey, sorry for not checking back on this thread in a while - real life things to attend to... any news on that fix you were working on?
My System SpecsSystem Spec
28 Jul 2015   #56
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Sorry about that - I've had my own frustrations as well!

I've uploaded a file - fcfaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\fcfaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\fcfaa
or
DIR E:\fcfaa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\fcfaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
01 Aug 2015   #57
freecomkcf

Windows 7 Home Premium 64-bit
 
 

here's the log.
My System SpecsSystem Spec
02 Aug 2015   #58
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Great! the only remaining errors are from KB3022345, which can be ignored.

Do a check for updates, and attempt to install only the oldest found update.
If it goes in OK, try the rest
If it fails, post the C:\Windows\windowsupdate.log file.
My System SpecsSystem Spec
02 Aug 2015   #59
freecomkcf

Windows 7 Home Premium 64-bit
 
 

KB3033890 already borked, and i didn't even restart my computer yet - it gave me error 80246007. here's the log.

still got 2 other hidden ones i haven't tried yet, from the topic i mentioned way back in OP.


Attached Files
File Type: log WindowsUpdate.log (1.64 MB, 1 views)
My System SpecsSystem Spec
02 Aug 2015   #60
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Reboot and try again - if you get the same error message, try this...

Open an Elevated Command Prompt, and run the following commands


Code:
REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG DELETE HKLM\COMPONENTS /V PendingRequired
 
.
then reboot, and try Windows Update again.
My System SpecsSystem Spec
Reply

 Error code 80070005 trying to install KB3033890 (WMP patch)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
KB3023266 Fails with Error Code 80070005
After failing twice, I read and followed the directions MS posts for this error code: (1) download and extract subinacl.exe and (2) create/run as admin the reset.cmd batch file, as instructed. Reset.cmd ran as expected. Additional attempt to install update failed with the same error. I have hidden...
Windows Updates & Activation
windows could not search for new updates, Code 80070005
"an error occurred while checking for new updates for your computer." Most recent check for updates: never updates were installed: never I am trying to update my windows 7 to sp1 but I could not find a solution for error 80070005, help would be greatly appreciated!
Windows Updates & Activation
cannot install KB2862152 error code 80070005
the update is reverting changes ataching cbs log
Windows Updates & Activation
update WDDM error code 80070005
hi, one day, I suddenly cannot watch videos nor play video games I also lost aero effect my video card had problems windows told me that to solve the problem, I need to update WDDM so I tried to install "Intel Corperation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics...
Windows Updates & Activation
A patch is preventing the system from starting - Error code = 0 x 490
I recently had to replace some bad memory which caused my home built system to fail to boot into Windows. I have a dual-boot (XP on one HD, and Win7 on a separate HD). The system has been running smoothly for more than a year until the failed RAM module. I can boot into XP, but not into...
BSOD Help and Support
msn problem error code 80070005
Hey guys, I've been having this problem for like 6 months... and it pisses me off so badly... ! :@ http://img707.imageshack.us/img707/6691/msnpr0blem.th.jpg thanks in advance..
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App