Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Copy of Windows not genuine, Build 7601

15 Jul 2015   #101
tzxlyd

Windows 7, 64 bit Home Premium.
 
 
Seatools for Windows test

Arc,
I think I forgot to attach the capture of the Seatools test.




Attached Thumbnails
Copy of Windows not genuine, Build 7601-capture-seagate-hdd-test-windows.png  
My System SpecsSystem Spec
.
15 Jul 2015   #102
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Good to know.

So it was stable over the long time that was required to complete the test.

Now what remains there is the possibility any sort of defect from the part of the SATA port. If you can, remove the HDD and re-insert it, to make it sure that the disc is properly seated.
My System SpecsSystem Spec
18 Jul 2015   #103
tzxlyd

Windows 7, 64 bit Home Premium.
 
 

Arc,
I did remove the HDD and I removed the ram to make sure they too were properly seated. I was intending on removing the entire bottom cover to check out the remaining parts of the system board but there are 2 screws that do not want to budge so I have abandoned that for now. I see Greg had responded following your request and I was unaware of that until now as I left the computer off while I was trying to get the back cover removed. I will try to use the computer over the remainder of the weekend to see if there is another BSOD or if it was just improperly seated drive or memory. If there is another BSOD I will proceed to the clean reinstall as Greg is obviously now very strongly recommending.
My System SpecsSystem Spec
.

24 Jul 2015   #104
tzxlyd

Windows 7, 64 bit Home Premium.
 
 

Arc,
I wanted to give you an update. I have been using the machine now fairly regularly and there has not been another BSOD. I did not want to jinx it by responding too soon but I have had absolutely no problems. I decided yesterday afternoon to put it through some additional tests so I ran Memtest86 for 8.5 hours and it passed every test and iteration before I exited the ram tests. I then left it on to run the Seatools generic long test once more and when I turned it on this morning it showed that again it had passed that test.

I believe we have reached a resolution of the problem -- it was either improperly seated Ram or HDD. Unfortunately, I cannot say for certainty which of them was the problem but I suspect it was the Ram which is the reason I uninstalled and reinstalled it along with the HDD. I have not had any problems with long page loading as there have been several instances where this has occurred over the last 5-6 days and the pages have eventually loaded.

There have been a couple of instances after clicking on a Google search link where the desktop screen will appear for 5-10 seconds before opening a webpage but ultimately the webpage will be displayed. Previously this would have ultimately led to a BSOD 99.99% of the time. The computer boots fine and seems to be running cooler although I have not loaded any programs to test the CPU temperature. Let me know if there is any additional testing or logs you recommend to confirm the issue has been completely resolved before I mark this thread as solved and send out the numerous thank you messages to all of those who have helped me with my issue.
My System SpecsSystem Spec
24 Jul 2015   #105
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Just my two cents worth gain you mentioned not being able to dislodge those fixing screws - two things they were crosshead screws or those rotten star / double toothed shaped drivers one has to use and in any case most makers dab the screw end with a hold tight / has it been disturbed? compound which makes getting them out very hard at times - usually a blue coloured muck .

Now if you ever have to clean slots agin follow this ZI find it works a threat with deskies and laptops.

SLOTCLEANING

Now as for the slots to clean them use a strip of old credit card(or any card thin enough some are better than others ) about 1/2 inch wide nipthe corners off one end - preferably round them offhold apiece of thin lint free cloth over the end dab on some form of alcohol -isopropyl alcohol (what we swab the skin with before an injection) is good and GENTLY swipe along the slots.

This can also be done for the GPU slot/s and also the contacts of thesticks or cards - not the stick but some lint free cloth of course. See my picfor the sick but please be very gentle doing it if you are in any doubt -please ask before doing it but I use this all the time and have yet to damageanything


Attached Images
Copy of Windows not genuine, Build 7601-stick-cleaner.png 
My System SpecsSystem Spec
24 Jul 2015   #106
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Whatever, the most important thing is that the computer is running stable. I think the re-seating did some good job there.

In this situation, I would not suggest you for any further troubleshooting at this moment. Dont fix it when it is not broken.

Keep observing the situation. Report us for any further issue.

In the mean time, you may mark this thread as solved for now. If the issue bounces back at any future time (I wish it will not) just unmark it and continue.
My System SpecsSystem Spec
02 Aug 2015   #107
tzxlyd

Windows 7, 64 bit Home Premium.
 
 

Arc, Gregrocker, Derekimo, Icit2lol, NoelDP and Layback Bear,
Since my last post I have been running my PC heavily and there have not been any signs of problems -- so I am marking my issue as solved. All of you have worked so very hard to assist me with resolving this issue that it simply does not seem like enough to just say thank you because I know how difficult it is to trouble shoot issues of this nature. Each of you have demonstrated to me that your patience and understanding is equaled by your computer knowledge which is a rare combination to say the least.

I am truly indebted to each of you as well as everyone else out there who reviewed my situation to offer a suggestion. This is by far one of the most interesting experiences I have had although it was probably under the worst circumstances imaginable when I consider what was at stake.

As a team and as individuals you each offered me so much of your time and your focus on my issues -- it was truly my pleasure to have made your acquaintances within this forum. I have learned so much more than I knew before I submitted my problem on this forum. I have decided that I will be following this forum and/or its successor when I convert to Windows 10 just to learn more about the maintenance of my PC. Again I thank you all and if I missed anyone please accept my apology as it was inadvertent. You all are truly the best.
My System SpecsSystem Spec
03 Aug 2015   #108
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You're welcome- thanks for the nice words.

Good luck!
My System SpecsSystem Spec
03 Aug 2015   #109
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by tzxlyd View Post
Arc, Gregrocker, Derekimo, Icit2lol, NoelDP and Layback Bear,
Arc, Gregrocker, Derekimo, Icit2lol, NoelDP, Layback Bear, and tzxlyd.
My System SpecsSystem Spec
03 Aug 2015   #110
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Nice to see a happy ending great support everyone
My System SpecsSystem Spec
Reply

 Copy of Windows not genuine, Build 7601




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
This copy of Windows 7 is not genuine Build 7601
Hi, My PC is almost 4 years old. It was bought from EBuyer in the UK and had Windows 7 preinstalled with the C OA sticker on the side of the PCU box. Yet for some reason it has now suddenly started to give me the above message in the bottom right corner of the desktop. As yet the screen has...
Windows Updates & Activation
Windows 7 Build 7601, Copy not Genuine?
Hello. I have a user that recently started experiencing a black desktop screen saying his copy of Windows 7 Enterprise x64 is not genuine, although he can still download and install windows updates. Here is the MGADiag results: Windows Tab: Diagnostic Report (1.9.0027.0):...
Windows Updates & Activation
Windows is not a genuine copy (Build 7601)
Hey guys, My computer was store bought with a pre-installed windows 7, after a malfunction with a system restore i had to use a windows 7 proffessional edition to get the computer back online, however... As i only used the disk to repair previous files, it told me i need an...
Windows Updates & Activation
this copy of windows is not genuine, build 7601
Hi, I have recently received a 'this copy of windows is not genuine, build 7601' message. I have tried a few fixes but clearly not fixed it. Any help much appreciated. Diagnostic Report (1.9.0027.0): -----------------------------------------
Windows Updates & Activation
win 7 pro build 7601 this copy of windows is not genuine please help
my win 7 pro is oem software bought from tiger direct when i built system about 1.5 yrs ago ran fine no problems about 2 months ago blew hard drive and reloaded everything all good activated and updated then build error came on above clock can anyone help called ms and they say they dont know...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App