Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple windows update Errors sfc /scannow shows corrupt

06 Jul 2015   #31
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

Ok I'll install MSE. I had two MSE updates available in optional updates yesterday. But they disappeared from windows update sometime yesterday not sure why they did. I'll manually download and install to tide me over. Might as well run a scan when its installed.

Sorry to keep bugging you I'm a rookie when it comes to these forums and it is hard for me to sit still. I want to keep researching solutions but I've definitely hit a brick wall on my own. I hope I haven't F***ed this up too bad!! Also sorry about the time difference didn't notice your location yesterday.


My System SpecsSystem Spec
.
06 Jul 2015   #32
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

I'll run through all the steps above again, however this is the exact path I went down before I decided to run system restore Sunday. I restored the computer to the state before 4.5.2 was removed and I thought that resolved my .net framework issue from the OP.

Is it my imagination - or has the MSRT stopped installing? (did you Hide it - or is it finally installed/complete?)

Not your imagination I used the universal Extractor (before you told me it was a bad idea) on the installation file and afterwards I was able to run MSRT manually. After the scan completed presto the update went away, I have not idea why but apparently it was satisfied.

Over the past couple days I have used Aaron Stebner's tools with the following results:
1.) verification tool only recognized .net framework up to 3.5 all versions previous to 3.5 were verified as ok
2.) Before the OP I did already run the cleanup tool, however I ran a system restore afterwards thinking this reversed it.

If I run Microsoft .NET Framework Repair Tool it goes to a screen that says click next if I still have problems or finish if it is repaired. If I click next it runs about 1 inch of progress across the screen and never makes it any further. I let this program run for a couple hours and it never moved so I cancelled it.

My version of windows came pre-loaded on this computer and I don't have a disk. Will I need to reach out to Microsoft in the event that I need to do a system repair?

Its as if .net framework has already been uninstalled but it sill shows up in the windows uninstall list. However when I click uninstall/change it tells me it cannot find it. I'll try the steps listed above one more time.
My System SpecsSystem Spec
06 Jul 2015   #33
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

MS won't provide Win7 to OEM users - and the official downloads are no longer public.
You'd either have to risk a Torrent or similar download, or see if you can borrow a disk from a friend. If you do go the download route, you should check the downloaded ISO against the published Hash values. See this thread for instructions...
Repair Install
My System SpecsSystem Spec
.

06 Jul 2015   #34
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

I have other installation disks for other machines in the office. Not to ask all the rookie questions but is there any reason I cannot use a desktop disk to try and repair the Laptop? The windows 7 sticker is on the back of the Laptop so I'm covered there. Honestly I'm more worried about Microsoft office than I am about windows. This computer was purchased for work so the place we purchased from should be able to help if I have to go that route. How bad would it be to leave the computer alone and not repair the .net framework? The computer seems to be working fine just annoying that I cannot get .net framework to install. What applications require framework in order to run properly? Am I about to find a whole bunch of programs that cease to work normally or something like that.

I also assume I need to find an x64 version of windows for the repair install? I am worried I only have the 32 bit variety laying around the office, but I'll cross my fingers and take a look for one.

If I run the repair will I lose any data? Is the repair the same as a re-format? I'll need to backup the data if so...
My System SpecsSystem Spec
06 Jul 2015   #35
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You can retrieve all your license Keys using Belarc Advisor - with one proviso.
If the Office Product ID shows as being -OEM- it may be a pre-installed one. You MUST check that the Office Product Key is legible on the Office (NOT Windows!) COA sticker.
If there's no Office COA sticker, then hopefully the Key will be OK.

Note that you can use ANY genuine ex-MS disk for Windows 7 to create a disk suitable for repair installs (if you first create an ISO file, then rename the ei.cfg file in the ISO then burn the resulting ISO using a slow speed).

For a Repair install, yes, you MUST use the same bitness of media as the installed OS - you'll get told in no uncertain terms if you get it wrong

I think you'll find that you're more likely to have problems finding a 32-bit Windows 7 disk, than a 64-bit one!

With the usual provisos, a repair install is pretty safe - and you're unlikely to lose data. Some settings (and all updates) will be lost. ALWAYS make an external media backup before attempting such drastic surgery on a system!!
There are very few programs that actually require .NET 4+ in Windows 7 - but the number has been increasing. One obvious one is AutoCAD.

Repairing Windows shouldn't (cough, cough) affect Office at all.
My System SpecsSystem Spec
Reply

 Multiple windows update Errors sfc /scannow shows corrupt




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows found corrupt files but was unable to fix(sfc/scannow)
Hey So every time i run the command i get this: http://orig05.deviantart.net/6a08/f/2015/128/8/0/error_by_mkiiix-d8sooyd.png This started to happen after doing a fresh install,and i'm 100% sure that windows updates are causing this,did a fresh OS install twice,the second time i kept running the...
Windows Updates & Activation
How do I fix a corrupt file in Windows 7 that Scannow can't.
I have tried all Windows updates, checked for viruses, done everything within my power, but nothing seems to work. Whenever I open anything that requires Windows Explorer, it that program crashes. I can watch videos online, but not in Windows Media Player, Real Player or Quick Time. I cannot...
Performance & Maintenance
CBS MUM Corrupt 0x800F0900 and other AMD x64 related update errors
new ASUS sabertooth99fx rev2, AMD 8 core 4gz, 16gig ram lost ability to add delete windows components Checking Package Manifests and Catalogs (f) CBS MUM Corrupt 0x00000000 ...
Windows Updates & Activation
BSOD Scannow shows unable to correct corrupt files
BSOD error 2057, often with BAD_POOL_CALLER or dxgmm.sys errors. Checked RAM by removing each stick in turn. Reinstalled video drivers. sfc /scannow shows corrupt files unable to repair despite several runs. Zip file shows CBS log Zip files attached Dell Vostro W7 x86 OEM pre installed on 2 yr...
BSOD Help and Support
64bit Windows Update with multiple errors
hi, did a clean install of 64bit Pro edition on a custom built box with Intel w/station board & RAID1 mirror. All was ok. However, during operation, number of things are happening: * cannot run Windows Update (can go to CPanel, once I click WU, the 'doughnut' keeps on spinning. Tried deleting...
BSOD Help and Support
multiple errors in CBS.log after running sfc /scannow ?
Widnows7 Pro 32bit: Ran sfc /scannow and tried to look at log but am completely lost ! Do know tho that the log contains the word "failed" 707 times ?? Any advice on what step 2 should be after this many "failed's"...or is this normal ? Thanks...TRinAZ
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App