Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple windows update Errors sfc /scannow shows corrupt

04 Jul 2015   #1
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 
Multiple windows update Errors sfc /scannow shows corrupt

I have multiple files that will not update with windows update.

1.) .Net framework 4.5.2 is failing in both windows update & I manually downloaded and it will not install.
a.) When I do a manual install it says the windows installer is not installed correctly.
b.) When I researched this I ended up running sfc/ scannow
i.) I get the message windows resource protection found corrupt files but was unable to fix some of them.
ii.) I'm going to attempt to attach my log from sfc /scannow

2.) Microsoft Silverlight will not install from windows update or manually download install.
3.) The Malicious software removal tool says that it installs fine but when I restart the computer is it in windows update again. This is a never ending cycle. I don't seem to be able to find KB890830 in the installed updated either?


My System SpecsSystem Spec
.
04 Jul 2015   #2
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

I found another post where sfcfix.exe was able to correct my issues with sfc /scannow. After the fix my sfc /scannow doesn't have any issues. Bad news is it didn't fix any of my windows update errors. Manual or otherwise I cannot install the updates listed in the Original post.
My System SpecsSystem Spec
04 Jul 2015   #3
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The SFC/CBS errors are negligible...
Code:
 Line 3597: 2015-07-04 10:06:03, Info                  CSI    00000344 [SR] Repairing 1 components
 Line 3598: 2015-07-04 10:06:03, Info                  CSI    00000345 [SR] Beginning Verify and Repair transaction
 Line 3601: 2015-07-04 10:06:03, Info                  CSI    00000347 [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18869, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
 Line 3604: 2015-07-04 10:06:03, Info                  CSI    00000349 [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18869, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
They are the result of a classic MS cock-up - they tagged these two files as static, rather than variable.


We need more data...

Please follow the Windows Update Posting Instructions and post the requested data


If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file
My System SpecsSystem Spec
.

05 Jul 2015   #4
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 
Update Information - I'm the Original Poster

Thank you NoelDP for helping me get started properly. I have to admit that I have done some other troubleshooting while I was waiting on replies so I wanted to start by giving an update.

1.) I ran a restore from before I uninstalled 4.5.2 framework so I don't need to install it anymore.
2.) I also got a clean sfc /scannow by using sfcfix.exe that I found in other posts.
3.) I'm back to I think the original problem but it is hard to explain what is happening.

I followed your instructions and this is where I am with the steps you told me to take:

1.) I downloaded SURT and ran it but it failed to install snip 1 attachment is the failure screen.
2.) I did run sfc /scannow and it was clean
3.) Windows update error is 656 for the failed silverlight install
4.) I cannot attach the windows log CBS zipped folder as it is 110 MB. Not sure what to do with it now?

I also want to try and explain the weird thing that is happening with the windows malicious software removal tool x64. (KB890830)

1.) It shows up in my available updates every time I look for updates. If I run windows update it will install the update and I get the successful install green check mark. I restart my computer and it is still in the available updates.
2.) I cannot seem to locate the update in my installed updates. Also when my computer restarts I think it might not be completely installing it because my computer shows that I need to restart. If I click start and look at the shutdown icon there is a yellow shield with an exclamation point inside. Usually this means the computer need to restart to install update right? No matter how many times I restart I still have the shield by shutdown.


Attached Images
Multiple windows update Errors  sfc /scannow shows corrupt-snip-1.png 
My System SpecsSystem Spec
05 Jul 2015   #5
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

Trying to do what you asked and send them as separate .zip files. Only two would attached. I'll keep trying.
My System SpecsSystem Spec
05 Jul 2015   #6
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

This is the only cabinet file small enough to fit in the posting limit. I posted the other two in a separate post.
My System SpecsSystem Spec
05 Jul 2015   #7
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Hmm - I see no signs of a SFC scan being run since 19:42:01 yesterday? (~17 hours ago)
Please post the CheckSUR.log and CheckSUR.Persist.log files (from the C:\Windows\Logs\CBS folder) if they exist.
Please also post the latest CBSPersist file (you'll have to zip it first - the forum doesn't accept bare CAB files)
Please also post the SFCFix log if you still have it.
My System SpecsSystem Spec
05 Jul 2015   #8
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

I don't have the SFCfix log anymore, sorry about that.
I opened the latest CBSpersist cab file and zipped the txt file inside but it was still over the 8 MB limit. So I decided to run a new sfc /scannow. However I didn't receive a new persist file when I re-ran the scan. It did overwrite the text file.

I decided to attach a snip of my C:\Windows\Logs\CBS folder to see if this would help.


Attached Thumbnails
Multiple windows update Errors  sfc /scannow shows corrupt-capture-2.png  
Attached Images
Multiple windows update Errors  sfc /scannow shows corrupt-capture-1.png 
My System SpecsSystem Spec
05 Jul 2015   #9
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Good- the SFC scan terminated normally (I do occasionally see apparently successful SFC scans which actually crashed but still managed to apparently produce the above success message!)

There's no errors in the CBS log background either, to give us a clue.

Open Event Viewer

click on theWindows logs entry in the left pane to expand it.

Now click on theApplication entry - wait while it loads.

Click on 'File'in the menu bar and select Save...

Save the file asAppevt.evtx

Repeat for theSystem log

then zip both,and upload them.

My System SpecsSystem Spec
05 Jul 2015   #10
glfngwizkid

Windows 7 Professional Service pack 1 64 bit
 
 

You didn't give me a name for the system files so I just named it systemevt.

Thanks for the help and quick replies. Please let me know if there is more I can do on my side.
My System SpecsSystem Spec
Reply

 Multiple windows update Errors sfc /scannow shows corrupt




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows found corrupt files but was unable to fix(sfc/scannow)
Hey So every time i run the command i get this: http://orig05.deviantart.net/6a08/f/2015/128/8/0/error_by_mkiiix-d8sooyd.png This started to happen after doing a fresh install,and i'm 100% sure that windows updates are causing this,did a fresh OS install twice,the second time i kept running the...
Windows Updates & Activation
How do I fix a corrupt file in Windows 7 that Scannow can't.
I have tried all Windows updates, checked for viruses, done everything within my power, but nothing seems to work. Whenever I open anything that requires Windows Explorer, it that program crashes. I can watch videos online, but not in Windows Media Player, Real Player or Quick Time. I cannot...
Performance & Maintenance
CBS MUM Corrupt 0x800F0900 and other AMD x64 related update errors
new ASUS sabertooth99fx rev2, AMD 8 core 4gz, 16gig ram lost ability to add delete windows components Checking Package Manifests and Catalogs (f) CBS MUM Corrupt 0x00000000 ...
Windows Updates & Activation
BSOD Scannow shows unable to correct corrupt files
BSOD error 2057, often with BAD_POOL_CALLER or dxgmm.sys errors. Checked RAM by removing each stick in turn. Reinstalled video drivers. sfc /scannow shows corrupt files unable to repair despite several runs. Zip file shows CBS log Zip files attached Dell Vostro W7 x86 OEM pre installed on 2 yr...
BSOD Help and Support
64bit Windows Update with multiple errors
hi, did a clean install of 64bit Pro edition on a custom built box with Intel w/station board & RAID1 mirror. All was ok. However, during operation, number of things are happening: * cannot run Windows Update (can go to CPanel, once I click WU, the 'doughnut' keeps on spinning. Tried deleting...
BSOD Help and Support
multiple errors in CBS.log after running sfc /scannow ?
Widnows7 Pro 32bit: Ran sfc /scannow and tried to look at log but am completely lost ! Do know tho that the log contains the word "failed" 707 times ?? Any advice on what step 2 should be after this many "failed's"...or is this normal ? Thanks...TRinAZ
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App