Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Missing manifests - error 80070490

13 Jul 2015   #1
squiff

Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
 
 
Missing manifests - error 80070490

Hi. Your site is a real breath of fresh air after the dozens of unhelpful sites that have been leading me round in circles for the past few days! I wonder if you can help me please? I have not been able to install Windows updates for many weeks now. It is possibly the result of a memory card that went kaput, and my subsequent amateur efforts to clean up afterwards . Anyway, the error code that keeps coming up is 80070490. I have attached the necessary files (I think). Thanks in advance, Squiff.




Attached Images
Missing manifests - error 80070490-error.gif Missing manifests - error 80070490-update.gif 
Attached Files
File Type: log CheckSUR.log (1.5 KB, 3 views)
My System SpecsSystem Spec
.
13 Jul 2015   #2
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

First we'll deal with the Manifests...
Code:
Unavailable repair files:
	winsxs\manifests\amd64_microsoft-windows-installer-engine_31bf3856ad364e35_6.1.7601.22843_none_62089d5be35b3777.manifest
	winsxs\manifests\amd64_microsoft-windows-ie-setup-support_31bf3856ad364e35_11.2.9600.17041_none_a855a9d4736487be.manifest
Then we'll worry about the missing payload files.

I'll post a fix protocol for the manifests a little later.
My System SpecsSystem Spec
13 Jul 2015   #3
squiff

Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
 
 

Many thanks, Noel. Very much appreciated.
My System SpecsSystem Spec
.

13 Jul 2015   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - sqfaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder sqfaa in the same place.
Open this folder - there should be one folder inside it (Manifests)

Copy the content of the Manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
My System SpecsSystem Spec
13 Jul 2015   #5
squiff

Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
 
 

I can't see a lot of difference. Am I doing something wrong? Files attached...


Attached Files
File Type: log CheckSUR.log (1.7 KB, 3 views)
File Type: log CheckSUR.persist.log (13.3 KB, 0 views)
My System SpecsSystem Spec
14 Jul 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

There's a world of difference - CheckSUR has now fixed the two Manifest problems, so all we have to worry about is the missing payload files, which we have to deal with in a different way.

Please run another SFC /SCANNOW, and post the new CBS.log file, in case the fixed manifests bring new errors to light.
Then we can fix the errors it finds.
My System SpecsSystem Spec
14 Jul 2015   #7
squiff

Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
 
 

Okay, here we go...
My System SpecsSystem Spec
14 Jul 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

SFC found just the one error...
Code:
	Line 138441: 2015-07-14 07:27:35, Info                  CSI    0000035a [SR] Repairing 1 components
	Line 138442: 2015-07-14 07:27:35, Info                  CSI    0000035b [SR] Beginning Verify and Repair transaction
	Line 138443: 2015-07-14 07:27:35, Info                  CSI    0000035c [SR] Cannot repair member file [l:24{12}]"mfc80JPN.dll" of Microsoft.VC80.MFCLOC, Version = 8.0.50727.762, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, file is missing
I'll post a fix protocol for that later, as well as the ones from CheckSUR.

Code:
(f)	CSI Payload File Missing	0x00000000	mshtmlmedia.dll	amd64_microsoft-windows-ie-htmlrenderingmedia_31bf3856ad364e35_11.2.9600.17207_none_a0eb76266e4bb104	
(f)	CSI Payload File Missing	0x00000000	mfc80JPN.dll	amd64_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.762_none_fc42961a63b5a82b
My System SpecsSystem Spec
14 Jul 2015   #9
squiff

Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
 
 

Again, many thanks
My System SpecsSystem Spec
14 Jul 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - sqfab.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\sqfab
hit the enter key - if you get a 'Not Found' error try
DIR D:\sqfab
or
DIR E:\sqfab

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\sqfab <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
Reply

 Missing manifests - error 80070490




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win7 Ult sp1 install error, missing manifests
Hello, I've pasted the checkSUR log info from my Dell XPS420 after recently trying to update my Win 7 Ult x64 install to SP1. All other updates install fine, but SP1 does not. I get error 80073712. The log seems to indicate that there are 4 manifest files that are either or corrupt. I've...
Installation & Setup
Error while installing Windows Update, error 80070490
Hello, I am attempting to install a Windows Update for Service Pack 1, and cannot do so. I'm running Windows Ultimate x64 bit, and need the Service Pack to run a couple programs I cannot run without it - namely Dolphinx64 netplay. That being beside the point, I have attempted to run the ISO file...
Windows Updates & Activation
Windows 7 Update/Repair error 0x80070246, missing manifests+mum files
Trying to repair a Windows 7 64bit Dell Laptop. Owner had bad RAM running back from February causing multiple BSOD and unstable behavior - but they kept using it. Got new RAM, it now tests rock solid with both ms ram tests and memtest. No more BSOD. Now trying to repair corrupted files. ...
Windows Updates & Activation
Missing/corrupted manifests (Error 80073712)
Hello, The update KB2868626 is failing with error 80073712. Checksur is telling me there are missing manifest files (see attached log files in CBS.zip - I have removed one of the cabinet files from the zip to keep it below 8MB) and scannow is telling me there are no violations. Please can anyone...
Windows Updates & Activation
Missing/corrupted manifests (Error 80073712)
Whenever I attempt to install KB2742599 (MS13-004: Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: January 8, 2013), I receive an error. I ran the system update readiness tool which identified the fact that...
Windows Updates & Activation
Windows update failing due to missing timezone manifests
Windows update errors are Code 80073712, 800B0100 and 8007065E There are a number of manifests missing that the repair disk/original disk isn't fixing I am running Windows 7 x64 Ultimate (upgrade online after originally installing Pro) help fixing this much appreciated....
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App