Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SP1 Update repeatedly failing, error 0x80073712

30 Jul 2015   #1
skreidle

Windows 7 Home Premium 64bit
 
 
SP1 Update repeatedly failing, error 0x80073712

Good afternoon! From what I've seen in a Whole Lot of Googling, this forum seems to have the most targeted, successful support for the kind of issue I'm seeing.

I've been running Win7 Home Premium for a few years, and every single Windows Update has run successfully (with a snag now and then) except SP1, which returns error 0x80073712 every time.

I've disabled SpyBot S&D and AVG Free, but MS Security Essentials is still running.

I ran SURT (Windows6.1-KB947821-v34-x64), which completed.
(And I discovered I've been attempting to resolve the issue with SURT since September 2012, v22!)

Ran SFC scan as Admin:

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.

Collected CBS.zip from C:\Windows\Logs

Attempted update again.

New error code: 80070002. Followed WinHelp to stop Windows Update service, deleted temporary update files, restarted update service, checked again for updates.

Attempted update again. Found 1 critical (SP1) and 2 optional. Didn't note what they were.

Cancelled install during Win Live Essentials 2011 update. Restarted SP1-only update.

80073712 returned.

Re-collected CBS.zip from C:\Windows\Logs

(I tried to attach CBS.zip, but at ~30MB, it's well over the 8MB limit. Any particular logs you could use instead?

Thanks!


My System SpecsSystem Spec
.
31 Jul 2015   #2
skreidle

Windows 7 Home Premium 64bit
 
 

Ran Windows6.1-KB947821-v34-x64 again, attempted SP1 update again, failed with 80073712 again.

Ran WindowsUpdateDiagnostic again, which reported "Windows Update error 0x80073712(2015-07-21-T-12_43_39A) Not Fixed"
My System SpecsSystem Spec
31 Jul 2015   #3
skreidle

Windows 7 Home Premium 64bit
 
 

I attached CBS.txt.zip (1 big txt file), CheckSUR.zip (2 files), and FilterList.log. CBSpersist.zip (5 files) was too big, but I could zip individually if needed.


Attached Files
File Type: zip CheckSUR.zip (1.8 KB, 2 views)
File Type: log FilterList.log (296 Bytes, 0 views)
My System SpecsSystem Spec
.

02 Aug 2015   #4
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You have some interesting errors there -
Code:
Checking Package Manifests and Catalogs
(f)	CBS MUM Corrupt	0x80070026	servicing\Packages\PA0BDB~1.MUM		Line 1: X'
(f)	CBS Catalog Missing	0x00000002	servicing\Packages\PA0BDB~1.cat		

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f)	CSI Manifest Missing	0x00000002	x86_microsoft-windows-activexcompat_31bf3856ad364e35_8.0.7600.16424_none_111a1d2bdbb4550c.manifest	x86_microsoft-windows-activexcompat_31bf3856ad364e35_8.0.7600.16424_none_111a1d2bdbb4550c
I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.
My System SpecsSystem Spec
02 Aug 2015   #5
skreidle

Windows 7 Home Premium 64bit
 
 

Thanks for looking into it! Here's my components.zip: https://www.dropbox.com/s/o8905k7yal...components.zip
My System SpecsSystem Spec
03 Aug 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

That looks OK.
Please open an Elevated Command Prompt and run the following commands:

TAKEOWN /F C:\Windows\servicing\Packages\PA0BDB*.* /A
DEL C:\Windows\servicing\Packages\PA0BDB*.* /Q

Then run another CheckSUR scan, and post the new CheckSUR.log file.
My System SpecsSystem Spec
03 Aug 2015   #7
skreidle

Windows 7 Home Premium 64bit
 
 

No dice:

C:\Windows\system32>TAKEOWN /F C:\Windows\servicing\Packages\PA0BDB*.* /A

SUCCESS: The file (or folder): "C:\Windows\servicing\Packages\PA0BDB~1.MUM" now
owned by the administrators group.

SUCCESS: The file (or folder): "C:\Windows\servicing\Packages\Package_2_for_KB97
6264~31bf3856ad364e35~amd64~~6.1.1.3.mum" now owned by the administrators group.


C:\Windows\system32>DEL C:\Windows\servicing\Packages\PA0BDB*.* /Q
C:\Windows\servicing\Packages\PA0BDB~1.MUM
Access is denied.
C:\Windows\servicing\Packages\Package_2_for_KB976264~31bf3856ad364e35~amd64~~6.1
.1.3.mum
Access is denied.
My System SpecsSystem Spec
03 Aug 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

OK - we're partway there at least.

Open an Elevated Command Prompt, and run the following commands.

ICACLS C:\Windows\servicing\Packages\PA0BDB~1.MUM
ICACLS C:\Windows\servicing\Packages\PA0BDB~1.MUM /grant Administrators:(F)
DEL C:\Windows\servicing\Packages\PA0BDB~1.MUM

post the results, and then run another CheckSUR scan and post the new log.
My System SpecsSystem Spec
04 Aug 2015   #9
skreidle

Windows 7 Home Premium 64bit
 
 

Commands successful:

C:\Windows\system32>ICACLS C:\Windows\servicing\Packages\PA0BDB~1.MUM
C:\Windows\servicing\Packages\PA0BDB~1.MUM NT SERVICE\TrustedInstaller:(I)(F)
NT AUTHORITY\SYSTEM:(I)(RX)
BUILTIN\Administrators:(I)(RX)
BUILTIN\Users:(I)(RX)

Successfully processed 1 files; Failed processing 0 files

C:\Windows\system32>ICACLS C:\Windows\servicing\Packages\PA0BDB~1.MUM /grant Adm
inistrators:(F)
processed file: C:\Windows\servicing\Packages\PA0BDB~1.MUM
Successfully processed 1 files; Failed processing 0 files

C:\Windows\system32>DEL C:\Windows\servicing\Packages\PA0BDB~1.MUM

C:\Windows\system32>

---------------------------------

Reran SUR (Windows6.1-KB947821-v34-x64); CheckSUR.zip attached.


Attached Files
File Type: zip CheckSUR.zip (1.7 KB, 1 views)
My System SpecsSystem Spec
04 Aug 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Good - all we're left with now is the conventional error...
Code:
Summary:
Seconds executed: 1391
 Found 1 errors
  CSI Manifest Missing Total count: 1

Unavailable repair files:
	winsxs\manifests\x86_microsoft-windows-activexcompat_31bf3856ad364e35_8.0.7600.16424_none_111a1d2bdbb4550c.manifest
I'll post a fix protocol later.
My System SpecsSystem Spec
Reply

 SP1 Update repeatedly failing, error 0x80073712




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win7 sp1 x32 - Update error 0x80073712
Hello. I have a problem with update KB2891804 - error code 0x80073712. In checksur.log there are too many errors. ? will be able to help in a similar way? thanks in advance.:)
Windows Updates & Activation
Update Error 80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT(0x80073712)
I am having the exact same problems as the people who opened these threads: http://www.sevenforums.com/windows-updates-activation/330571-csi-unable-query-store-version.html http://www.sevenforums.com/windows-updates-activation/257903-csi-unable-query-store-version-total-count-1-a.html I have...
Windows Updates & Activation
Windows 7 Home Premium SP1 - repeated update error 0x80073712
Hey all, I have a lenovo tower running windows 7 home premium service pack 1, all seems to be working great except when I go to do updates, every update is installed except this one nagging one that fails repeatedly. The Update is Security Update KB2847927 and the error code is 0x80073712 ...
Windows Updates & Activation
Win7 sp1 x64 - Update error 0x80073712 (KB2943357)
Hello. I have a problem with update KB2943357 - error code 0x80073712. In checksur.log there are too many errors "CSI Manifest All Zeros". How can i fix it?
Windows Updates & Activation
Windows update repeatedly failing with 3 updates
Hello Frustrated with trying to fix this myself and thought I would turn to the forum for some help. I have been unable to install KB 2929437, KB 2871997, or KB 2830477 either as a group or individually. The error codes are all different and are below: KB 2929437: error 8007054F KB...
Windows Updates & Activation
Win7x64 Update Error 0x80073712 with KB 2844286
Hi! First of all, please forgive my real clumsy English - I hope it's at least understandable. I have difficulties with the last MS patch (July 9), the KB 2844286 (something with .NET Framework 3.5.1) doesn't install. I tried first to delete the accompanying Files KB 2832414, 283946 and 2840631...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App