Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows not genuine error, x8004fe22

22 Sep 2015   #11
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Actually - before we do that...
Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)


My System SpecsSystem Spec
.
22 Sep 2015   #12
mjuzz

Windows 7 Home Premium x64
 
 

Well now the CBS.log won't let me zip itself.. it keeps saying that access is denied for the file
My System SpecsSystem Spec
23 Sep 2015   #13
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

You need to copy it to the desktop before sipping the copy for upload
My System SpecsSystem Spec
.

23 Sep 2015   #14
mjuzz

Windows 7 Home Premium x64
 
 

Oh ok! Will do that after work in a few hours!
My System SpecsSystem Spec
23 Sep 2015   #15
mjuzz

Windows 7 Home Premium x64
 
 

The final file was over 40mb so i removed the files you mentioned before. Should i still post them separately?
My System SpecsSystem Spec
24 Sep 2015   #16
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

No significant errors in what was uploaded, so I don't think there's much point in going further back.

I'll get a list together of the necessary files for re-registration today and post it later (If I can find the time!)
My System SpecsSystem Spec
24 Sep 2015   #17
mjuzz

Windows 7 Home Premium x64
 
 

Ok I hope I will know how to do that haha! Thanks, take your time!
My System SpecsSystem Spec
27 Sep 2015   #18
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Open an Elevated Command Prompt, and run the following commands...

regsvr32 dispex.dll /s
regsvr32 gpscript.dll /s
regsvr32 jscript.dll /s
regsvr32 scripto.dll /s
regsvr32 scrobj.dll /s
regsvr32 scrrun.dll /s
regsvr32 vbscript.dll /s
regsvr32 wbendiso.dll /s
regsvr32 wshcon.dll /s


Then reboot, and post another MGADiag report. (we may have to repeat these commands for the 32-bit versions as well)
My System SpecsSystem Spec
27 Sep 2015   #19
mjuzz

Windows 7 Home Premium x64
 
 

ok the licensing info just got weirder?
Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-73CQT-WMF7J-3Q6C9
Windows Product Key Hash: KaFG+RmurcM3ZxzWyfEP9WtPUJw=
Windows Product ID: 00359-OEM-8992687-00010
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {1B24594A-96D7-4332-9654-6A69CEA2A9AB}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.150722-0600
TTS Error: 
Validation Diagnostic: 
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{1B24594A-96D7-4332-9654-6A69CEA2A9AB}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-3Q6C9</PKey><PID>00359-OEM-8992687-00010</PID><PIDType>2</PIDType><SID>S-1-5-21-3448261727-2982274412-759369397</SID><SYSTEM><Manufacturer>Hewlett-Packard</Manufacturer><Model>HP G62 Notebook PC              </Model></SYSTEM><BIOS><Manufacturer>Hewlett-Packard</Manufacturer><Version>F.36                 </Version><SMBIOSVersion major="2" minor="6"/><Date>20101006000000.000000+000</Date></BIOS><HWID>AADB3B07018400FC</HWID><UserLCID>0415</UserLCID><SystemLCID>0415</SystemLCID><TimeZone>Środkowoeuropejski czas stand.(GMT+01:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-MPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>  

Spsys.log Content: 0x80070002

Licensing Data-->
Uruchom na komputerze z systemem Microsoft Windows w wersji innej niż podstawowa polecenie „slui.exe 0x2a 0x8002801D”, aby wyświetlić tekst błędu.
Błąd: 0x8002801D 

Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 9:24:2015 07:42
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Not Registered - 0x80040155
HealthStatus Bitmask Output:


HWID Data-->
HWID Hash Current: LgAAAAEAAQABAAEAAAADAAAAAQABAAEAJJRognhARucAf3RVirUOrzjdnFpcXQ==

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information: 
  ACPI Table Name	OEMID Value	OEMTableID Value
  APIC			HPQOEM		SLIC-MPC
  FACP			HPQOEM		SLIC-MPC
  HPET			HPQOEM		SLIC-MPC
  BOOT			HPQOEM		SLIC-MPC
  MCFG			HPQOEM		SLIC-MPC
  WDAT			HPQOEM		SLIC-MPC
  ASF!			HPQOEM		SLIC-MPC
  SLIC			HPQOEM		SLIC-MPC
  ASPT			HPQOEM		SLIC-MPC
  SSDT			PmRef		CpuPm
My System SpecsSystem Spec
27 Sep 2015   #20
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

If you don't understand anything please ask!
First create a System Restore point, then....
Open Regedit
Navigate to
HKCR\TypeLib\{565783C6-CB41-11D1-8B02-00600806D9B6}

Right-click on the Key in the left pane, and select Permissions
Click on the Advanced button
Click on the Owner tab
Highlight Administrators, and put a tick in the 'Replace owner on...' box
Click Apply
(Current Owner should change to Administrators)
Click OK - ONCE
Click on the Permissions tab
In the Permission entries box, highlight Administrators
click Edit
put a tick in the Allow /Full Control box (all the other Allow boxes should automatically be ticked)
put a tick in the 'Apply these permissions....' box
Click OK out to Regedit
Close Regedit
Open an Elevated Command Prompt
run the following command

C:\Windows\Microsoft.NET\Framework\v4.0.30319\regtlibv12.exe C:\Windows\system32\wbem\wbemdisp.tlb

Close the Command prompt if successful - otherwise post the results.
Open Notepad
copy and paste the following into the Notepad window, and save to the desktop as TEST.VBS

Set objWMIService = GetObject("winmgmts:\\.\root\cimv2")
Set colComputers = objWMIService.ExecQuery("Select * from Win32_ComputerSystem")
wscript.echo "Test Passed"

now double-click on the new file - you should get a small popup window saying 'Test Passed'
If you get anything else, copy and paste the message to your reply.
Now reboot and run a new MGADiag report and post the results.
My System SpecsSystem Spec
Reply

 Windows not genuine error, x8004fe22




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Not Genuine error.
Hi Everyone One of my client computers is receiving a 'windows is not genuine error message' even after I changed the product key to an msdn volume license key... Here are the logs: Diagnostic Report (1.9.0019.0): ----------------------------------------- WGA Data--> Validation Status:...
Windows Updates & Activation
Windows Not Genuine Error
Over this past summer around June I helped my dad purchase retail copies of windows 7, and install/upgrade his work computers with Windows 7 professional 64 bit from the windows xp that they had all been running since it was no longer going to be covered by Microsoft. In the past month, all 5...
Windows Updates & Activation
Error with Genuine but Windows is 100% original (error 0x8004fe21)
Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data--> Validation Code: 0x8004FE21 Cached Online Validation Code: N/A, hr = 0xc004f012 Windows Product Key: *****-*****-K9WFV-6G4BF-MX898 Windows Product Key Hash: HYdsMUJM7ZHuIkEsHEREa81psRU=...
Windows Updates & Activation
Windows not genuine error
Hello, I have been getting this frustrating error and have attempted to fix it using guides and what not from google etc and nothing has worked so I decided to seek some professional help in this matter. As stated in the not genuine windows posting guide here is a copy of the MGADiag. I am...
Windows Updates & Activation
Windows 7 not genuine error
I have reformat my laptop, and everything going smoothly until I was prompted to resolve online because my Windows is not genuine. But I think it should not be like this as I have reformat from an original Windows 7 bundled with the laptop. So, I had asked the Microsoft support, but at the end,...
Windows Updates & Activation
Well, I have a BSOD error and a Windows is not genuine error
After re installing windows (for the 3rd time) on my Laptop using the code that came on the bottom of my laptop it said that it is not genuine. Also i am getting intermittent BSOD from Process ended that was critical.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App