System Restore failed

Hey.
I have a Netbook so i can not use any CD or so.
I followed the steps in the second option till "RegBack"
Now i have a problem do do theses steps:
ren default default.bak
ren sam sam.bak
ren security security.bak
ren software software.bak
ren system system.bak
copy RegBack\*.*

I tried to run the commands but it simply won't work.I get " 'system.bak' is not recogmized as an internal or external command, operable programm or batch files."
How do i exactly type in the above commandy after C:\Windows\System32\config>

It would make my life so much easier right now if i could get this fixed. Thank you very very much for your help! =)

jbaileyn said:

Sure, GTXND. Forgive me if I oversimplify but I'll include each step in case you're not familiar with navigating command lines (I was a tech support guy in college 20 years ago; old habits die hard). Also, changing registry files can be VERY DANGEROUS... I would only do it as a last resort before reinstalling Windows 7.

I first booted from the Windows 7 install disc to get to the system recovery console. I then selected Command Line. From there, I had to change from the X: drive to the C: drive by typing "C:". I then typed "cd \windows\system32\config" to get to the registry file directory. By typing "dir" I could see that two of the five hive files (default, sam, security,software, and system) had recent copies with an "rmbak" extension: default.rmbak and software.rmbak. I then executed the following commands:

ren software software.bak
copy software.rmbak software

ren default default.bak
copy default.rmbak default

I would suggest you execute the "ren" then "copy" commands as above for any other hives that have "rmbak" backups with the same date/time stamp. This ensures your registry remains in sync. You can now reboot and see if your computer comes up.

Here is an alternative suggestion if you don't have these "rmbak" files (if the above worked, don't do these steps; these would be a last-last resort before reinstalling Windows 7). From where we left off above type "dir RegBack". See what the time/date stamp is on the hive files there. If recent (use your judgment; mine is a couple days old so I would have probably used it had I not had the rmbak files, as I hadn't installed much in that time), you could do the following to restore that backup registry:

ren default default.bak
ren sam sam.bak
ren security security.bak
ren software software.bak
ren system system.bak
copy RegBack\*.*

Reboot and see what happens. If this worked, you may have to reinstall any software that was installed after the time/date stamps of the files in the RegBack directory.

One final note: I did try to restore to an earlier restore point once I made the above fixes. It kept coming up with an error. Therefore, I suggest creating a new restore point once the computer recovers, just so you have a clean one.

I still can't believe that worked. Some of the commands said "Command not found". But I typed in exactly what was said. Pressed Restart. Chose boot normally.BAM, there was my logon. Best feeling ever. thank you!!!!!!!!!!!!!!

jbaileyn said:

Here is an alternative suggestion if you don't have these "rmbak" files (if the above worked, don't do these steps; these would be a last-last resort before reinstalling Windows 7). From where we left off above type "dir RegBack". See what the time/date stamp is on the hive files there. If recent (use your judgment; mine is a couple days old so I would have probably used it had I not had the rmbak files, as I hadn't installed much in that time), you could do the following to restore that backup registry:

ren default default.bak
ren sam sam.bak
ren security security.bak
ren software software.bak
ren system system.bak
copy RegBack\*.*

Reboot and see what happens. If this worked, you may have to reinstall any software that was installed after the time/date stamps of the files in the RegBack directory.

One final note: I did try to restore to an earlier restore point once I made the above fixes. It kept coming up with an error. Therefore, I suggest creating a new restore point once the computer recovers, just so you have a clean one.

This worked like a charm for me on Windows 8. I was really stuck, can't believe that the MS tools can't perform such a simple fix automatically, what the &*^*%( is the automatic fix trying to do if it doesn't try this?

Hello Doug,

You can try doing the following.. I hope you will be able to recover from it..
Run System Restore in Safe Mode

Start Windows in safe mode. To run Windows in safe mode, turn on or restart your computer. When the splash screen from the PC’s manufacturer is displayed, hold down the F8 key. You will see a text based screen with several options appear that will look a lot like Figure 1 below. Using the up and down arrow keys, select the option “Safe Mode”, then hit the enter key on your keyboard. The computer will start Windows in safe mode which is Windows with a limited set of files and drivers. If Windows loads normally, try repeating the instructions above.
Next start System Restore. You can access System Restore from the System Tools menu in the Accessories group. Select the restore point that you want and follow the onscreen instructions. Your computer will restart, Windows will load and present a dialog box telling you whether or not System Restore was successful. If System Restore was not successful, try the next approach.

Run System Restore in a Clean Boot Environment
Start Windows by performing a clean boot. Below, there are links to instructions for different versions of
Next start System Restore. You can access System Restore from the System Tools menu in the Accessories group. Select the restore point that you want and follow the onscreen instructions. Your computer will restart, Windows will load and present a dialog box telling you whether or not System Restore was successful.

Where do I click to indicate that this has been solved? I only see links for "unsolved".

Found a work around to get system restore to work when it gives you this error. Did all the rest of the things everyone proposed but all no go. Although i still have to find out if the restore will work correctly or not, as it is working on the laptop as i'm typing this on my desktop. So, the trick was to change up drive letters in command line with diskpart command. Here are the steps to do so, as soon as you have the command prompt going.

-type "diskpart" in the command line (don't type in any of the quotes on any command, just using those to simplify determining where the command starts and stops)
-type "list volume"
-Now it shows you which volume is assigned which letter. in my case system reserved was volume 1 and windows drive was volume 2. so we need to remove the C from system reserved and swap out the letters.
-for my case, i typed "select volume 1" to select system reserved, just use volume number you got from previous step.
- then type "remove letter=c"
-then select windows drive volume, for my it was volume 2, so i typed "select volume 2"
-now type "assign letter=c"
-after that you need to go back to system reserved volume, as it needs a letter to be read and is needed for system restore. so again type "select volume 1" or whatever number you had.
-and finally type "assign letter=d"
-now you just have to type "exit" to get out of diskpart.

Then either go to c:\windows\system32 and type "rstrui" or exit the command prompt and click system restore. That should've done the trick and you will not get the system protection error anymore and will be able to restore like normal. Hope this helps some of you!! enjoy! :)

Jbaileyn - I never get what I need from forums...until now

Thanks for sending your advice and writing in such a way that anyone unfamiliar with command prompt could follow along. I thought I was going to have to take out in to a "professional". I'm glad I found your reply before I did...Thank you!!!

Hi.
I have found a way to resolve this problem :) The command should be:
Rstrui.exe /offline:C:\windows=active thats all, you will be able to restore system...

Dear all, thanks to your post System Restore failed, I also found a solution for my registry problem.

When running Windows 8.1 x64 a copy of the registry information is saved in c:\windows\system32\config\RegBack so you can make a copy of these registry files to your c:\windows\system32\config directory and that solved the issue I had of Windows 8.1 not starting up correctly after some modfication had been made manually to my registry (while using the PC Tune-Up application).

Success !