Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Macrium restore question

15 Jul 2011   #1
77273GU

Windows 7 Home Premium 64bit
 
 
Macrium restore question

My HD

Macrium restore question-d_management.png

When do I mark the image I'm restoring as active and when do I replace the MBR in the following scenarios.

1-If I'm restoring only the C partition.

2-If I'm restoring only the system reserved.

3- If I'm restoring both the system reserved and the C partitions. (One image)

If I understand correctly:
For #1 I would mark the restoration as primary and would not replace the MBR.
For #2 and #3 I would mark the restoration as active and replace the MBR.

My confusion really, is when to replace the MBR.

Thanks.




My System SpecsSystem Spec
.
15 Jul 2011   #2
mjf

Windows 7x64 Home Premium SP1
 
 

Correct. That's what I do anyway. I'm not sure when you'd just want option 2.

The MBR and system reserved can be restored without ill effect since they are quite static unless damaged or you do partition changes.
The main key rule is don't make C: (Boot...the windows partition) active if you have a system reserved partition. Otherwise make C: active.
My System SpecsSystem Spec
15 Jul 2011   #3
77273GU

Windows 7 Home Premium 64bit
 
 

Thanks for the conformation mjf. :)

I used option 2 to prove, to myself, that if its part of a restoration that is when I need to replace the MBR.
My System SpecsSystem Spec
.

Reply

 Macrium restore question




Thread Tools




Similar help and support threads
Thread Forum
Question about install new hdd and using macrium backup to restore
I just purchased a new hdd for my pc and before I install it have some questions. I plan to restore my macrium back up to it Will the new hdd have to be formatted or will the macrium restore process eliminate the need for a formatting? What can I expect after the hdd is installed and I turn...
Backup and Restore
Macrium Restore Question With New HD
You can see from my Disk Management that my C: and D: partitions are backed up to my F: and G:. My C: is getting full and I thought I would get a bigger HD and restore C: and D: to it. == I am not sure of the exact steps to follow to do this. I can install the new HD and have three in there at one...
Backup and Restore
Restore under Free Macrium - To a different HDD?
So far as I know, I created a valid Macrium free image of my OS which sits on my 750 Gb HDD. (hopefully I will never have to use it.) As part of this general task-set (getting my "recovery house" in order), I decided that I would resize the OS drive downwards and I created Macrium free...
Backup and Restore
Macrium Restore
Hi, I've created an 'image' of my internal hard drive C:\ to an external HD & I have no partitions. My question is when testing Macrium restore with a recovery disk I get to a screen asking me to select 'active', 'primary' or something else. I don't know which to select. I currently don't have any...
Backup and Restore
Macrium image restore
I tried a Macrium Reflect image restore of 2 partitions (100M system, c: 490G). I wanted to select the 2 partition boxes but Macrium would only select one - I tried control clicks etc. Can I only restore one partition at a time?
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App